+ Post new Ad

Indexable Tool Holders

The average price for current category was $84.77 last month.

There are 3878 ads in this category.

10 Pcs. Sandvik RA216-32 06 M-M, 1025 CoroMill BN EM Inserts

10 pcs. sandvik ra216-32 06 m-m, 1025 coromill bn em inserts

  • Hamden, Connecticut, United States
  • Jun 7th
10 Pcs. Sandvik-Coromant Brand New RA216-32 06 M-M, 1025 CoroMill Ball Nose Endmill Milling Inserts, RA216-32 06 M-M, 1025 (EDP Code: 69826203402) Grade: 'GC1025 is a PVD (TICN/TiN) coated grade with a very fine grained substrate. The design of the grade provides excellent properties to keep closed tolerances and excellent surface finish for finishing of stainless steel.' - 'For high quality surface finish in stainless steel.
10 Pc Sandvik N331.1A-04 35 05H-ML CoroMill 331 Inserts

10 pc sandvik n331.1a-04 35 05h-ml coromill 331 inserts

  • Hamden, Connecticut, United States
  • Jun 7th
10 Pcs. Sandvik-Coromant Brand New N331.1A-04 35 05H-ML, 2030 CoroMill 331 Milling Inserts, N331.1A-04 35 05H-ML, 2030 (EDP Code: 69826203596) Grade: GC 2030 (HC)-M25 (M15 - M35), PVD coated carbide grade for milling of stainless steels (mainly austenitic types) at medium to high speeds. Combined with postive geometries, also suitable for heat resistant material and titanium.
10 Pcs. Sandvik RCKT 19 06 00-MM CoroMill 200 Milling Inserts for Stainless

10 pcs. sandvik rckt 19 06 00-mm coromill 200 milling inserts for stainless

  • Hamden, Connecticut, United States
  • Jun 7th
10 Pcs. Sandvik-Coromant Brand New RCKT 19 06 00-MM, 2040 CoroMill 200 Milling Inserts, RCKT 19 06 00-MM, 2040 (EDP Code: 69826204279) Grade: GC 2040 (HC)-M30 (M20 - M40), Coated carbide grade for milling of stainless steels with abrasive tendencies, e.g. cast componenets, ferritic/martensitic stainless steels and PH steels at medium speeds.
10 Pcs. Sandvik R151.2-5F .157", 2135 T-Max Parting Inserts

10 pcs. sandvik r151.2-5f .157", 2135 t-max parting inserts

  • Hamden, Connecticut, United States
  • Jun 7th
10 Pcs. Sandvik-Coromant Brand New R151.2-400 05-5F, 2135 T-Max Q-Cut Parting Inserts for deep grooving Part Number la Inch la mm Angle re inch re mm R151.2-400 05-5F .157
Sandvik RA390 3" Indexable Sq. Shoulder Facemill Kit w/ R390-17 04 08 Inserts

Sandvik ra390 3" indexable sq. shoulder facemill kit w/ r390-17 04 08 inserts

  • Hamden, Connecticut, United States
  • Jun 7th
1 Pc. Sandvik-Coromant Brand New CoroMill RA390 3" 17mm Insert Indexable Square Shoulder Milling Cutter w/ 10 Pcs. of R390-17 04 08E-PL, 1030 Milling Inserts, For deep and shallow shoulder milling.
Sandvik 880 1" x 3Dc CoroDrill Indexable Drill Kit-Includes 20 Inserts

Sandvik 880 1" x 3dc corodrill indexable drill kit-includes 20 inserts

  • Hamden, Connecticut, United States
  • Jun 7th
1 Pc. Sandvik-Coromant Brand New CoroMill 880 3 x Dc 1" Indexable Drill w/ 10 Pcs. of 880-05 03 05H-C-LM, 1044 Central & 880-05 03 W08H-P-LM, 4024 Peripheral Inserts.
10 Pcs. Sandvik CoroMill 200 RCHT 13 04 00-PL PVD Coated Carbide Milling Inserts

