insta lab for sale, brand-new and used.

This is a Chroma 62100H-600S High Performance DC Power Supply with Solar Simulation. Chroma's new 62000H Series of programmable DC Power Supplies offer many unique advantages for telecom, automated test system & integration, industrial, battery charge & simulation for hybrid cars and solar panel simulation.

This is a Keithley 2700 Data Acquisition Mainframe with an installed 7705 40-Channel Module. The Keithley 2700 is a cost-effective, high performance test platforms offer affordable alternatives to separate digital multimeters and switch systems, dataloggers/recorders, plug-in card data acquisition equipment, and VXI/PXI systems. The Integra Series plug-in switching and control modules offer unmatched flexibility and testing efficiency for a wide range of industries and applications.

This is a Kepco ABC10-10DM Digital Power Supply. This supply has a 0-10V, 0-10A, 100W Output range, and is GPIB Programmable. This unit has been fully checked in our lab and is guaranteed completely operational.

This is an Agilent 6012B DC Power Supply. This supply can output 0-60V, 0-50A, and up to 1200W Power. This unit has been fully checked in our lab and is guaranteed completely operational.

This is a Teledyne Lecroy SDA-813Zi Serial Data Analyzer. This is a 13Ghz, 4-Channel scope, with up to 40Gsa/S sampling rate. See pictures for options and processor and memory information.

This is a TDK Lambda GEN80-19 Programmable DC Power Supply w/IEEE.

This is an Agilent Keysight 11715A AM/FM Test Source. The Agilent 11715A AM/FM test source provides very flat, wide-bandwidth, and low-distortion amplitude - or frequency-modulated RF signals. Designed primarily for performance tests and adjustments of the Agilent 8901A/B modulation analyzer and Agilent 8902A measuring receiver, it will also serve as a high-quality modulated test oscillator where its frequency ranges apply.

This is an Agilent V85104A V-Band Millimeter Wave S-Parameter Test Set with the 85105A Controller. This is the main system components of an Agilent 85106D Banded Millimeter Wave Network Analyzer System. When paired with an 8510C and system sources, this give you full S-Parameter Measurement Capability in the 50-75Ghz V-Band in waveguide.

This is a Teledyne Lecroy SPARQ-4004E Signal Integrity Network Analyzer with the included accessory kit. A TDR/TDT-based analyzer that measures 40GHz, 4port S-parameters with a single button. Fully calibrated measurements can be made in minutes, and without any need to connect or disconnect cables to calibration kit standards or electronic calibration modules.

This is an HP 8508A Vector Voltmeter with an 85082A 300khz-2Ghz Input Module. The Agilent 8508A vector voltmeter is a fully automatic tuned receiver that makes RF voltage and phase measurements easy. Its narrowband measuring technique gives a dynamic range of over 90 dB and a sensitivity of 10 micro V to trace even the smallest signal.

This is an Agilent 70300A RF Tracking Generator for the 70K/MMS Series Spectrum Analyzers. An Agilent 70300A RF tracking generator adds stimulus-response measurements to an Agilent 70000 series spectrum analyzer, enabling accurate characterization of gain, frequency response, isolation, and return loss. The wide dynamic range makes accurate measurements of filter rejection and switch isolation without the need for time-consuming

This is an Agilent 70000 Series Spectrum Analyzer, fully configured and tested. This system has a frequency range of 100hz-26.5Ghz, and consists of the following system components: Agilent 70004A Color Display and Mainframe Agilent 70001A Mainframe Agilent 70900B Local Oscillator Agilent 70902A IF Module Agilent 70903A IF Module Agilent 70909A RF Section, 100hz-26.5Ghz, with external mixer capability Agilent 70310A Precision Timebase, with attached power

This is an Agilent 81104A Pulse/Pattern Generator with two 81105A Output cards installed. The Agilent 81104A 80 MHz Pulse Pattern Generator with one or two Agilent 81105A output modules (single-/dual-channel) builds on the performance of the 81101A and is backward-compatible. The 81104A extends the frequency range and adds RZ/NRZ pattern capability up to 16 kbit per channel.

This is an Agilent 11974A Preselected RF Section. The Agilent 11974A mixer is preselected from 26.5 to 40 GHz to eliminate the need for signal identification. Preselection reduces mixer overload from broadband signals and reduces the interaction of local oscillator harmonics with the device under test.

This is a Keysight 16089A Kelvin Clip Lead Set. The 16089A makes it possible to measure odd-shaped components that cannot be measured with conventional fixtures. It is equipped with two insulated Kelvin clips.

This is a Clarke Hess 2505 Multi-Function Gain Phase Analyzer. The Model 2505 is a multi-function instrument which is ideal for users that must make a large variety of sophisticated measurements. A single package, contains a Gain Phase Analyzer (Frequency Response Analyzer), Phase Angle Voltmeter with a null detector, Function Generator, Pulse Generator, Spectrum Analyzer, Digital Sampling Oscilloscope, Wattmeter, Phase Meter and Complex Impedance Bridge.

This is an Agilent Keysight E4980A Precision LCR Meter with option 002 Bias Current Interface. This unit has the following features: Frequency 20 Hz to 2 MHz, with 4-digit resolution in any range Basic accuracy 0.05% basic accuracy with superior measurement repeatability at low and high impedance More features High-speed measurements: 5.6 ms 201 points list sweep Versatile PC connectivity (LAN, USB and GPIB) The E4980A precisio

This is a Hakko 851 Hot Air Station. This unit is guaranteed operational. High bidder to pay $30 S&H if within the USA.

This is a Hakko 936 Soldering Station with a 907 Soldering Iron. A soldering iron stand is not provided. Features: Power Consumption: 110V 60W