hydraulic pump rebuild for sale, brand-new and used.

You are looking at a Megatech Hydraulic Testing - Diagnosis - Repair - Rebuild - Fabrication table. This table has a Dayton 1hp 60hz 115V single phase motor powering a hydraulic pump with filter and reservoir. The table has a built in drain under the mesh top.

Removed from a 46 cj2a condition unknown, it is s Vickers pump and parts should be avail for rebuild if needed ,also comes with a two way control valve. Shipping ins for the lower 48. Thanks for looking!

Greenlee Hydraulic Pump Set, for rebuild. Ram moves and makes pressure, but oil seeps out of the top of the plunger. Selling AS IS, AS PICTURED, for parts or repair.

Vecoplan RG 42/30 Single Shaft Shredder Refurbished 30 HP 42” x 48” Feed Opening 10” diameter Ram 27 Cutters

Vecoplan Shredder RG 42/30 30 HP 42” x 48” Feed Opening 10” diameter Ram

This is a Wagner ST 2D scooptram for mining and tunneling. It has had a recent refresh that includes a rebuilt Deutz F6L912W engine. The tires are Yokohama 12:00 x 24 are in good condition and includes a spare wheel and tire.

Eaton Hydraulic Piston Pump PVH098R, recently pulled from service, I do not know why. Being sold as CORE for PARTS or REPAIR Weight 140 Lbs on a pallet You can set up shipping, or we can. We have a commercial address with a forklift for loading.

The item available here is a new old stock Vickers Rebuild Kit for vane pumps that is in excellent condition. It is new and has never been installed. It is a new item so if you purchase it and mount it, there will be no return policy as I will be unable to resell it as new.

Vickers Hydraulic Piston Pump PVH74QC 25V21R, recently pulled from service, I do not know why. Being sold as CORE for PARTS or REPAIR Weight 140 Lbs on a pallet You can set up shipping, or we can. We have a commercial address with a forklift for loading.

ENERPAC HYDRAULIC HAND PUMP This unit was removed from a shop and is in well used condition so you may need service or rebuild The hydraulic oil may be removed for shipping Used, cosmetically has some paint-off scratches/blemishes, rust, and is dirty Comes only as pictured so see/enlarge the pictures for more details

For Your Consideration: Clark CY200LBD 20,000lb Capacity This Lift has been entirely redone. 453 Detroit Motor cost $6000 to have an in-frame rebuild, all belts and water pump are new, supercharger was rebuilt, starter is new. Transmission has been re-built with all new bearings, clutches, and a new torque converter.

*1978 Caterpillar 518 * * The skidder is For Sale locally Also so Buy It Now before it is to late I have people calling to come look at it!!!! * Looking for a dozer with winch * You are more than welcome to come run it as much as you want I can give you directions. * Very good condition for the age * The hr meter quit

Haskel Air Driven Fluid Pump. IP-1182 (Replaced by DSTV-B10), Ratio 10:1, 1.5 HP, Max Air Pressure 150 PSI, Max Fluid Pressure 1600 PSI. Rebuilt but not tested.

This is a complete used HAAS CNC lathe hydraulic pump assembly. Pump was making some noise and needs to be rebuilt. We were running a job and was more cost effective time wise to purchase another assembly rather then the down time required to rebuild this one.

COMMERCIAL SHEARING Hydraulic Pump / MOTOR Model MD334LAAB15-35 NEW OLD STOCK. SOLD AS IS MAY HAVE DUST, RUST, MAY NEED REBUILD OR MAY WORK HAVE BEEN SETTING ON A SHELF FOR YEARS MAY HAVE OTHER IMPERFECTIONS Sold As Is Buyer mu

ebay template body{ background-color: #

The item available here is a remanufactured Oilgear industrial hydraulic pump that was remanufactured. It has never been installed since the rebuild, but unfortunately has sustained slight damage to the outer seal / bearing area and will most likely need that part repaired before being installed. It's being sold with a 14 day return policy from the date the item is shipped, but no return if the item is mounted.