10 pcs. sandvik coromill 200 rcht 13 04 00-pl pvd coated carbide milling inserts

  • Hamden, Connecticut, United States
  • Jun 7th
10 Pcs. Sandvik-Coromant Brand New RCHT 13 04 00-PL, 1030 CoroMill 200 Milling Inserts, RCHT 13 04 00-PL,1030 (EDP Code: 69826233428) Grade: GC 1030 (HC)-P30 (P25 - P50), PVD Coated carbide grade. GC1030 is the first choice in unstable conditions like long edge, chip jamming, deep shoulder are endmilling, long overhang, turnmill opertations, etc.
10 Pcs. Sandvik CoroMill 200 RCKT 13 04 00-PH Milling Inserts-Stainless Casting

10 pcs. sandvik coromill 200 rckt 13 04 00-ph milling inserts-stainless casting

  • Hamden, Connecticut, United States
  • Jun 7th
10 Pcs. Sandvik-Coromant Brand New RCKT 13 04 00-PH, 4240 CoroMill 200 Milling Inserts, RCKT 13 04 00-PH, 4240 (EDP Code: 69826233338) Grade: GC 4240 (HC) - M40 (M20 - M40), Coated carbide grade for medium to heavy operations in stainless steel castings. Very suitable for small batch production of mixed materials.
10 Pc Sandvik R245-12 T3 E-PL Inserts for CoroMill 245 Indexable Face Mill

10 pc sandvik r245-12 t3 e-pl inserts for coromill 245 indexable face mill

  • Hamden, Connecticut, United States
  • Jun 7th
10 Pcs. Sandvik-Coromant Brand New R245-12 T3 E-PL, 1030 CoroMill 245 Milling Inserts, R245-12 T3 E-PL, 1030 (EDP Code: 69826233372) Grade: GC 1030 (HC)-P30 (P25 - P50), PVD Coated carbide grade. GC1030 is the first choice in unstable conditions like long edge, chip jamming, deep shoulder are endmilling, long overhang, turnmill opertations, etc.
10 Pcs. Sandvik CoroMill 390 R390-11 T3 08E-PL CoroMill 390 Milling Inserts

10 pcs. sandvik coromill 390 r390-11 t3 08e-pl coromill 390 milling inserts

  • Hamden, Connecticut, United States
  • Jun 7th
10 Pcs. Sandvik-Coromant Brand New R390-11 T3 08E-PL, 1030 CoroMill 390 Milling Inserts, R390-11 T3 08E-PL, 1030 (EDP Code: 69826233457) Grade: GC 1030 (HC)-P30 (P25 - P50), PVD Coated carbide grade. GC1030 is the first choice in unstable conditions like long edge, chip jamming, deep shoulder are endmilling, long overhang, turnmill opertations, etc.
10 Pcs. Sandvik CoroMill 390 R390-17 04 08E-PL CoroMill 390 Milling Inserts

10 pcs. sandvik coromill 390 r390-17 04 08e-pl coromill 390 milling inserts

  • Hamden, Connecticut, United States
  • Jun 7th
10 Pcs. Sandvik-Coromant Brand New R390-17 04 08E-PL, 1030 CoroMill 390 Milling Inserts, R390-17 04 08E-PL, 1030 (EDP Code: 69826233483) Grade: GC 1030 (HC)-P30 (P25 - P50), PVD Coated carbide grade. GC1030 is the first choice in unstable conditions like long edge, chip jamming, deep shoulder are endmilling, long overhang, turnmill opertations, etc.
10 Pcs. Sandvik CoroMill 390 R390-17 04 08M-PH CoroMill 390 Milling Inserts

10 pcs. sandvik coromill 390 r390-17 04 08m-ph coromill 390 milling inserts

  • Hamden, Connecticut, United States
  • Jun 7th
10 Pcs. Sandvik-Coromant Brand New R390-17 04 08M-PH, 4240 CoroMill 390 Milling Inserts, R390-17 04 08M-PH, 4240 (EDP Code: 69826233484) Grade: GC 4240 (HC) - M40 (M20 - M40), Coated carbide grade for medium to heavy operations in stainless steel castings. Very suitable for small batch production of mixed materials.
10 Pcs. Sandvik 90R-08T308M-MM CoroMill 490 Milling Inserts

