iso valves for sale, brand-new and used.

Please ask questions before you buy if you need more information . These are surplus items because of a customer pullout, from a large cryogenic tank mfg. We have put information below that we found online.

Rexroth valves directional valves H-4WEH10C46/6EG24N9DAL H4WEH10C4X6EG24N9DAL

REXROTH SANDWICH PROPORTIONAL PRESSURE CONTROL VALVE (ZDC 10 P-2X/M) Rexroth Meter-in pressure compensator, direct operated; ZDC 10 P-24/M Model: ZDC 10 P-24/M aka ZDC10P2XM MNR: R900488023 Valves of type ZDC are direct operated meter-in pressure compensators of 2- or 3-way design. They are used for load compensation as meter-in pressure compensator in channel P. – Sandwich plate valve

Auction is for One Unused Series 39 Pneumatic Actuator DESCRIPTION: The Worcester Series 39 Pneumatic Actuators High cycle pneumatic power for on-off or throttling control of rotary valves and dampers The Series 39 Pneumatic Actuator design is based on the opposed rack-and-pinion principle utilizing piston guide rods to guarantee part alignment. The fully supported guide rods minimize friction and wear between the pistons and the body bore.

Untitled Document Hoke Gyrolok® 3/8" Tube OD x 1/4" NPT Male Elbow 316 Stainless Steel Instrumentation Grade Manufacture Part No. 6LM4316 Swagelok Ref. SS-600-2-4 Need more at the lowest price on the internet?

This class 125 Apollo 161T series swing check valve is a y-pattern check valve, and can be installed in both horizontal and vertical line with upward flow. The valve body and seat are made of bronze for higher resistance to corrosion than brass, and are resistant to dezincification. It has female NPT threads for connecting to male threaded pipes, creating a tighter seal than straight threads.

The Apollo 72-100 series two piece inline high pressure ball valve is made of carbon steel and has a lever handle and female National Pipe Taper (NPT) threaded connections on both ends. This valve is made from carbon steel for greater strength and hardness than stainless steel and has a zinc phosphate coating for corrosion protection.

The Apollo 76F-100-A series two-piece full port inline ball valve is made of stainless steel and has a lever handle and female National Pipe Taper (NPT) threaded connections on both ends. This valve is made of stainless steel for resistance to corrosion and has a stainless steel lever handle with vinyl sleeve for manual on/off control.

This SMC stainless-steel NCM Series air cylinder has a round body, rear pivot mounting, and a double-acting return type for linear applications. The double-acting air cylinder (also called a pneumatic cylinder) uses airflow through two air ports on opposite ends of the cylinder barrel to push out and retract the piston rod to produce continued movement. The air cylinder has a stainless-steel body to help resist corrosion and scaling, and it comes with a single piston rod.

This SMC single-acting CJ2 Series air cylinder has a spring-extend return, basic-style mounting, and rubber cushioning to absorb kinetic energy and reduce noise during operation. The air cylinder (also called a pneumatic cylinder) has a stainless-steel compact body and single piston rod to help resist corrosion and scaling.