inlet pipe for sale, brand-new and used.

Pneumatic press machine small desktop 50 type punch machine press 200KG Model 50

Pneumatic press machine small desktop 100 type punch machine press 500KG Cylinder

Pneumatic press machine small desktop 80 type punch machine press 300KG Note:

Description 7" Wet Air Saw/Cutter for heavy duty cutting of granite, concrete and other types of stones. It will accept diamond blades up to 7" in diameter.

5" Gison Wet Air Sander / Polisher GPW-933A GPW-933A is a heavy duty air polisher most used for wet surface polishing of stone and concrete. The soft plastic shroud can prevent water from splashing all over.

4" Gison Water-Fed Wet Air Polisher GPW-7 Gison GPW-7 is a Water-Fed wet air polisher suitable for polishing of granite, marble, concrete and other types of stones.

From a local coffee shop that closed after 1 year of operation. Very clean working unit. The machine was tested however during the transportation back the inlet brass water pipe broke.

2.5 Inches over all width. The out side diameter of the hole is .875 of an inch, or 7/8ths. This can be used with 1/2 Iron pipe (black iron aka gas pipe).

USA Daily Deals Krowne - 12-814 - Wall Mount Faucet w/ 8" Centers & 14" Spout

Brand New in Manufacturer BoxFast, Free and Safe Shipping to the lower 48 States

Rated for 450 CFM at 100 PSIG Max pressure 150 PSI Max Temp 120 degree's Runs on 85 to 264 Volt Single phase. 47 to 63 HZ Desiccant has to be changed at 8000 hrs, Onboard control system shows 5641 hrs life remaining. Tested everything functioned properly.

Environment One Product with quantity: Control Housing NC0037G01- quantity of 1 $58SS Discharge PD0296P04- quantity of 2 $50Pin, Lifting 3/8" NA0006P01- quantity of 8 $8Bolt, 5/16-18 x1.75 0073-7028- quantity of 1 $0.50Screw, Captive PA1134P01- quantity of 6 $3Connector, Cable PA1150P06- quantity of 1 $2Locknut, 5/16" 0719-3218SS- quantity of 150 $22.50Flat Washer, 5/16" 0707-7002- quantity of 14 $2

SMC AMG550C-N10D Water Separator, N.O. Auto Drain, 3,700 L/min, 1" NPT This AMG550C-N10D water separator is suitable for use in removing water vapor from air flow. The separator has 1" National Pipe Taper (NPT) female inlet and outlet ports for use with existing air piping and handles up to 3,700 L/min air flow rate during operation.

Specifications for this item

Foam chamber pipe, foam generators Clear pvc I.D. 1in Inlet 1/2in FNPT x outlet 1/2 FNPT Free shipping

This is a small water/chemical pump. It's 115 volt made by fasco for the Milton Roy Co. Harttell Div.

RETAIL PRICE: $1400-1800 Overview: Intuitive: Rotary dial and function key controls Clear: Highly visible LED temperature display Integrated: TC120 integrated pump for exte