10 pcs. sandvik 90r-08t308m-mm coromill 490 milling inserts

  • Hamden, Connecticut, United States
  • Jun 7th
10 Pcs. Sandvik-Coromant Brand New 490R-08T308M-MM, 1040 CoroMill 490 Milling Inserts, 490R-08T308M-PM, 1040 Grade: GC 1040 (HC) - M35 (M25 – M40), PVD-coated carbide grade and first choice in austenitic and duplex stainless steels. Secure performance with long-lasting sharp cutting edges, keeping cutting forces low.
kendex tool holder sp-32 ku-1130c spg 322

Kendex tool holder sp-32 ku-1130c spg 322

  • Gardena, California, United States
  • Jun 7th
good condition cnc tool holder, kendex use's spg 322 insert, cl-9 clamp and stc-9 diff screw are missing
NIKCOLE MINI-SYSTEMS THE-7-1/2-L GROOVER TOOL HOLDER

Nikcole mini-systems the-7-1/2-l groover tool holder

  • Stanley, North Carolina, United States
  • Jun 7th
Up for bid is a NIKCOLE MINI-SYSTEMS THE-7-1/2-L Tool Holder 1/2" Square Shank. Please see pictures for more details, please ask any questions before bidding, thank you for viewing my item. Check out my other items!
NIKCOLE MINI-SYSTEMS THE-7-1/2-R GROOVER TOOL HOLDER

Nikcole mini-systems the-7-1/2-r groover tool holder

  • Stanley, North Carolina, United States
  • Jun 7th
Up for bid is a NIKCOLE MINI-SYSTEMS THE-7-1/2-R Tool Holder 1/2" Square Shank.there are 2 of these items this sale is for 1 item. Please see pictures for more details, please ask any questions before bidding, thank you for viewing my item. Check out my other items!
Sandvik N151.2-600-50E-P CB20 CBN Profile Insert, pack of 5 inserts

Sandvik n151.2-600-50e-p cb20 cbn profile insert, pack of 5 inserts

  • Southampton, Pennsylvania, United States
  • Jun 7th
New sandvik coromant N151.2-600-50E-P CB20 CBN Profile Insert, pack of 5 inserts
INDEXABLE TOOLHOLDER CTGPR-2525 SQUARE SHANK USED

Indexable toolholder ctgpr-2525 square shank used

  • Bear, Delaware, United States
  • Jun 7th
INDEXABLE TOOLHOLDER CTGPR-2525 SQUARE SHANK USED USED WITH NORMAL WEAR FAST SHIPPING....THANK YOU!
BORING BAR WITH MICROMETER ADJUSTABLE CARBIDE INSERTS 070 BAO OTC 3 N

Boring bar with micrometer adjustable carbide inserts 070 bao otc 3 n

  • Fort Myers, Florida, United States
  • Jun 7th
7" LONG X 1/2" SHANK CARBIDE INDEXABLE INSERT BORING BAR WITH MICROMETER ADJUST. APPROX. 2-1/4" DIAMETER CLEARANCE.
ISCAR GIP2.70-010 IC20 Gd 0.1063" Width Carbide Double End Grooving Insert NEW!!

Iscar gip2.70-010 ic20 gd 0.1063" width carbide double end grooving insert new!!

  • Largo, Florida, United States
  • Jun 7th
ISCAR GIP 2.70-010 IC20 Grade 0.1063" Width of cut Carbide Double End Grooving Inserts Box of 10 inserts Brand New ISCAR Carbide Inserts Box of 10 inserts Solid Carbide is extremely heat resistant and used for High Speed Applications It is commonly used on Cast Iron, Nonferrous materials, Plastics and other tough-to-machine materials Specs: Insert Style: GIP

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies