internal hex screw for sale, brand-new and used.

New Sealed Nobelbiocare 15° Esthetic Abutment NobelReplace RP 1mm 32381 15° Esthetic Abutment NobelReplace RP 1mm 15° Esthetic Abutment NobelReplace RP 1mm Ease of use – Prefabricated titanium abutment available in a selection of angulations (straight and 15 degrees) and varying collar heights Restorative flexibility – For single- and multiple-unit restorations, including immediate temporization (optional temporary coping available for ab

SUN Hydraulics Standard Capacity Counterbalance Valve Model: CBIHLJN Technical Features: Counterbalance valves with pilot assist are meant to control an overrunning load. The check valve allows free flow from the directional valve (port 2) to the load (port 1) while a direct-acting, pilot-assisted relief valve controls flow from port 1 to port 2. Pilot assist at port 3 lowers the effective setting of the relief valve at a rate determined by the pilot ratio.

Panduit CS300 350 kcmil to 1 AWG Straight Tongue Terminal Lug - 3/8 Stud - 600 V - 300 A Brand new terminal lug Manufactured by Panduit Model: CS300 Accepts: 350 kcmil to 1 AWG conductors Rated: 600 V Current: 300 A Material: Copper For use with stranded copper conductors Internal pressure bar and V-bottom collar provide uniform clamping force on conductor Inspection window to assure full conductor insertion Plated steel hex head screw provides high strength

Lot 10 Pass and Seymour Duplex Receptacles 5862-W Pass & Seymour 5862-W Specification Grade Duplex Receptacle; Wall Mount, 250 Volt AC, 20 Amp, 2-Pole, 3-Wire, NEMA 6-20R, White Product Details • Dimension: 1.322 Inch Width x 0.780 Inch Depth x 3.281 Inch Height • Heavy-duty, brass strap for added strength and ground conductivity

Welcome to BE Quality Industrial. Most items are purchased from Nuclear Power Plants and all are of the absolute highest standards and quality. You are buying the best of the best for a fraction of the cost.

W2Q Pneumatic Heavy Duty Connector Crimping Tools Operation Guide(M22520/1-01,AWG12-26) CE Approval 1. Application and Feature * This pneumatic crimping tools to meet

ebay

MG Plus Barrel for RepRap 3D printer Extruder Hot End 1.75mm Filament. Check out our Ebay store for MG Plus Hotend MG barrels are 36mm long and available in two internal diameters: for 1.75mm and 3mm filament. MG barrels are not fully threaded, unlike Makergear barrels.

MG Plus Barrel for RepRap 3D printer Extruder Hot End 3mm Filament. Check out our Ebay store for MG Plus Hotend MG barrels are 36mm long and available in two internal diameters: for 1.75mm and 3mm filament. MG barrels are not fully threaded, unlike Makergear barrels.

Rotomax Rotating Nozzle. This is a General Pump Best Seller. Designed to improve the cleaning efficiency of any pressure washer by producing a rotating action that considerably expands the contact area of the cleaning stream and provides the impact of a zero degree nozzle at the same time.

Rotomax Rotating Nozzle. This is a General Pump Best Seller. Designed to improve the cleaning efficiency of any pressure washer by producing a rotating action that considerably expands the contact area of the cleaning stream and provides the impact of a zero degree nozzle at the same time.

You are bidding on 4 (four) Socket-head Cap Screw BoltsNon-Magnetic Stainless Steel (I have 3 more bags of 4 each, if you need more of them contact me BEFORE you bid, I could revise the listing)**This auction is for a total of 4 (FOUR) bolts, as shown in the picturesMy measurements: Overall length =

var itemNumber = window.ebayItemID ?

var itemNumber = window.ebayItemID ?

var itemNumber = window.ebayItemID ?

Thread direction: right-hand Internal drive style: d5 hexagon Nominal thread diameter: 0.375 inches Thread quantity per inch: 16 Hardness rating: 32.0 rockwell c minimum and 43.0 rockwell c maximum overall Shoulder shape: round first shoulder Surface treatment: cadmium and chromate overall Thread series designator: unc Thread class: 3a Thread length: 0.595 inches minimum and 0.625 inches maximum

Genuine U.S. Military Issue Surplus   Lot of 5 - Threaded Brass Pipe Bushings   We are not sure who manufactured this part, we came up with the following.... Allis Chalmers Corp.

Lithonia Lighting VR3C HID Luminaire Light 120V 50W Description

Offered are the tools and equipment left over from my EOD tools set, have reached that point where is it time to retire. Included are tools that are time and task proven, maybe a little rust on a couple, some are brand new - but you won't be disappointed. Several of the tool sets sell for $80's and more.