inline pressure relief valve for sale, brand-new and used.

Store Policies - Payment | Returns | Shipping | Contact Us

Store Policies - Payment | Returns | Shipping | Contact Us

NEW - IN THE BOX PARKER HYDRUALIC SOLENOID OPERATED TRI-PRESSURE RELIEF VALVE 1/4" NPTF PORTS VOLTAGE= 120/60/1 - 110/50/1 SIGNAL LIGHTS RANGE=150-3000 PSI RANGE=150-1000 PSI SEALS=NITRILE MAX FLOW= 1 GPM MAX OPERATING PRESSURE= 3000 PSI INLINE MOUNTING (BOTTOM PORTED)

Paratech 22-890490 Inline Relief Valve This listing is for (1) unused unit with everything shown in pictures. Overstock unit with NO manufacturer's packagin

start_elivehelp_btncodeend_elivehelp_btncode

New, without packaging. Sealed in factory packaging. From old stock.

This Listing is for One (1) Circle Seal 5120 Inline Relief Valve 5120S-4MP-100

AMTROL ST-5 Thermal Expansion Tank

Amtrak invented the thermal expansion tank to control pressure build-up in closed, hot water systems. This prevents the water heater pressure relief valve from opening, saves energy and eliminates a potential safety hazard. All thermo-x-troll expansion tank.

Apollo 70-900 Series Bronze Ball Valve, Two Piece, 3-Port Diverting, Lever, 1" Solder End The Apollo 70-900 series bronze two-piece inline 3-port diverting ball valve has a lever handle and solder ends on all ends. The valve body is made of bronze for higher strength and corrosion resistance than brass. This valve has a zinc-plated steel lever handle with a vinyl sleeve for manual on/off control.

Apollo 71-500 Series Bronze Ball Valve, Two Piece, Inline, Spring-Close Lever, 1/2" NPT Female The Apollo 71-500 series two-piece inline ball valve is made of bronze and has a spring-close lever handle and female National Pipe Taper (NPT) threaded connections on both ends. This valve is made of bronze for higher strength and corrosion resistance than brass and has a stainless steel spring-close handle with a vinyl sleeve for manual on/off control.

Apollo 75-100 Series Bronze Ball Valve, Two Piece, Inline, Lockable Lever, 1" NPT Female The Apollo 75-100 series two-piece inline ball valve is made of bronze and has a lockable lever-handle and female National Pipe Taper (NPT) threaded connections on both ends. This valve is made of bronze for higher strength and corrosion resistance than brass.

The Apollo 70-100 series two-piece inline ball valve is made of bronze and has a tee-handle and female National Pipe Taper (NPT) threaded connections on both ends. This valve is made of bronze for higher strength and corrosion resistance than brass. Its zinc-plated steel tee-handle for manual on/off control has a compact design and resists accidental turning.

The Apollo 76F-100-A series two-piece full port inline ball valve is made of stainless steel and has a lever handle and female National Pipe Taper (NPT) threaded connections on both ends. This valve is made of stainless steel for resistance to corrosion and has a stainless steel lever handle with vinyl sleeve for manual on/off control.

The Apollo series 76-100 two-piece inline ball valve is made of stainless steel and has a lever handle and female National Pipe Taper (NPT) threaded connections on both ends. This valve is made of stainless steel for resistance to corrosion and has a stainless steel 304 lever handle with a vinyl sleeve for manual on/off control.

Apollo 71-500 Series Bronze Ball Valve, Two Piece, Inline, Spring-Close Lever, 1/2" NPT Female Connector Type: NPT Female | Item Length String: 2.25 inches | Number of Items: 1 | Part Number: 71-503-01 The Apollo 71-500 series two-piece inline ball valve is made of bronze and has a spring-close lever handle and female National Pipe Taper (NPT) threaded connections on both ends.