Indexable Tool Holders

The average price for current category was $84.77 last month.

There are 3878 ads in this category.

NEW 3/4" X 5" INSERT END MILL W/ INSERTS DESIGNED FOR CNC RAMP MILLING FREE SHIP

New 3/4" x 5" insert end mill w/ inserts designed for cnc ramp milling free ship

  • Seekonk, Massachusetts, United States
  • Jan 30th
BRAND NEW TOOLMEX-PALBIT BRAND. MADE IN PORTUGAL. 3/4" DIAMETER X 3/4" SHANK X 5" OAL.
NEW 1 1/4" X 6" INSERT END MILL W/ INSERTS DESIGNED FOR CNC RAMP MILLING

New 1 1/4" x 6" insert end mill w/ inserts designed for cnc ramp milling

  • Seekonk, Massachusetts, United States
  • Jan 30th
BRAND NEW TOOLMEX-PALBIT BRAND. MADE IN PORTUGAL. 1 1/4" DIAMETER X 1 1/4" SHANK X 6" OAL.
TMX GTN-2 DOUBLE END INDEXABLE CUT OFF BLADE TOOLMEX

Tmx gtn-2 double end indexable cut off blade toolmex

  • Largo, Florida, United States
  • Jan 30th
TMX GTN-2 DOUBLE END INDEXABLE CUT OFF BLADE Brand New 26-2 Indexable Cut Off Blade Accepts GTN-2 Style Inserts Comes with Extractor PN: 6-895-262 Compare to list price at $68.94! When cutting off solid bar to center, cutting edge should be .004"-.006" above center height
10 New DNGG432ML TT5080 Inserts ** Ingersoll DNGG150408ML **

10 new dngg432ml tt5080 inserts ** ingersoll dngg150408ml **

  • Spring Valley, California, United States
  • Jan 30th
Inserts are NEW 10 Pieces in Factory Pack Fast Free First Class Shipping Thank You
INSERT TOOL HOLDERS

Insert tool holders

  • San Jose, California, United States
  • Jan 30th
5 USED INDEXABLE TOOL HOLDERS. 1 INCH SHANK. 1 EACH RIGHT & LEFT TURNING.
ISCAR Indexable Grooving Toolholder GHSR 9.5-2    (used once)

Iscar indexable grooving toolholder ghsr 9.5-2 (used once)

  • Upland, California, United States
  • Jan 30th
ISCARIndexable Grooving Toolholder (used once)with used insert. No wrench GHSR 9.5-2Type: ExternalHand: Right HandMax Depth of Cut: .7500"Min Groove Width: 0.0870"Overall Length: 4.7200"
Sandvik 3 flute insert mill 3/4 inch

Sandvik 3 flute insert mill 3/4 inch

  • Simi Valley, California, United States
  • Jan 30th
Sandvik RA 215 44-19mn 19.09c 3 insert end mill Used but little has original inserts still in it These cost over $200 Check the pictures it's almost new
CARBOLOY CLP-310 CAMS (10 PCS)

Carboloy clp-310 cams (10 pcs)

  • Cadiz, Kentucky, United States
  • Jan 30th
(10 pcs. New) CARBOLOY CLP-310 CAMS, overall length 1-1/4" Stock location I-60
CARBOLOY CLP-312 CAMS (10 PCS)

Carboloy clp-312 cams (10 pcs)

  • Cadiz, Kentucky, United States
  • Jan 30th
(10 pcs. New) CARBOLOY CLP-312 CAMS Stock location I-60
Sandvik MTGNR 12 3A Carbide Insert Tool Holder 3/4" sq. [1only]

Sandvik mtgnr 12 3a carbide insert tool holder 3/4" sq. [1only]

  • Surrey, British Columbia, Canada
  • Jan 30th
Sandvik Coromant 3/4"sq. X 4" long carbide insert tool holder. Uses inserts MTN-322.
KENNAMETAL &? INDEX. TOOLS,3/4"x3/4"x4.5", 1"x1"x6", 2 pieces

