ingersoll drills for sale, brand-new and used.

BRAND NEW WITH 2 EXTRA TORX SCREWS. Indexable Insert Drills; Drill Diameter (mm): 19.00; Drill Diameter (Decimal Inch): 0.7480; Drill Depth by Diameter Ratio: 3xD; Maximum Drill Depth (Decimal Inch): 2.2500; Shank Type: Universal; Shank Diameter (Decimal Inch): 1.0000 Drill Diameter (mm) 19.00 Drill Diameter (Decimal Inch) 0.7480 Drill Depth by Diameter Ratio 3xD

Thousands of Used Metalworking and Plastic Machines & New Machine Tools Photos, Full Descriptions and Prices - Fast & Easy

Up for grabs is this set of 2 ea Ingersoll Rand drills In very good condition these tools have been tested cleaned and lubed they are very reliable drills made in the USA they both run at 6000RPM They both have quck disconect type chucks for easy drill changes. Please ask any questions you may have before bidding

New Atlas Copco / Ingersoll rand temperature sensor / switch for ECM drills

LOT OF 2PC TWIST DRILLS AND 5 BOXES OF INGERSOLL TPA1110R01 IN2505 D.438'' D 11.1 1-PC INGERSOLL TDO800064B9R01 .315-330/ TWIST DRILL/ 1PC-INGERSOLL TD1100055C0R01 .4331-4488 TWIST DRILL

Thousands of Used Metalworking and Plastic Machines & New Machine Tools Photos

Thousands of Used Metalworking and Plastic Machines & New Machine Tools Photos

P-250 Ingersoll Rand air compressor, starts and runs good. 250 CFM @ 100 psi 0225 hours 4 cyl diesel, screw drive fresh oil and filter change, new fuel filters. Great for blowing out sprinklers, blowing out combines, cleaning equipment, or run double jack hammers, drills, Sandblasting, etc...

Up for grabs is this Ingersoll Rand pnematic drill In very good condition it has been tested cleaned and lubed these are very reliable drills made in the USA it runs at 6000RPM It has quick disconect type chucks for easy drill changes. Please ask any questions you may have before bidding

Up for grabs is this Ingersoll Rand pnematic drill In very good condition it has been tested cleaned and lubed these are very reliable drills made in the USA This is a surplus tool from a major aviation manufacturer in the US it runs at 6000RPM It has a 0-3/8 capacity 31BA THD 3/8-24 Jacobs chuck Please ask any questions you may have before bidding

_____________DESCRIPTION____________ VERY RARE ANTIQUE 1905 INGERSOLL RAND JACKHAMMERS & JACKBITS NEW YORK CITY WHITEHEAD HOAG BRASS WATCH FOB EXCELLENT CONDITION / VERY HARD TO FIND / ORIGINAL ADVERTISING WATCH FOB FOR INGERSOLL-RAND NEW YORK / CIRCA 1905 ... In 1905 Ingersoll-Sargeant Drill Company merged with the Rand Drill Company to form Ingersoll Rand... / MEASURES 1 5/8ths INCHES WIDE (Horizontal) / MEASURES 1 7/8ths INCHES HIGH (Vertical) / FRONT READS: ...

Ingersoll Rand 7LJ2A41 7 Series Angle Drill The popular 7 Series Angle Drills deliver results day after day. And excellent power-to-weight ratio gets the job done with less fatigue. Available with Aerospace Heads (A1models) or standard chucks.

One NEW! CHICAGO-LATROBE/ GREENFIELD INDUSTRIES 55/64" (.8593") HSS GP-TPR-OIL HOLE DRILL. NEW IN BOX PART / EDP# : 54955 Coolant Thru MADE in USA SHANK # 55/64" (.859") FLUTE LENGTH : 6-1/2" OVER ALL LENGTH : 10-3/4"

var itemNumber = window.ebayItemID ?

PARABOLIC Jobbers Length Drills 31/64" Parabolic flute drills are designed for deep hole drilling (a deep hole is any hole that is deeper than 4 times the diameter of the drill bit). The special flute pattern is capable of drawing chips up quickly from deeper distances. This eliminates the need for frequent drill withdrawal to clear chips from the hole.

PARABOLIC Jobbers Length Drills 15/32" Parabolic flute drills are designed for deep hole drilling (a deep hole is any hole that is deeper than 4 times the diameter of the drill bit). The special flute pattern is capable of drawing chips up quickly from deeper distances. This eliminates the need for frequent drill withdrawal to clear chips from the hole.

PARABOLIC Jobbers Length Drills 3/8" Parabolic flute drills are designed for deep hole drilling (a deep hole is any hole that is deeper than 4 times the diameter of the drill bit). The special flute pattern is capable of drawing chips up quickly from deeper distances. This eliminates the need for frequent drill withdrawal to clear chips from the hole.

DORMER Screw Machine Length Drills A230 - - 5/32" - - Pack of 10 Bits HSS - Drills - - Right Hand ______________________________ These standard helix bits have a 135° split point with a straight shank.

DORMER Screw Machine Length Drills A230 - - #1 - - Pack of 10 Bits HSS - Drills - - Right Hand ______________________________ These standard helix bits have a 135° split point with a straight shank.