US $40.00
| Condition: |
Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully
operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections.
...
|
Manufacturer | Kennametal |
| Country of Manufacture | Japan |
Directions
Similar products from BT Tool Holders
Jacobs Chuck 0065180 ANSI TAP Clutch Collet 2 5/16" Cap A 1/3" 1/4" Drive Square
Jacobs Chuck 0065166 ISO 529/ 2283 Clutch Tap Collet 2, M16 12.5mm 10.0mm Drive
Jacobs 0080614 BT 30 ER 32 Tool Holder with 100mm Projection
Jacobs Chuck 0080513 JCNT 30 ER 25 Tool Holder 55mm Projection 1/2" W12
Jacobs Chuck 0085122 BT 50 Shell Face Mill Tool Holder 2" Diameter 3" Projection
Jacobs Chuck 0080281-01 1-1/4-Inch Milling Chuck Collet with 8mm Diameter
Jacobs Chuck 0065491 ANSI TAP Rigid Collet System 1 12 Capacity, 2/9" 1/6" Drive
Jacobs Chuck 0066321 BT 50 Tension Compression Holder Size M14 - M36 251.8mm
Jacobs Chuck 0065183 ANSI TAP Clutch Collet 2 1/2" Capacity 3/8" 2/7" Drive
Jacobs Chuck 0085226 CAT V 50 Shell Face Mill Tool Holder 2" Dia 4" Projection
Jacobs Chuck 0085115 BT 50 Shell Face Mill Tool Holder 1 1/4" Diameter with 6"
Jacobs Chuck 0064001 VDI 20 Hold In One Tool Holder with 0 to 8mm Capacity
Jacobs Chuck 0083551 CAT V 50 End Mill Tool Holder 3/8" Dia 4" Projection
Jacobs 83611 HSK 100A 20mm Diameter End Mill Tool Holder with 100mm Projection
Jacobs 0083525 BT 50 End Mill Tool Holder 10MM 63MM Pre-Balanced To 15KRPM
Jacobs 0065229 DIN 371 Type Tapping Collet 1 M5 6.0 MM 4.0 MM Drive Square
Jacobs Chuck 0065258 DIN 376 Clutch Tapping Collet 1 T M14 11.0mm 9.0mm Drive
Jacobs Chuck 0080226 BT 50 Milling Chuck 42mm Diameter w/ 135mm Projection
Jacobs Chuck 0065170 ISO 529/ 2283 Clutch Tap Collet 2 M20 14.0mm 11.2mm Drive
Jacobs Chuck 0065286 ISO 529/2283 Clutch Type Tapping Collet 1 M14 11.2mm 9.0mm
People who viewed this item also vieved
KENNAMETAL CAT40 3/4" DIA ENDMILL HOLDER MORE LISTED CAT 40 END MILL LOT C11487
HIGH PRECISION LYNDEX CAT40 WITH INTEGRAL KEYLESS DRILL CHUCK CAT 40 LOT C11849
Kennametal Grovig, Threading, Boring Bar With 1" Shank And 5" Long. Used
Kennametal 1" Shank Boring Bar marked S16-KTLPR3 And 9-3/4" Long. Used
KENNAMETAL DCLNR-204D INDEXABLE TOOL HOLDER GOOD CONDITION 1 1/4" SQUARE
KENNAMETAL DCMNN-866E INDEXABLE TOOL HOLDER GOOD CONDITION 1" X 1 1/2"
Lyndex Hydraulic HSK63A End Mill Holder HDC07-120
(2) KEARNEY & TRECKER NMTB 50 TAPER SHANK #4 MORSE / #9 B&S ADAPTERS 4MT NMTB50
3/4" OD CNC LATHE BUSHINGS TYPE C SET OF 3
MACHINIST TOOLS LATHE MILL NICE Drill Bushing Lot
new sandvik insert cutoff blade
Doall Lectric centers grinding fixture
JACOBS Hi Torque/Precision Keyless Chucks Int. Shank cap. 0.039'' 0.512'' MT4
JACOBS Hi Torque/Precision Keyless Chucks Int. Shank cap. 0.039'' 0.512'' R8
Iscar 2300765 Tool Block for Conventional & CNC Machines - Overall Length: 4.33'
Iscar 2300762 Tool Block for Conventional & CNC Machines - Overall Length: 4.33'
SUNNEN MODEL AN STANDARD CYLINDER HONE
Heald Red Head ID Spindle SN. 84090, Inv 2841
40 TAPER Cartridge Spinde for RAMBAUDI TRACER MILL (SHORT SPINDLE)
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.
Accept All Cookies