insert hand for sale, brand-new and used.

Browning 2VP71X1 5/8 2 groove sheave adjustable Returned sheave, 1 side will not hand adjust, you have to insert a pin and use a hammer, see picture. (the balance holes were a bit bunged up when returned. The oposite side adjusts fine Shipping will be added to your bid.

var itemNumber = window.ebayItemID ?

New Genuine 3 Position Turbine Gear for 6 Brush Hoover Steam Vacs Part # 43191018 subs to new Hoover # 440006173 (part is identical) 3 Position Turbine and Gear Assembly for 6 Brush Dual V Steam Vacs.

New Genuine Hoover Turbine & Gear Assembly for 5 Brush Steam Vacs Part # 43191021 This is the part that makes the brushes on the brush block spin. Replaces the following part numbers: 90001356, 43191008, and 43191021 Will fit most Hoover Steam Vacs that have 5 Brushes on the Brush Block. Does not fit the Dual V models.

New Genuine Hoover Turbine & Gear Assembly for 5 Brush Steam Vacs Part # 90001355 This is the part that makes the brushes on the brush block spin. Replaces part numbers9000

New Genuine Hoover Turbine & Gear Assembly for 5 Brush Steam Vacs Part # 90001354 or 43191019 This is the part that makes the brushes on the brush block spin. Replaces part numbers 90001354, 43191019, 43191001 The best way to discover whether this part needs to be replaced is to remove the brush block and insert a flat head screw driver into the small square hole that accepts the green drive pin from the brush block. Attempt to twist the screwdriver.

Genuine Hoover Turbine & Gear Assembly for 5 Brush Dual V Steam Vacs Part # 43191009 This is the part that makes the brushes on the brush block spin. Fits ALL Dual V, and V2 Steam Vacs with 5 Brushes on the Brush Block. Fits all model numbers beginning with F72__-___

New Genuine 2 Position Turbine Gear for 6 Brush Hoover Steam Vacs Part # 91001019 or 43191012 2 Position Turbine and Gear Assembly for 6 Brush Dual V Steam Vacs. Only fits models with 2 Positions (On/Off) for the brush speed settings. If your model has 3 Positions (2 On positions and 1 Off position) for the brush speeds, you need part # 43191018, which is also available in my store.

Genuine Hoover Turbine & Gear Assembly for 5 Brush Dual V Steam Vacs Part # 43191009 This is the part that makes the brushes on the brush block spin. Fits ALL Dual V, and V2 Steam Vacs with 5 Brushes on the Brush Block. Fits all model numbers beginning with F72__-___ The best way to discover whether this part needs to be replaced is to remove the brush block and insert a flat head screw driver into the small square hole that accepts the green drive pin from the brush block.

STA-LUBE HAND CLEANER DISPENSER ~NEW~ YOU ARE BIDDING ON A STA-LUBE HAND CLEANER DISPENSER ~NEW~ INCLUDES: CENTER DISPENSING INSERT FOLLOWER PLATE MOUNTING BASE MOUNTING HARDWARE USES A 6 1/2" TUB OF CLEANER GREY NEW 010862913 E-39 #11 Q-2 6/27/11 My Policies: Another auction from equipment parts sales

Features:

14U412 up for sale is a set of 5 special nylok head lock nuts used on the military HMMWV and other military equipment, this has a 1/2-20 thread inside.

This is a new, unused bag of 1,000 plastic anchor rivets from Micro Plastics Inc., with a mushroom style head. They measure .25 inches by 1.5 inches and are a very pale gray in color. (The rivet section is 1 1/2 inches, that is how deep the hole it is being put into has to be.

NEW Astro Pneumatic 1432A Industrial Hand Riveter Kit

Product DescriptionFatIvan Door Chock with MagnetModel# FI-1 The FatIvan® Door Chock is the World's Only Fold Up Door Chock. A perfect tool for Emergency Services, Commerical, Residential, Industrial, Hotel/Motel and all deliveries. FatIvan's® safe, secure design never slips off hinge or comes out accidentally.