item gib for sale, brand-new and used.

You are buying five items.

I HAVE FOR SALE AN ORIGNAL ECONOMY OR HERCULES GAS ENGINE STARTING CRANK. THE PART # IS I77A. THIS IS FOR THE 1 1/2 AND 2 HP MODELS.

This is a very hard to find original cast iron starting crank for a Fairbanks Morse Dishpan Z hit and miss gas engine. It is in perfect condition with no cracks, breaks, or repairs of any kind. It has a 1 1/2 inch bore and would certainly work on any engine that it fits on but it came from the factory with a Fairbanks Morse Dishpan Z engine.

This is a very hard to find original cast iron starting crank for a Fuller Johnson hit and miss or gas engine. It is in perfect condition with no cracks, breaks, or repairs of any kind. It has a 1 5/16 bore and fits a 1 1/4 inch crankshaft and would certainly work on any engine that it fits on but it came from the factory with a Fuller Johnson engine.

This is a very hard to find original cast iron starting crank for an Associated or United hit and miss or throttle governed gas engine. It is in perfect condition with no cracks, breaks, or repairs of any kind. It fits a 1 5/8 inch crankshaft and would certainly work on any engine that it fits on but it came from the factory with an Associated or United engine.

This is a very hard to find original cast iron starting crank for a 1 1/2 or 2hp Hercules or Economy hit and miss or throttling governor gas engine. It is in perfect condition with no cracks, breaks, or repairs of any kind. It is part number 177F and fits on a 1 1/4 inch crankshaft and would certainly work on any engine that it fits on but it came from the factory with a Hercules and Economy engine.

This was removed from a working Hobart A200 mixer.

This was removed from a working Hobart A200 mixer.

ORIGINAL ATLAS 10/12 In. LATHE TOOL POST SLIDE & GIB PART No. 9-303, 9-304 The photos are accurate to each description and exact to what you will receive.

New York Supplies New York Supplies 10 mm Wrench / Spanner for Heidelberg SM 74 Plate Cylinder Clamp

This Is A FOURSLIDE NILSON LOT OF PARTS=== #S00 TOOL BLOCK, #S1 FEED SLIDE GIB, KINGPOST ADJUSTING PLATE AND SCREW., AND #S1 FEED GRIP PLATE.CARBIDE INSERTED. USED.. shipping is from 06010-ct usa.

New old stock Delta Table Saw Insert in original packaging. Gib screw adjustable 8 inch dado insert for the original right tilt Unisaw and 10" Contractor's Saw. There is a tiny tab on one edge.

DESCRIPTION: USED, NO NAME, NO ENGRAVINGS, MISSING GIB BAR (PIC5), MACHINIST RULE STAND. THE RULE HOLDER HEIGHT CAN BE ADJUSTED VIA A THUMB WHEEL ON THE BACK. LOOK AT THE PICTURES.

Gray 36" & Larger Double Housing Planer Operating Instructions Manual For models: 36" and Larger Description: This is an Operators Manual for the Gray 36" and Larger Planer. It has sections on: Operation, Lubrication, Adjustments, Set up operations, Clutch Adjustments, and much more. The manual has 39 pages.

New Wash-up Blade for New Wash-up Blade for Heidelberg SM-102 11 Hole Design Part#: HE-SM102-WB(1

New York Supplies New York Supplies Washup Blade for Heidelberg KORD 62 Part #

Metaltech, Pull Stud, BT40, 45 degrees, Thread M16, Length 60mm, Shaf 10mm, New var numImgsLoaded = 0; function autoSizeImageForSlides

New York Supplies New York Supplies Safe Bolt / Shear Bolt for Polar Cutter 82 EL, 82 CE, 86 EL, 86 CE, 90 EL, 90 CE, 92 CS, 92 EL, 92 EMC & 92 CE

New York Supplies New York Supplies Safe Bolt / Shear Bolt for Polar Cutter 92

New York Supplies New York Supplies Safe Bolt / Shear Bolt for Polar Cutter 137