item extrusion for sale, brand-new and used.

PCIS IS PROUD TO OFFER 1- ZEUSE PTFE EXTRUDED NATURAL TUBE. THE DIMENSIONS ARE 7/8" OD X 1/16" WALL THICKNESS X 5' LONG.

CORE Elastomers manufactures thermoplastic vulcanizate (TPV) “rubber-like” plastic materials made with (epdm/pp) in extrusion and injection molding grades with no minimum order quantity. Contact us with your project through our website coretpo.com We offer similar grades to Santoprene listed below. Please contact us and let us know your specific grade.

ZYTEL 45A IS THE EXTRUSION GRADE OF ZYTEL 101 WHICH IS FOR INJECTION MOLDING. BOTH ARE THE SAME MATERIAL. ONE IS EXTRUDED AND THE OTHER IS MOLDED.

Santoprene 201-64 natural plastic pellets in original bags with lot certification. Santoprene® is a registered trademark of ExxonMobil Chemical Co. CORE Elastomers

local molding shop closed and we have the remaining inventory of injection molding/extrusion beads. light gray (almost white) full gaylord bin. Ships freight.

OK Color America General Purpose Purging Compund Fast Clean Purging Compound Fast Clean 10NCK Flush Grade 10NCK Recommended temperature is 400 Degrees F This purging Compund can be use for Injection and Extrusion machine. Carrier is Olefin Resin Olefin fiber is a synthetic fiber made from a polyolefin such as polypropylene or polyethylene Plastic Pellets 10 Lbs Free USPS priority shipping!! Visit My

I sold my business and I am going through my storage to clear out the extra stuff that I didn't sell. I have 350LBS of this material in sealed unopened bags. This material can be used in extrusion or injection molding.

SOLD IN A PACK OF 6(SIX) SHEETS ON A PALLET TIVAR 1000 NATURAL PLATE .375 X 48 X 96 IN.

About Me

3 pieces of 1.5" x 3" x 24" extruded aluminum track from 80/20. Good condition, used lightly for a display assembly but fully functional. Please see my other auctions of 80/20 bars

4 pieces of 1.5" x 3" x 29" extruded aluminum track from 80/20. Good condition, used lightly for a display assembly but fully functional. Please see my other auctions of 80/20 bars

2 pieces of 1.5" x 3" x 27" extruded aluminum track from 80/20. Good condition, used lightly for a display assembly but fully functional. Please see my other auctions of 80/20 bars

5 pieces of 1.5" x 3" x 21" extruded aluminum track from 80/20. Good condition, used lightly for a display assembly but fully functional. Please see my other auctions of 80/20 bars

3 pieces of 1.5" x 3" x 32" extruded aluminum track from 80/20. Good condition, used lightly for a display assembly but fully functional. Please see my other auctions of 80/20 bars

Four pieces of 1.5" x 3" x 32" extruded aluminum track from 80/20. Good condition, used lightly for a display assembly but fully functional. Please see my other auctions of 80/20 bars

18 pieces of 1.5" x 1.5" x 31" extruded aluminum track from 80/20. Good condition, used lightly for a display assembly but fully functional. Please see my other auctions of 80/20 bars

Six pieces of 1.5" x 1.5" x 29" extruded aluminum track from 80/20. Good condition, used lightly for a display assembly but fully functional. Please see my other auctions of 80/20 bars

T Slot Aluminum Extrusion 1010 , 10 x 10mm, 12" long T Slot Aluminum Extrusion 10 x 10mm (0.39" square) Center hole ?2,5mm (0.01" / can do M3 thread or similar) Slot can fit M2.5 round head bolts Length 305mm / 12" * Bolts, nuts, washers not included Other length and quantities on request! We ship from Hong Kong via airmail

Here is a lot of Extruded Aluminum in assorted sizes and pieces. The siz

A 6Al-4V titanium angle extrusion is offered for sale. The legs are not quite equal in length, but they are at least 2 5/8 inches. The angle was measured as 100 degrees and the thickness is 7/16 inches.