JDSU Acterna HST-3000C Tester w/ CUADSL2-TX ANX A E1 / Datacom & Ethernet, US $2,995.00 – Picture 0

JDSU Acterna HST-3000C Tester w/ CUADSL2-TX ANX A E1 / Datacom & Ethernet, US $2,995.00 – Picture 1

JDSU Acterna HST-3000C Tester w/ CUADSL2-TX ANX A E1 / Datacom & Ethernet, US $2,995.00 – Picture 2

JDSU Acterna HST-3000C Tester w/ CUADSL2-TX ANX A E1 / Datacom & Ethernet, US $2,995.00 – Picture 3

JDSU Acterna HST-3000C Tester w/ CUADSL2-TX ANX A E1 / Datacom & Ethernet, US $2,995.00 – Picture 4

JDSU Acterna HST-3000C Tester w/ CUADSL2-TX ANX A E1 / Datacom & Ethernet, US $2,995.00 – Picture 5

JDSU Acterna HST-3000C Tester w/ CUADSL2-TX ANX A E1 / Datacom & Ethernet, US $2,995.00 – Picture 6

JDSU Acterna HST-3000C Tester w/ CUADSL2-TX ANX A E1 / Datacom & Ethernet, US $2,995.00 – Picture 7

Jdsu Acterna Hst-3000c Tester W/ Cuadsl2-tx Anx A E1 / Datacom & Ethernet

US $2,995.00

Toledo, Ohio, United States
Jan 29th

Open on mobile:
QR code

Content on this page requires a newer version of Adobe Flash Player. The Following Items Are Included: JDSU HST-3000C HandHeld Consumer Services Tester (BC# 18652) w/ Option: IP Suite Resistive Fault Locator Time Domain Reflectometer VT100 Emulation Wide-Band TIMS JDSU HST-3000 SIM CUADSL2-TX ANX A Module (BC# 18772) JDSU HST-3000 SIM E1/Datacom Module (BC# 12339) JDSU HST-3000 SIM Ethernet Module (BC# 13236) Test Leads Set JDSU JSH-4254DB3-HP Transceiver (BC# 10459) JDSU JSH-4254DB3-HP Transceiver (BC# 10456) (2) Ethernet Cables (2) MM LC-LC Duplex Fiber Cables (3) International Adapters AC Adapter/Charger User Manual On CD-ROM Carrying Case (G) BE SURE TO CHECK OUR EBAY STORE FOR OTHER ITEMS! This Item Has A Current Calibration! JDSU Acterna HST-3000C HandHeld Consumer Services Tester Installed Options: - IP Suite - Resistive Fault Locator - Time Domain Reflectometer - VT100 Emulation - Wide-Band TIMS INCLUDED MODULES: - HST-3000 SIM CUADSL2-TX ANX A Module (Copper, ADSL, & ADSL2 Testing For Annex A) - JDSU HST-3000 SIM E1/Datacom (Datacom & E1 Circuit Tesing) - JDSU HST-3000 SIM Ethernet (Optical 10/100/1000 Network Testing) Includes Carrying Case & Accessories As Listed Above! Working Condition: Excellent Condition: Refurbished Calibrated: Yes Warranty: 90 Day Exchange Warranty Acterna HST-3000 Handheld Consumer Services Tester Improving the installation, maintenance and troubleshooting of DSL services With a market primed for broadband, operators are rapidly deploying DSL in their networks to deliver multimedia services over the existing copper wire in the local loop. Traditionally, one set of technicians performed individualized tests that qualified the copper while another set conducted DSL services testing and verification. In today’s market, however, operators can no longer afford the time, capital expense, and labor costs to conduct tests separately and incrementally. Furthermore, test solutions must generate results that have a strategic impact throughout an operator’s entire organization. This may include building customer loyalty by locating and fixing problems quickly, improving profitability by performing more tests with less staff, or leveraging workforce productivity by automating processes, methods, and procedures. The Acterna HST-3000 is a modular handheld tester that can be built to order, to test the copper, test the DSL service and improve the process. Technicians use the HST-3000 copper base instrumentand the copper service interface module (SIM) to qualify, maintain, and troubleshoot the local loop. This same base instrument, with a second SIM that tests both ADSL and the copper, enables one technician to perform tests thatwere previously conducted by two technicians using different equipment. For those technicians who only need to test ADSL, the instrument can be configured for ADSL functionality only. Any HST-3000 module equipped to perform ADSL service tests can also verify ISP and Internet connectivity with the Acterna Advanced IP Suite software option. With the HST-3000 minimize the time and reduce the capital expense and labor cost associated with ADSL and copper testing. Highlights A combined tester for Copper and DSL testing Lower repeat rates with automated close out tests, scripting/pass-fail tests, and back office integration Modular hardware and software architecture is flexible and easily upgraded Laptop/PC integration via RS-232, USB, or wireless for easy results transfer Intuitive, easy-to-use GUI, lightweight, rugged and water resistant Instrument Interface Specifications Dual TIP/RING and Ground POTS/Copper: Color-coded, shrouded 2mm “mini-banana” jacks ADSL: 8-pin modular 10/100 BT Ethernet jack: 8-pin modular Serial port: DB9 female via cable (DCE) USB Host USB Device Bluetooth short-range wireless ADSL Standards ANSI T1.413 ITU G.992. 