i bolt for sale, brand-new and used.

PAPER CLAMP WASHER AND BOLT FOR CLARKE SE7/CE7 EDGERS These edgers can be used two ways: with hook and loop discs, or with plain paper discs using this clamp. Perhaps you've been using the hook and loop, and you'd rather use the cheaper plain discs, but you've lost track of the clamp that came with your edger. We also carry the self-adhesive hook and loop replacement disc

CONTROL LEVER PIVOT SHOULDER BOLT FOR CLARKE EZ-8 DRUM SANDER, FA-8 ABRADER CLARKE PART # 960952

This is a Crank Guard OR Oil Splash Shield, Part # 151F It is Complete with the Correct Mounting Bolts, For the 2 1/2 2 3/4 & 3 Hp Waterloo Gasoline Engine Co. Built Engines Commonly Known As "Contract Engines" That Use A Butterfly Type Governor In the flywheels, This is not For the Waterloo Boy Engines That Have the Fly-ball Type Governor Right behind the Cylinder. They Generally Use A flat Curved Guard.

This is a Crank Guard OR Oil Splash Shield, Complete with the Correct Bolts, For the 2 1/2 2 3/4 & 3 Hp Waterloo Gasoline Engine Co. Built Engines Commonly Known As "Contract Engines" That Use A Butterfly Type Governor In the flywheels, This is not For the Waterloo Boy Engines That Have the Fly-ball Type Governor Right behind the Cylinder. They Generally Use A flat Curved Guard.

HONDA GX340 GX390 EXHAUST MUFFLER +manifold+gasket a.imagelink {color:#3E4241;} a:hover.imagelink {color:#3E4241;} a:visited.imagelink {color:#3B426C;} a.imagelink img.auctionimage { bord

This clutch pulley is made by Edgemont Machine Company, & is a bolt on style clutch pulley. The Pulley is 16 inches diameter. The bolt on plate is 12 & 3/8 diameter.

This is a 4 bolt magneto bracket for a Associated or United engine. I am not sure what sizes it fits but I think it fits most of the smaller engines. It is ready to use.

2 NIECO BROILER BELT SUPPORT P/N 4048 2 new supports for the rod belt. The stainless steel sleeve is about 1/2" round x 2 1/2" long. Bolt and nut are steel.

2 NIECO BROILER BELT SUPPORT P/N 6055 4 new supports for the rod belt. The stainless steel sleeve is about 1/2" round x 1 1/4" long. Bolt and nut are steel.

Jevic Brand Container/Truck Bolt Locks Lot of 1,000 peices, 100 sheets including 10 locks each This product is brand new and unopened in it's original packaging. I am open to selling these in a lesser quantity, you can just message me with an offer if you'd like less than 1000.

I have a quantity of 13 of these bolts. I will sell them bulk or break quantity. Let me know what I can do to facilitate you.

I am selling 1 used stainless steel high vacuum bellows/flange. This piece is 3.5" long with an inside diameter of 2.25". The flange outside diameter is 5.5".

I am selling 1 used stainless steel high vacuum bellows/flange.  This piece is 3.25" long with an inside diameter of 2.25". The flange has an OD of 5.5" and has 4 bolt holes on each end.

Description Greenlee 500-4040 3/4" Draw Stud Bolt w/ Ball Bearing for 3/4" Through 1-1/2" Die Sets Bolt is in very good used condition. The threads are in very good condition. The bearing spins freely.

Here's 5 unopened u bolt kits. 2 1/2" across. I think the bolts are 1/4" or the next size up.

This auction is for a new 20 tooth magneto drive gear to fit 1 1/2 HP Associated gas engines with the 4 bolt magneto. This is the reproduction of gear part number GDVC. Please see pictures and ask questions if you have them.

this is new and loose from a box-- you are getting 7 total count Minerallac Conduit hanger in silver color features low-carbon cold-rolled steel construction and zinc-plated for high strength. It comes with bolt as well as nut and is uniquely designed to fix electrical conduit to hardware/mounting surface. Hanger is highly reliable and can be easily mounted on component/wood/steel/concrete.

This bolt cutter is the heavy duty model. Bolts, rebar, wire shelving etc are cut with a trigger pull. Includes manual and jaw adjusting wrenches.