IBM Processing (Plastic Processing Tools & Expendables) for sale, page 190

New 10 ton air cooled chiller | prm series

San Bernardino, California, United States
Jan 30th

PRM INTERNATIONALINDUSTRIAL AIR COOLED CHILLER10 TON MODEL: PRM-10ACI Available in 3Phase 220/480V Copeland Scroll Compressor Plate Heat Exchanger R-407C RefrigerantStainless Steel Piping/Water Tank 120,000BTU

New 1080 ton injection molding machine

San Bernardino, California, United States
Jan 30th

PRM INTERNATIONALPLASTIC INJECTION MOLDING MACHINE1080 TON UNIT Available in 3Phase 460V KEBA Series PLC ControllerFEA (Finite Element Analysis) PrecisionOptional Modular Designs: Fixed Pump, Variable Pump, Servo System, T-SlotOptional Auxil

New plastic auto loader | 880lbs/hr

San Bernardino, California, United States
Jan 30th

PRM INTERNATIONALPLASTIC AUTO LOADING DEVICEHAL MODEL: HAL-300GN Conveys 400kg/880lbs per hourAvailable in Single Phase 220VCarbon Brush Motor Stainless Steel ConstructionDetects and warns lack of materialsLoader and Receiver designed as t

New plastic auto loader | 990lbs/hr

San Bernardino, California, United States
Jan 30th

PRM INTERNATIONALPLASTIC AUTO LOADING DEVICEHAL MODEL: HAL-600GN Conveys 450kg/990lbs per hourAvailable in 3Phase 220VInduction Motor Stainless Steel ConstructionDetects and warns lack of materialsLoader and Receiver designed as two-piece

Two (2) 1974/1984 impco b-30-r180, # of heads on each: 2, platens on each: 24x30

Hainesport, New Jersey, United States
Jan 30th

Three (3) wortex up-750, throat on each: 7" x 50", 50hp

Burbank, California, United States
Jan 30th

1994 jomar 135e, l/d ratio 25:1, 125 hp, max die set size: 35.5" x 19.0"

Elk Grove Village, Illinois, United States
Jan 30th

1995 goodman gp600-7000, contact area: 3" x 8', small profile conveyor w/blowoff

Mankato, Minnesota, United States
Jan 30th

Allied 96" wide sheet die, thickness 0.50, restrictor bar, removable lower lips

Rochester, Michigan, United States
Jan 30th

Eight (8) incoe heaters with t/c -- xrh - 250a ----- 230 volts 200 watts

Anderson, South Carolina, United States
Jan 30th

YOU ARE BIDDING FOR A LOT OF EIGHT ( 8 ) INCOE XRC-250A HOT RUNNER HEATER/THERMOCOUPLE UNITS. THEY ARE RATED AT 230 VOLTS AND 200 WATTS. THEY ARE NOT IN ORIGINAL PACKAGE BUT ARE NEW UNUSED UNNEEDED INVENTORY.

Nissei ns10-1a injection molding machine 1996

Warminster, Pennsylvania, United States
Jan 30th

Machine has been cleaned, painted and run off. Can be inspected running, We can arrange shipping.For more information call 908-707-9907

Kawaguchi plastic injection molding machine

Kingwood, Texas, United States
Jan 30th

Taken out of service in the last (6) months is this older Kawaguchi K180-E. It is a 180 ton clamping unit. The machine was working when removed from service, but is being sold as is where is....

New fast heat ch025788hw heater element cartridge 240v-ac 6 in 1000w d256549

Delta, Ohio, United States
Jan 30th

Arburg - allrounder 221 (221-50-250) injection moulder

Greenwich, Connecticut, United States
Jan 30th

Arburg Allround 221 (221-55-250) Plastic Injection Moulding Machine. Manufactured in 1980. Owners Manual included.

Injection molding machine time, 15 - 250 ton in dallas, tx starting at $25/hr

Plano, Texas, United States
Jan 30th

MADE IN THE U.S.A, in Plano Texas $25 is the HOURLY RATE ON YOUR FIRST ORDER We take pride in American Quality and Craftsmanship.

1999 200 ton toyo electric, 200 ton, 7.03 oz, plcs-9 control

Anaheim, California, United States
Jan 30th

Krauss maffei 4130804 thermo switch ngt#08 for cd-94 mold

Fitchburg, Massachusetts, United States
Jan 30th

Item Number:US-018-D5.5J Krauss Maffei 4130804 Thermo Switch NGT#08 for CD-94 Mold. Stamped: A125 52N8533 12.44 mm high, 14.5 mm diameter. New/ Old Stock.

Diy plastic injector mold machine pdf and 3d plans

Santa Teresita, Buenos Aires, Argentina
Jan 30th

READ CAREFULLY BEFORE TO BUY WE ARE NOT SELLING A WORKING MACHINE HERE This is not parts for a machine asse

Newbury (1986) 150-ton 9.1 oz plastic injection molding machine

Watertown, South Dakota, United States
Jan 30th

1986 NEWBURY 150-TON PLASTIC INJECTION MOLDING MACHINERY MODEL H9-150ARS, 9.1 OZ (258 GRAMS), 1986, RELAY CONTROLS, 16" x 16" (406 MM x 406 MM) TBS, 24" x 24" (610 MM x 610 MM) PLATENS, 25 HP MOTOR WIRED AT 230V, DIMS: 19'L x 4'W x 7'H, WEIGHT: 11,000 LBS. This machine is in good running condition. It was running as of December 1st, 2014.

Newbury (1984) 150-ton 9.1 oz plastic injection molding machine

Watertown, South Dakota, United States
Jan 30th

1984 NEWBURY 150-TON PLASTIC INJECTION MOLDING MACHINERY MODEL H9-150ARS, 9.1 OZ (258 GRAMS), 1984, RELAY CONTROLS, 16" x 16" (406 MM x 406 MM) TBS, 24" x 24" (610 MM x 610 MM) PLATENS, 25 HP MOTOR WIRED AT 230V, DIMS: 19'L x 4'W x 7'H, WEIGHT: 11,000 LBS This machine is in good running condition. It was running as of December 1st, 2014. The reason for selling is the company's owners are retiring.