j type thermocouple for sale, brand-new and used.

New Universal Digital PID Temperature Controller with SSR Output and 2 Alarms

Dual Digital F/C PID Temperature Control Controller TA4-SSR With 2 Alarms Display: Dual display for Fahrenheit(F) and Celsius??C) Range: -1999 to 9999 (depends on the thermocouple) Relay Output: Mechanical (3A) and SSR. Accuracy: 0.3% Thermo Resistor: PT100, Cu50 Thermocouple Support: K,J,E,S,T,B,R Product Description Dual display universal digital programmable temperature controller that supports many type of thermocouple sensor. It can be powered by 90-260V AC/DC , Comsumption5VA.

New/ Unused open stock item. Type J thermocouple with Dual Output 48" length of Superflex conduit/casing Adjustable immersion Dual Type J standard Male plug This is a dual thermocouple and has dual outputs to a 4-pin double male standard thermocouple plug. The measured temperature can be sent to two separate control or readout systems for comparison, alarms,etc

Accu Therm model AT48 Temperature Controller. Range 0-200F 110V / 220V input Requires J type thermocouple.

CASEY ELECTRIC SUPPLY FASTHEAT Cartridge Heater P/N: CHx13515 &nbs

Chromalox 3390 Multi-Loop Temp. Process Controller New

Thermocouple, type J stainless steel braid with a twist latch for the head.  Cable appears to be around 3 feet long.

This listing is for two Eurotherm 808 temperature controllers. They were purchased for a job, mounted inside a panel and then never installed at the job site. They were originally set up for 10 to 50 mV input and 0 to 100 % display.

Omega HH-20-CAL Thermometer Calibrator Type J-K-T Thermocouple This calibrator has been sitting in a garage

This listing is for a Extech Thermocouple Simulator Type J, New in Packaging, W Case, Instructions. What you will get: Extech Thermocouple Simulator Type J, New in Packaging, W Case, Instructions. Description: A New Extech Thermocouple Simulator Type J, New in Packaging, W Case, Instructions

The UNI-T UT713 Handheld Thermocouple Calibrator is a precision tool for measuring and calibrating thermocouples. The UNI-T UT713 Thermocouple Calibrator can be used for output and measurement of DC voltage and 8 different types of thermocouples. The calibrator is a high accuracy calibration and measurement instrument with an easy to hold shape and large LCD display.

Altek Temperature Calibrator thermocouple type J Used but in good condition.Fully functional. Checked.It not include accessories or batteries. Fluke calibrator not included.

Thermocouple Calibrator is a precise source and measurement tool for calibrating thermocouple instruments through a thermocouple mini jack. The calibrator can be indicated in units of °C, °F , or mV. • Measure temperature from TC output • Simulate TC output • Operable with eight types of thermocouples • Calibrate linear TC transmitter with mV source function • Selectab

FEATURES The Multifunction Process Calibrator is a powerful, yet easy-to-use field calibrator. Use the measure and source functions to test and calibrate almost any process parameter.

FEATURES The Multifunction Process Calibrator is a powerful, yet easy-to-use field calibrator. Use the measure and source functions to test and calibrate almost any process parameter. Loop Power Voltage: 24V Accuracy: 10% Maximum Current: 24 mA, Short-circuit protection In addition to the functions listed in Table 1,the calibrator also has the following characteristics: 1.A split-screen display.

The Thermocouple Calibrator is a precise source and measurement tool for calibrating thermocouple instruments. The calibrator sources or measures in units of&

Features: 4-20mA, 0-20mA, 0-24mA with 1 m A resolution 0-100mV with 10 m V resol3ution 0-12V with 1mV resolution Thermocouple K,J,E,T TYPE 1 o C 1 o F resolution Frequency 2 - 50,000Hz

NEW DIGITAL PROCESS CALIBRATOR THERMOCOUPLE THERMOCOUPLE J\K\T\E\R\S\B\N VA710

OMEGA THERMOCOUPLE LOT OF 5 EA TYPE J VERY NICE Sold as is. Thanks.