1 Annex A ADSL over POTS (G.DMT) G.992.2 (G.Lite) Cisco CAP General Specifications Ruggedness: Survives 3-ft drop to concrete on all sides Water-resistance: Splash proof: may be used in heavy rain Language: English Keypad: Typical 12-button keyboard Physical Specifications Size (H x W x D): 9.5 x 4.5 x 2.75 in Weight: 2.7 lb with battery Operating temperature: 22°F to 122°F Storage temperature: –40°F to 150°F Battery life: 10 hrs. typical usage Charging time: 7 hours from full discharge to full charge Operating humidity: 10% to 80% relative humidity Storage humidity: 10% to 95% relative humidity Display: 1/4 VGA monochrome transflective, 3.8-in diagonal (readable in direct sunlight) SIM CUADSL2-TX ANX A Module The HST’s copper testing features allow quick turn-up and troubleshooting of the services provided over copper. This includes testing with DVOM, opens, power (Mains) influence (PI), noise, balance, time domain reflectometer (TDR), resistive fault locate (RFL), load coil detect, loss, wideband transmission impairment measurement set (WBTIMS), caller ID, and POTS dialer. The HST provides process customization through on-board auto tests and allows workflow improvements via connectivity to craft access terminals and back-office systems. The copper testing features include the following: Measuring AC and DC voltage, current, and resistance Measuring to opens (length of cable) Measuring balance, noise, and power (Mains) influence (PI) Locating cable faults with the TDR or RFL Detecting load coils Measuring loop loss (voiceband) including receiving and sending tones; transmission impairment testing (noise, SNR, return loss) Voice service and caller ID (CLID) testing WBTIMS and WB2 TIMS testing including sending/ receiving tones; measuring wideband, impulse, and spectral noise; and transmission impairment testing (noise, SNR, return loss, crosstalk) Automatic testing using scripts, including POTS close out, good pair check, and wideband auto tests. ADSL is designed to carry a digital signal, over a copper pair, above the voice frequency band (20 KHz–1.1 MHz) to enable high speed internet service over a standard POTS line. This allows “always on” internet access while simultaneously providing voice service. Typical POTS line quality will normally support ADSL, but the DSL service must be tested when trouble strikes. To troubleshoot DSL service, a modem emulation test set, such as the HST-3000, is needed. The DSLAM and network configuration is verified by connecting at the main distribution frame (MDF) where known interference and attenuation are minimal, as shown in Figure 1. The physical (ADSL) layer data rates and noise margins are reviewed to confirm that they match the service contract. Validate correct DSLAM and BRAS provisioning by connecting to the customer line and authenticating with the network through the DSLAM. E1/Datacom Service Interface Module (SIM) •Datacom (X.21, V.24 (RS-232), V.35, V.36 (RS-449), EIA-530) •G.703: 2 Mbit/s Testing • 2 RX/2 TX: E1 Interfaces • Bulk, n x 64 kbit/s BERT •G.821, G.826, M.2100 • Audio Monitor • Signal Level and Frequency • Round Trip Delay • Event Log and Histograms • Pulse Shape • Frame Relay The JDSU HST-3000 E1/Datacom Service Interface Module (SIM) delivers the full functionality required for technicians tasked with ensuring and delivering high quality of service (QoS) for E1/Datacom. Part of a comprehensive catalog of modules for the HST-3000 platform, the E1/Datacom SIM provides the complete range of installation, maintenance, and troubleshooting features needed for E1/ Datacom circuits and network elements. 10/100/1000 Ethernet Service Interface Module (SIM) Supports Electrical and Optical Ethernet testing in a single module Performs traffic generation up to interface line rate and supports automated RFC2544 at Layers 2 to 4 (Eth/IP/TCP/UDP) Layer 2/3/4 multiple streams option facilitates Class of Service testing New J-Proof testing generates and analyzes a wide variety of control plane messages to verify proper switching and routing through transparent Ethernet networks Enables Ethernet OAM, PBB/PBT, MPLS, VLAN, QinQ, and IP testing IPv6 option enables installation and troubleshooting of IPv6 networks Dual-port ‘Thru Mode’ configuration enables live traffic analysis PPPoE protocol support for emulation of data traffic in the last