Huge Lot 48 Tiger Heat Sinks, Precision Milled Aluminum 37mm x 37mm x 20mm Fins, US $59.95 – Picture 0

Huge Lot 48 Tiger Heat Sinks, Precision Milled Aluminum 37mm x 37mm x 20mm Fins, US $59.95 – Picture 1

Huge Lot 48 Tiger Heat Sinks, Precision Milled Aluminum 37mm x 37mm x 20mm Fins, US $59.95 – Picture 2

Huge Lot 48 Tiger Heat Sinks, Precision Milled Aluminum 37mm x 37mm x 20mm Fins, US $59.95 – Picture 3

Huge Lot 48 Tiger Heat Sinks, Precision Milled Aluminum 37mm x 37mm x 20mm Fins, US $59.95 – Picture 4

Huge Lot 48 Tiger Heat Sinks, Precision Milled Aluminum 37mm x 37mm x 20mm Fins, US $59.95 – Picture 5

Huge Lot 48 Tiger Heat Sinks, Precision Milled Aluminum 37mm x 37mm x 20mm Fins, US $59.95 – Picture 6

Huge Lot 48 Tiger Heat Sinks, Precision Milled Aluminum 37mm x 37mm x 20mm Fins, US $59.95 – Picture 7

Huge Lot 48 Tiger Heat Sinks, Precision Milled Aluminum 37mm x 37mm x 20mm Fins, US $59.95 – Picture 8

Huge Lot 48 Tiger Heat Sinks, Precision Milled Aluminum 37mm x 37mm x 20mm Fins, US $59.95 – Picture 9

Huge Lot 48 Tiger Heat Sinks, Precision Milled Aluminum 37mm x 37mm x 20mm Fins, US $59.95 – Picture 10

Huge Lot 48 Tiger Heat Sinks, Precision Milled Aluminum 37mm x 37mm x 20mm Fins, US $59.95 – Picture 11

Huge Lot 48 Tiger Heat Sinks, Precision Milled Aluminum 37mm X 37mm X 20mm Fins

US $59.95

Springfield, Tennessee, United States
Jan 29th

Open on mobile:
QR code

2455XB3D.2.52 New TTI (Tiger Technologies Inc.) RoHS Compliant Aluminum Heatsinks, Heat Sinks, Part Number A80-0000308-00L, or 210-E185761. Each bid quantity is for a Lot of Forty-Eight (48) Heatsinks. You may bid / buy any number of lots, up to the total quantity available above. These were purchased at an electronics supplier liquidation earlier this year, and they were brand new in the original factory boxes. We packaged them in heavy Ziplok bags so they will ship fast and cheap. These are either entirely milled, or they were extruded and then extensively milled after extrusion. Whichever way they were made, the resulting product is very precise and very flat. Considering the fin spacing and pattern, they could be used for either forced air (fan cooled) or ambient air (without a fan) applications. Comes with a pair of spring loaded nylon posts that hold the heatsink securely against the device being cooled. Or, if the nylon posts and aluminum ear tabs are not needed, they could be easily snipped off with a pair of side cutting pliers. The thermal conductive tape patch on the mounting surface is printed with "Parker Sentra Team." Best we can tell, it comes from Parker Hannifin's Chomerics Division. If you need a larger conductive area, we also have Thermagon Heat Conductive Pads that would be perfect for mounting these. Buy now, and get quality name brand heatsinks for less than the cost of cheap imported stuff. Note: The bags appear to show only two pieces per bag, however, the heatsinks are nested to protect the fins during shipment. There are four (4) pieces per bag, giving you a total of forty-eight (48) pieces per bid. According to the calipers Overall length (including mounting post ears): 1.986" / 50.44mm Length (excluding mounting post ears): 1.475" / 37.47mm Overall width: 1.477" / 37.51mm Height: .795" / 20.19mm Minimum web / base thickness: .108" / 2.73mm Mounting post diameter: .098" / 2.49mm Mounting post barb width: .153" / 3.90mm Mounting post spacing (measured parallel): 1.705" / 43.30mm x 1.198" / 30.44mm Mounting post spacing (measured diagonally): 2.099" / 53.31mm Mounting post length (spring fully compressed): .203" / 5.15mm Adhesive pad dimensions: .675" / 17.13mm (square)

Condition:	New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...	Brand	Tiger Technology Inc.
Other Names	Heat Sinks
Model	210-E185761
Construction	Precision Milled
MPN	A80-0000308-00L
Material	Aluminum Alloy
Type	Heatsinks
Feature #1	Pre Applied Heat Conductive Pads
RoHS Compliant	Yes
Feature #2	Spring Loaded Snap-In PCB Pins
Quantity	48
Color	Silver
Dimensions	37mm x 37mm x 20mm
SELLER LOCATION	USA