j nut for sale, brand-new and used.

THIS AUCTION IS FOR A NEW OLD STOCK KITAGAWA 8" BB08 CNC LATHE SUPER LARGE BORE POWER CHUCK with A2-6 MOUNT. 2.600 THRU HOLE. 5.250 BOLT CIRCLE (6 bolts x M12) MASTER JAW SERRATION 1.5mm x 60° JAW T NUT SIZE (top .551 x bottom .855) DRAW TUBE SIZE 74MM X 2.0MM THREAD I bought several crates of surplus tooling from a machine shop.

JW Winco J.W. Winco "Mighty Mount" 6T3FA1 Series MM100 Steel Heavy Duty Threaded Stud Type Vibration Mount, Yellow Powder-Coated Finish, Inch Size, 3/8-16 Thread Size, 100/300lbs Load Capacity Range

Is your Delta Unisaw Jet-Lock fence not "locking" the rear clamp like it should? It could be due to a damaged lever in the rear clamp casting. This part is an exact replacement for the original equipment cam lever that is located inside the casting at the rear of the rip fence.

J little Mercer co. Sparkler 8-3 stainless steel three plates with two screens 1/4" top inlet 3/8" top center inlet 3/4" bottom center outlet 3/8" side outlet 1/4" side outlet vessel measures 8.5" dia x 5" deep overall 14" x 12" x 12" missing one top nut, otherwise looks useable although this item has no mfg plate, it

(1) INTERNAL PIPE CLAMP TOOL, STEEL, 1" OD COMPRESSION CLAMP, COLLET MACHINIST TOOL Used and in very good condition, some scratch marks; works great. Steel Internal Pipe Clamp Tool, 1" OD, Machinist Tool Collet. This sale is for one (1) internal pipe clamp tool.

(ALL POTS I SELL, NEW OR USED, ARE TESTED GOOD AND GUARANTEED) THIS ITEM IS FOR 1 (one): ALLEN-BRADLEY TYPE J LONG SHAFT, DUAL WITH TAP 1K OHM (1,000 - 1,000) DUAL WITH TAP 2 WATT POTENTIOMETER MARKED: JD1N200P102CA LINEAR TAPER, WITH 50% CENTER TAP DIM: 1 1/8" DIA X 1 1/4" BEHIND PANEL VOLTAGE: 500

4mm Label Semi-Automatic Sheet Embosser Metal Stamping Printer Marking Machine Description:

(ALL POTS I SELL, NEW OR USED, ARE TESTED GOOD AND GUARANTEED) THIS ITEM IS FOR 1 (one): ALLEN-BRADLEY TYPE J LONG SHAFT 50K (50,000) OHM 2 WATT POTENTIOMETER LOG (AUDIO) TAPER DIM: 1 1/8" DIA X 9/16" BEHIND PANEL VOLTAGE: 500 RMS SHAFT: 1/4" W/SLOT X 1 1/2" LONG

New Allen Bradley Dual Potentiometer, 50K ohm, 2 watt Part number: JD1N200P503UA See below for part number decode. Sale is for one (1) new potentiometer. No other parts included in sale.

New Ohmite 1.5K ohm Potentiometer CU1521 10% tolerance Sale is for one (1) new potentiometer. No other parts included in sale. See photos for details about this part.

Up for bid is a USED Stanley nut runner cable. This cable is 10 feet long and in good condition. The part number on the tag is X5419/3 Rev J 1071 4011.

(ALL POTS I SELL, NEW OR USED, ARE TESTED GOOD AND GUARANTEED) THIS ITEM IS FOR 1 (ONE): ALLEN-BRADLEY POTENTIOMETER WITH BUILT-IN SWITCH TYPE J, 2 WATT VALUE: 5K (5,000) OHM LOG TAPER, PANEL MOUNT SWITCH: DOUBLE POLE - 1 POLE ON, 1 POLE OFF. This switch has a broken solder lug (shown in last picture) but it can be soldered to. RATED: 3A - 125 VAC, 1A - 250 VAC

ACR SRP-006-128K 01-0122 Smartreader Plus 6 Datalogger, Smart Reader Data Logger, 128Kb This listing is for a data logger. Manufacturer: ACR Systems Model / Part #: SRP-006-128K Description: SmartReader Plus 6 8-CHANNEL TEMPERATURE DATA LOGGER - Monitor temperature over a wide range with the SmartReader Plus 6 data logger. Easily and accurately record temperature from any J, K, S, T or E type thermocouple probe.

ACR SRP-005-128K 01-0121 Smartreader Plus 5 Datalogger, Smart Reader Data Logger, 128Kb This listing is for a data logger. Manufacturer: ACR Systems Model / Part #: SRP-005-128K Description: SmartReader Plus 5 3-CHANNEL TEMPERATURE DATA LOGGER - The SmartReader Plus 5 data logger is ideal for those applications that require monitoring extremely high temperatures or monitoring temperature over a wide range.

Ridgid Model 4P-J Receding Pipe Threader, 2-1/2" to 4" Size Range, Dies Not Included Description Ridgid 4P Receding Pipe Threaders The Ridgid 4P is the predecessor to the 141. This is an obsolete model, which can be found at a deep discount. The main difference between the 4P and 141 is that the 4P uses one set of dies for each size.

Shower drain retainer nut wrench For: Brass and black and white, 3 1/2 inch wide, Hex nut drains 3/8 in. Drive A36 Steel, 3/16 in. thick Thin so you can get through the small hole in sub flooring.

ERICKSON Collet Chuck Collet System ER Collet Series ER16 Shank Type

Collis Tool adapter Item # 70834 Specifications Extension Size 2 in. Adapter Size (A) 1 in. Morse Taper Hole (B) 1 Shank Length (C) 6 5/8 in.