mile Simplified user interface facilitates ease-of-use and minimizes technicians’ learning curves Supports VoIP and IP Video testing IPv6 features an auto-configuration facility, defined in RFC2461, which greatly simplifies address configuration. In “stateless” mode, an IPv6 host will automatically configure itself with a unique link-local address, which enables it to communicate locally on its own subnet. For communication over the Internet, the local router provides the host with a global address. Both transactions are completely transparent to the user, resulting in a truly plug-and-play environment. IPv6 also supports manual address configuration and DHCPv6 using a “stateful” address configuration when network administrators require tighter control over IP address allocation. The IPv6 option on the HST-3000 Ethernet SIM supports all three configuration schemes for IPv6 traffic testing for 10/100/GigE networks. The IPv6 option also features Monitor/Thru mode testing in which the HST-3000 gathers and analyzes live IPv4 and IPv6 traffic. Please check our Huge Inventory with savings of up to 80% off of retail on Cat5/5e/6 LAN Cable Certifiers and Fiber Optic OTDR's, Fusion Splicers, CATV Meters, Fiber Optic Kits, Sources, Meters, Tools, Network Analyzers and much more. Here is a Link to our Ebay Test Equipment Store. All of our Test Equipment is backed with a Full Warranty and unbeatable customer support & service. Please don't hesitate to contact us for a Quote on Something you don't see in our inventory, sometimes we have items that may have not been listed or processed yet. Test Equipment Store Offers a wide range of Refurbished Telecom/ Datacom Tools and Test Measurement Equipment. Which includes Fiber Optic Test and Splicing tools, Fusion Splicers, OTDRs, Copper and Fiber Cable Certifiers, CATV Test Equipment, Cable and Antenna Analyzers, Network Analyzers and much more! We carry a large inventory of quality refurbished and used test equipment from all the major manufacturers. If you are looking for multiple quantities or if we don't have a listing for a particular item that you are looking for. Please contact us as it may be fresh inventory waiting to be listed or we'll be glad to find it for you at the best price possible and put up an eBay listing for you! Contact: Test Equipment Store eBay Sales Phone: 1-419-517-6681 Toll Free : 1-800-548-2381 We Ship World Wide! We will attempt to ship your item(s) within 24 hours after payment has been received. To get a real-time shipping quote to your destination, enter your country and zip / postal code information into the shipping calculator and click "Get Rate". Many countries impose their own customs, duties, tariffs, taxes, etc. on items being shipped from a foreign country. We do not cover those cost's and we recommend that you contact your countries customs agency for that information. We Offer Multiple Quantity Price & Shipping Discounts, Email Us If You Are Interested In Larger Quantities. UPS Ground United States USD 0.00 USPS Express Mail International (EMS) Worldwide USD 0.00 We accept credit card payment transactions via the online checkout system! The checkout process is designed so that it communicates with the merchant to confirm that payment has been made and cleared. Other methods of payment are outlined through the online checkout process. Winning bidders must contact us within 3 days after auction close if special payment arrangements are needed. Your payment is expected within 5 days after the auction close. Unpaid auctions will be forfeited after 5 days of the auction close and the Item(s) will be relisted for sale. Items will be shipped within 24 hours (1 Business Day) upon receipt of payment from the winning bidder. (Certain orders may take longer for processing due to comprehensive final service inspections) A Shipment Tracking number(s) will be provided to inform Buyers of their expected ETA (Estimated Time of Arrival). Tracking number(s) will be provided the same day as order shipment. Thank you ALL MAJOR CREDIT CARDS & PayPal ACCEPTED Powers Your Online Marketplace Make order management a breeze with Kyozou eBay Order Management Software

Condition:	Seller refurbished: An item that has been restored to working order by the eBay seller or a third party not approved by the manufacturer. This means the item has been inspected, cleaned, and repaired to full working order and is in excellent condition. This item may or may not be in original packaging. See the seller’s listing for full details. ...	Model	HST-3000C
Manufacturer	JDSU