impeller blade for sale, brand-new and used.

Excellent Condition Eppendorf Celligen Blu Disposable Bioreactor Was purchased for a research project and used for a short time. Includes extra vessels, acessories, and all necessary components for immediate use. AUTOCLAVE-FREE Bioreactor!

$15000, In good working condition. *Pre-sweeps and aggressively scrubs at the same time *42 inch (1067 mm) sweep path covers 67,000 sq.ft.

(one) chemical slurry mixing blending pump transfer skid, includes slant bottom intake hopper, 30" x 28" x 36" deep with 12" opening at top, Effector high and low limit proximity sensors, hopper bottom electric vibrator, 9’ long x 4" diameter auger screw feeder that dumps into a 16" x 18" x 50" high pre-mix tank compartment with Mamec Oy mixer agitator, model HDS 5.5/1000, 6.5 KW, 1150 rpm, 440/480 vac, direct drive with dual stagger tooth impellers.

Model GV230 Belt Driven Gas Vacuum is

Description: excellent condition Safety motor cover prevents wet hands from touching the electric motor and operators hair from blowing between the motor and belt guard. Motor cover is removable for easy motor access Front mounted heavy duty, double throw, industrial motor switch is conveniently located and provides years of trouble free service.

Check out my Storesother items! PRODEVA GLASS CRUSHER MODEL 95-6 SN: 5621 EQUIPPED WITH 1/2HP MOTOR, 115V, 60Hz, 1Ph6-3/4" WIDE X 7" DIAMETER, 6-BLADE IMPELLER.

Up for sale is a Brand New Unused Goulds RGS2012 Waste Water submersible grinder pump MODEL INFORMATION 2 HP 208/230 Volt Single Phase 20 Ft Cord with Bare Leads APPLICATIONS Designed for high head residential sewage applications where a gravity system is not practical. Ideal for pressure sewage systems. FEATURES Design Capable of grinding domestic sewage in individual residential applications.

This mixer is very gently used. It has been used to mix about 4 55 gallon drums in it's life. While expensive....that's all I needed it for.

NEW CHEMINEER .5 HP 360 RPM MIXER, 240/480 V, LTG-5T, UNUSED. HAS SOME SCRAPED PAINT FROM STORAGE. STAINLESS IMPELLER INCLUDED.

This lot consists of the following parts.

This listing is for ONE used RAVEN INDUSTRIES brand 120 gallon capacity Fiberglass Reinforced Tank with ONE very quiet running VEKTOR LIGHTNIN brand 3 phase, 230/460 volt 1/4 HP 1750 RPM motor and ONE Stainless Steel shaft that is approximately 55" long with ONE 3 blade impeller as pictured. Your inspection is welcome by contacting me at jwasas@GreatAmericanMint.com to set-up an appointment.

Payment Policy New Page 1 Brand New Sony CyberShot 8 MP Di  

Heidolph RZR1 Overhead Stirrer w/ Straight Blade Impeller 115V 60Hz 87/23W 35-250/280-2200 1/min Thanks for viewing! Check out my other items!

THE FOLLOWING PARTS ARE SOLD AT A LOT PRICE WITH FREE SHIPPING P/N DISCRIPTION QTY

Blade set Impeller 316SS TBN HE3-06-D for 35in Chemineer Unused This is an unused impeller blade set made by Chemineer, part number TBN HE3-06-D. Price includes 3 blades Tag states this is for a 35 inch HE-3 impeller 316 stainles steel Dimensions (single blade): Length: 14 13/16 inches Width: 6 1/16 inches Thickness: 0.39 inches Specifications: MFG: Chemineer Model: TBN HE3-06-D Serial: Volts: &nbs

Coated 1" Mixer Shaft + Impeller Assy 14.5" OD 68" Long

(one) Cast stainless steel prop type mixer impeller , 16" diameter , 3 blade , 1 3/16" x 3 1/4 " bore , 1/4 " keyway . $20 shipping in the continental U.S. You can send text messages to my cellphone at 9374165497@vtext.com D-12038 If you have any questions, please email me!

CFM Continental Fan MNC Mixed Flow Cooling Fan MNC400 1750 RPM 1.5HP CFM Mixed Flow Cooling Fan, Model MNC400 rated at 1750RPM and with a Brook Crompton 1.5HP motor. Suitable for a variety of uses from cooling to air filtration. This unit was used in a computer rack to keep computer cool.