US $719.14
Directions
Similar products from BT Tool Holders
Jacobs Chuck 0065368 ISO 529/2283 Clutch Tap Collet 3 Tap M27 20.0mm 16.0mm
Jacobs Chuck 0085145 BT 50 Shell Face Mill Tool Holder 27mm Dia 100mm Proj
Jacobs Chuck 0083549 CAT V 50 End Mill Tool Holder 1/4" Diameter 4" Projection
Jacobs Chuck 0065180 ANSI TAP Clutch Collet 2 5/16" Cap A 1/3" 1/4" Drive Square
Jacobs Chuck 0065166 ISO 529/ 2283 Clutch Tap Collet 2, M16 12.5mm 10.0mm Drive
Jacobs 0080614 BT 30 ER 32 Tool Holder with 100mm Projection
Jacobs Chuck 0080513 JCNT 30 ER 25 Tool Holder 55mm Projection 1/2" W12
Jacobs Chuck 0085122 BT 50 Shell Face Mill Tool Holder 2" Diameter 3" Projection
Jacobs Chuck 0080281-01 1-1/4-Inch Milling Chuck Collet with 8mm Diameter
Jacobs Chuck 0065491 ANSI TAP Rigid Collet System 1 12 Capacity, 2/9" 1/6" Drive
Jacobs Chuck 0065183 ANSI TAP Clutch Collet 2 1/2" Capacity 3/8" 2/7" Drive
Jacobs Chuck 0085226 CAT V 50 Shell Face Mill Tool Holder 2" Dia 4" Projection
Jacobs Chuck 0085115 BT 50 Shell Face Mill Tool Holder 1 1/4" Diameter with 6"
Jacobs Chuck 0064001 VDI 20 Hold In One Tool Holder with 0 to 8mm Capacity
Jacobs Chuck 0083551 CAT V 50 End Mill Tool Holder 3/8" Dia 4" Projection
Jacobs 83611 HSK 100A 20mm Diameter End Mill Tool Holder with 100mm Projection
Jacobs 0083525 BT 50 End Mill Tool Holder 10MM 63MM Pre-Balanced To 15KRPM
Jacobs 0065229 DIN 371 Type Tapping Collet 1 M5 6.0 MM 4.0 MM Drive Square
Jacobs Chuck 0065258 DIN 376 Clutch Tapping Collet 1 T M14 11.0mm 9.0mm Drive
People who viewed this item also vieved
Kennametal, CAT 50 End Mill Holder 1-1/2" Marked CV50 EM150800
NIKKEN CAT40 1-1/4" DIA ENDMILL HOLDER MORE LISTED CAT 40 END MILL LOT C11483
3/4" Shank Boring Bar marked SI-SCLCR-12-3 And 6-1/4" Long. Used
Iscar DGFH 26-2 Do Grip DGN style cut off holder removal tool parting CNC lathe
Iscar DGFH 26-3 Do Grip DGN style cut off holder removal tool parting CNC lathe
UTD 3.0" x 5/8" x 1.25" HSS Slot Mill
Niagara 4.0" x 1/2" x 1.25" HSS Slot Mill
BROWNING P1 x 1 3/8" SPLIT TAPER BUSHING
Martin E 2-7/16 E x 2-7/16" NIB Made In USA = ) Fast Shipping = )
MAZAK MULTIPLEX VDI 50 CUT-OFF / PARTING BLADE TOOL HOLDER
USED TENSION ONLY "L" SERIES TAP CHUCK with 1.00" SHANK
PALMGREN 96-80515 3/8' DRILL CHUCK with SHANK
ALBRECHT Wrench-Lock V-Flange Drill Chuck With Integral Shank 1/32''-1/2''
Iscar 2300728 Tool Block for Conventional & CNC Machines - Overall Length: 3.00'
Iscar 2300753 Tool Block for Conventional & CNC Machines - Overall Length: 3.40'
SUNNEN HONING MANDREL K16 .526AS HONING MANDREL K16-526AS
Heald Red Head ID Spindle SN. 84090, Inv 2841
40 TAPER Cartridge Spinde for RAMBAUDI TRACER MILL (SHORT SPINDLE)
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.
Accept All Cookies