Kennametal &? index. tools,3/4"x3/4"x4.5", 1"x1"x6", 2 pieces

  • Millington, Michigan, United States
  • Jan 30th
Used! Indexable lathe tools. MAKE: Kennametal & Unknown, U.S.A.
Allis Chalmers FMJ4B3 Magneto Fairbanks Morse Refurbished

Allis chalmers fmj4b3 magneto fairbanks morse refurbished

  • Camas, Washington, United States
  • Jan 30th
The terminal screw has been replaced with a durable stainless steel one. Every part of it has been carefully disassembled, cleaned, and restored. It features a new coil, condenser, ball bearing, and a recharged magnet.
Wico C early Wisconsin Magneto Refurbished

Wico c early wisconsin magneto refurbished

  • Camas, Washington, United States
  • Jan 30th
Here is a sharp looking Wico Model C counterclockwise base mount magneto for some early Wisconsin engines.Check your parts book to be sure. These appeared in the mid to late 1930's. It has been completely disassembled, washed, blasted, primed and painted with automotive chassis black.
John Deere Wico C Short Lug 1042 Magneto

John deere wico c short lug 1042 magneto

  • Camas, Washington, United States
  • Jan 30th
Here is a refurbished Wico C counterclockwise short lug magneto with a 35 degree lag angle. It has been completely disassembled, all parts washed and relubed. Coil cover shows some weathering and is very presentable.
AC Voltmeter 115 Volts For Generator Military

Ac voltmeter 115 volts for generator military

  • Camas, Washington, United States
  • Jan 30th
Here is a sealed well made Honeywell AC panel voltmeter made for the Military that was apparently designed for monitoring AC line voltage on a panel or generator set. It mounts in an approximately 2 3/4" diameter hole. The outside bezel measures 3 1/2".
New Indexable turning tool holder 95 Degree MWLNR2020K08 CNC Lathe

New indexable turning tool holder 95 degree mwlnr2020k08 cnc lathe

  • Shanghai, China
  • Jan 30th
256600-101 Description: 100% Brand New Product Name: Turning Tool Holder Model: MWLNR2020K08 Material: Alloy, Steel
KENNAMETAL INDEXABLE THREADING TOOL HOLDER MODEL NSR163D & TNSR12-3B w/ inserts

Kennametal indexable threading tool holder model nsr163d & tnsr12-3b w/ inserts

  • Muncie, Indiana, United States
  • Jan 30th
KENNAMETAL INDEXABLE TOOL HOLDER MODEL NSR163D NJ6 1" Shank & SHARS TNSR12-3B 3/4" shank with inserts There are 4 new NT-3R (424-0767) Inserts 3) 1 NEW 2 USED KC5010 N63072R 2 USED EXTERNAL THREADERS 2) 1 NEW 1 USED .125 GROOVE KC5010 N63125R 2) 1NEW 1 USED .088 GROOVE KC5010 N63M225RK PLEASE EMAIL WITH ANY...
Carbide Mill Insert, R245-12 T3 E-W 1010, Pack of 10

Carbide mill insert, r245-12 t3 e-w 1010, pack of 10

  • Booneville, Mississippi, United States
  • Jan 30th
New pack of 10 inserts.
6" VALENITE CARBIDE INSERT INDEXABLE FACE MILL M1008433 4T6 (BIN33)

6" valenite carbide insert indexable face mill m1008433 4t6 (bin33)

  • Fenton, Michigan, United States
  • Jan 30th
var itemNumber = window.ebayItemID ?
6" VALENITE CARBIDE INSERT INDEXABLE FACE MILL M1008433 4T6 (BIN162)

6" valenite carbide insert indexable face mill m1008433 4t6 (bin162)

  • Fenton, Michigan, United States
  • Jan 30th
var itemNumber = window.ebayItemID ?

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies