JDSU HST-3000C Tester w/ HST-3000 CU/DDS-LL T1 / CU & CUADSL2-TX ANX A Modules, US $2,695.00 – Picture 0

JDSU HST-3000C Tester w/ HST-3000 CU/DDS-LL T1 / CU & CUADSL2-TX ANX A Modules, US $2,695.00 – Picture 1

JDSU HST-3000C Tester w/ HST-3000 CU/DDS-LL T1 / CU & CUADSL2-TX ANX A Modules, US $2,695.00 – Picture 2

JDSU HST-3000C Tester w/ HST-3000 CU/DDS-LL T1 / CU & CUADSL2-TX ANX A Modules, US $2,695.00 – Picture 3

JDSU HST-3000C Tester w/ HST-3000 CU/DDS-LL T1 / CU & CUADSL2-TX ANX A Modules, US $2,695.00 – Picture 4

JDSU HST-3000C Tester w/ HST-3000 CU/DDS-LL T1 / CU & CUADSL2-TX ANX A Modules, US $2,695.00 – Picture 5

JDSU HST-3000C Tester w/ HST-3000 CU/DDS-LL T1 / CU & CUADSL2-TX ANX A Modules, US $2,695.00 – Picture 6

Jdsu Hst-3000c Tester W/ Hst-3000 Cu/dds-ll T1 / Cu & Cuadsl2-tx Anx A Modules

US $2,695.00

Toledo, Ohio, United States
Jan 29th

Open on mobile:
QR code

Content on this page requires a newer version of Adobe Flash Player. The Following Items Are Included: JDSU HST-3000C HandHeld Consumer Services Tester (BC# 18554) With: ISDN PRI PCM TIMS Pulse Shape T1 Signaling TDR VT100 Emulation JDSU HST-3000 SIM CU/DDS-LL Module (BC# 18555) JDSU HST-3000 SIM T1/CU Module (BC# 18556) JDSU HST-3000 CUADSL2-TX ANX A Module (BC# 18423) Test Lead Set (2) Ethernet Cables Bantam Cable JDSU HST-000-603-01 FlashDrive w/ Software & Manuals AC Adapter/Charger Power Cord Strap For Case Carrying Case BE SURE TO CHECK OUR EBAY STORE FOR OTHER ITEMS! This Item Has A Current Calibration! JDSU HST-3000C HandHeld Consumer Services Tester w/ HST-3000 SIM CU/DDS-LL Copper DDS Local Loopback Module & HST-3000 SIM T1 / CU T1 Service Interface Module & HST-3000 SIM CUADSL2-TX Copper ADSL2 ANX A Module INCLUDED MODULES: - HST-3000 SIM CU/DDS-LL Module (Quickly Qualify and Troubleshoot Local Loop Installation) - HST-3000 SIM T1/CU Module (Thorough T1 testing including BERT, loopcodes, and NIU/CSU emulation) - HST-3000 SIM CUADSL2-TX ANX A Module (Copper, ADSL, & ADSL2 Testing For Annex A) Installed Options: - ISDN PRI - PCM TIMS - Pulse Shape - T1 Signaling - TDR - VT100 Emulation Includes Carrying Case & Accessories As Listed Above! Working Condition: Excellent Condition: Refurbished Calibrated: Yes Warranty: 90 Day Exchange Warranty Acterna HST-3000 Handheld Consumer Services Tester Improving the installation, maintenance and troubleshooting of DSL services With a market primed for broadband, operators are rapidly deploying DSL in their networks to deliver multimedia services over the existing copper wire in the local loop. Traditionally, one set of technicians performed individualized tests that qualified the copper while another set conducted DSL services testing and verification. In today’s market, however, operators can no longer afford the time, capital expense, and labor costs to conduct tests separately and incrementally. Furthermore, test solutions must generate results that have a strategic impact throughout an operator’s entire organization. This may include building customer loyalty by locating and fixing problems quickly, improving profitability by performing more tests with less staff, or leveraging workforce productivity by automating processes, methods, and procedures. The Acterna HST-3000 is a modular handheld tester that can be built to order, to test the copper, test the DSL service and improve the process. Technicians use the HST-3000 copper base instrumentand the copper service interface module (SIM) to qualify, maintain, and troubleshoot the local loop. This same base instrument, with a second SIM that tests both ADSL and the copper, enables one technician to perform tests thatwere previously conducted by two technicians using different equipment. For those technicians who only need to test ADSL, the instrument can be configured for ADSL functionality only. Any HST-3000 module equipped to perform ADSL service tests can also verify ISP and Internet connectivity with the Acterna Advanced IP Suite software option. With the HST-3000 minimize the time and reduce the capital expense and labor cost associated with ADSL and copper testing. Highlights A combined tester for Copper and DSL testing Lower repeat rates with automated close out tests, scripting/pass-fail tests, and back office integration Modular hardware and software architecture is flexible and easily upgraded Laptop/PC integration via RS-232, USB, or wireless for easy results transfer Intuitive, easy-to-use GUI, lightweight, rugged and water resistant Instrument Interface Specifications Dual TIP/RING and Ground POTS/Copper: Color-coded, shrouded 2mm “mini-banana” jacks ADSL: 8-pin modular 10/100 BT Ethernet jack: 8-pin modular Serial port: DB9 female via cable (DCE) USB Host USB Device Bluetooth short-range wireless ADSL Standards ANSI T1.413 ITU G.992. 1 Annex A ADSL over POTS (G.DMT) G.992.2 (G.Lite) Cisco CAP General Specifications Ruggedness: Survives 3-ft drop to concrete on all sides Water-resistance: Splash proof: may be used in heavy rain Language: English Keypad: Typical 12-button keyboard Physical Specifications Size (H x W x D): 9.5 x 4.5 x 2.75 in Weight: 2.7 lb with battery Operating temperature: 22°F to 122°F Storage temperature: –40°F to 150°F Battery life: 10 hrs. typical usage Charging time: 7 hours from full discharge to full charge Operating humidity: 10% to 80% relative humidity Storage humidity: 10% to 95% relative humidity Display: 1/4 VGA monochrome transflective, 3.8-in diagonal (readable in direct sunlight) HST-3000 SIM CU\DDS-LL Module Quickly Qualify and Troubleshoot Local Loop Installation DDS continues to provide a revenue stream for local loop services. However, installing DDS services at the customer’s premises can be extremely time-consuming and expensive. Technicians need to deploy and troubleshoot 4-wire DDS services effectively and efficiently, the first time. Meet these challenges with an easy-to-use, versatile test solution that reduces failures and repeat rates and enhances efficiency and ensures consistent test practices. Service providers, end users, and manufacturers can use the high-quality, proven HST-3000 to qualify and install local-loop services. Automated setups and advanced testing features give the control needed to initiate faster service turn-up and maintenance, better workforce productivity, lower costs, and increased profitability. Features: Test DDS rates from 2.4 to 64 kbps Field-portable solution for 4-wire DDS service testing Test the Copper, Test the Service, Improve the Process Equipped with the Copper Testing option and a copper Service Interface Module , the HST-3000 can quickly troubleshoot the local loop for line impairments that degrade or impair T1 performance. With the HST-3000, technicians can quickly identify and locate cable impairments: shorts, grounds, opens, crosses, bridged taps, wet sections and other high resistive faults. These impairments are easy to access with the HST-3000's advanced time domain reflectometer (TDR), precision digital volt/ohm meter (DVOM) and an accurate resistive fault locator (RFL) to pinpoint troubles prior to circuit installation. Copper test features are optimized for use anywhere on the local loop at the NID, cross box, pedestal, main distribution frame or anywhere a technician might gain access to the local loop to locate the source of trouble. Test the Copper Test the Triple Play DVOM TDR Balance Loads Opens Complete copper testing to support VDSL/VDSL2 and triple-play deployments Expanded copper testing frequency range Tx/Rx Tones ranging from 100 kHz to 30 MHz Wideband Noise measurements from +15 to -90 dBm Impulse Noise measurements from +15 to -60 dBm Spectral analysis with spectral masks and band plans up to 30 MHz (-28 to -150 dBm/Hz) Specifications: Operating Modes Terminate Term Impedance Rx 135 Ohms ±5% DDS Data Rates 2.4, 4.8, 9.6, 19.2, 56, and 64 kb Secondary Channel IDLE, 511, 2047 Data Support BERT Clock Source Internal Internal Recovered Receive Signal Range +6.0 to –43dB (56 to 64k rates) +6.0 to –34 dB (all other subrates) Transmitter Output Levels 0, 3, 6, and 9 dB HST-3000 SIM T1 / CU T1 Service Interface Module Key Features Thorough T1 testing including BERT, loopcodes, and NIU/CSU emulation VT100 emulation for access to T1,HDSL,HDSL2, HDSL2-4 wire performance statistics Copper option adds in-depth copper measurements including DVOM, graphical TDR, RFA/RFL, and load coil counter Lower repeat rates with automated close out tests, scripting, and pass/fail tests loaded with operator specific thresholds for methods and procedures Modular hardware and software architecture allows easy upgrades and enhancements T-BERD® advanced stress patterns, intelligent repeater loop codes, and BERT patterns included NetAnalyst control of Data Network Analyzer test devices The JDSU HST-3000 is the ideal instrument for testing T1 services with built-in functionality that reduces repeat rates, failures, and kickbacks and ensures that all tests are performed the same way, every time. Reduced budgets, smaller workforces, and untrained technicians can limit a carrier’s ability to promptly provision T1 service. Overcoming these obstacles requires resources that facilitate the efficient and rapid deployment of T1 services regardless of whether the T1 line uses traditional repeaters, HDSL, HDSL2, or HDSL2 4-wire circuits. Technicians use the HST-3000 optional copper test features to qualify and troubleshoot the circuit, and the T1 test features to bit-error-rate test (BERT) the line and verify the service. With the VT100 emulation feature, the HST-3000 provides instant access to HDSL/2/4 performance statistics. There is no need for technicians to switch instruments or modules; the HST-3000 combines all the tests into one tool with one common interface. The HST-3000 custom scripting feature automates the testing process, ensuring that tests are done completely and thoroughly every time and helps reduce repeat rates and failures by ensuring that the processes used to test are consistent. With the HST-3000, technicians can complete faster service turn-ups, reduce failure rates, and lower costs, which are all key components to surviving in today’s competitive environment. Loopback Testing Preprogrammed HTU-C, HTU-R, doubler, T1 CSU, T1 NIU, and repeater loopcodes enable the HST-3000 to quickly sectionalize transmission problems. In addition, Pairgain, Teltrend, Adtran, Westell, and ADC equipment specific loopcodes, as well as user configurable loopcodes, are supported. The test set can also emulate T1 customer premises equipment, simulating a CSU or NIU. CSU/NIU emulation allows the test set to be looped up from the central office to verify T1 service across the entire length of the span. Dual T1 Transmit and Receive The HST-3000 dual T1 transmit and receive capabilities give the ability to measure timing slips, passively monitor T1 circuits in both directions, and perform drop and insert testing. Using the split screen view in dual monitor mode, a span is easily sectionalized to quickly determine the location of a fault. Drop and insert testing allows the user to BERT single DS0s within a T1, without taking the entire T1 out of service. HDSL/2/4 Through the test instrument’s VT100 emulation feature, technicians can access HDSL and T1 network equipment for equipment configuration, specific performance data measurements, and loop up capabilities, without having to carry a laptop into the field. With JDSU’s repeater extender, technicians can also gain access to the circuit at T1 repeaters. Fractional T1 The HST-3000 performs fractional T1 (FT1) BER tests on selected channels to verify transmission on contiguous and noncontiguous FT1 bandwidth. This allows the technician to verify circuit performance with VF and 577 Hz ID tones at various output levels. In addition, the HST-3000 uses a variety of advanced stress patterns such as 55 octet, T1-DALY, and other long user patterns as recommended by the ANSI T1.403 standard to stress repeatered T1/FT1 circuits. With its enhanced T1 features and functions, the HST-3000 is the ideal test instrument for technicians to troubleshoot and qualify the line swiftly and effortlessly. Flexible and Rugged Design The HST-3000 incorporates a rugged, weather-resistant design and long battery life that are ideally suited for use in the field and its modularity allows for field upgrades to support new testing requirements. The HST-3000 is easily upgradeable with technologies and advanced options that support the changing needs of service installers and its dynamic configurability allows it to be used by different technicians with different responsibilities to perform a wide number of tests. Standard Ethernet, USB, and serial connections offer flexibility to easily download software and offload captured test data. Overview Beginning with the construction of the circuit, and throughout the life cycle of the service, operators must verify that customers are receiving the quality they ordered. Whether qualifying the copper before handing the circuit over to an installation and maintenance crew, a technician must run a bit-error-rate test (BERT) to prequalify the circuit to ensure that it will run T1 service error free. DS1 BERT To verify proper T1 transmission over a traditional repeatered T1 or an HDSL circuit, a technician needs to test the entire span from the central office to the customer premises. A true end-to-end service test requires stressing the span and verifying the error tolerance of the copper plant and network equipment. The HST-3000 includes the advanced stress patterns of the T-BERD to properly stress the network. SIM CUADSL2-TX ANX A Module The HST’s copper testing features allow quick turn-up and troubleshooting of the services provided over copper. This includes testing with DVOM, opens, power (Mains) influence (PI), noise, balance, time domain reflectometer (TDR), resistive fault locate (RFL), load coil detect, loss, wideband transmission impairment measurement set (WBTIMS), caller ID, and POTS dialer. The HST provides process customization through on-board auto tests and allows workflow improvements via connectivity to craft access terminals and back-office systems. The copper testing features include the following: Measuring AC and DC voltage, current, and resistance Measuring to opens (length of cable) Measuring balance, noise, and power (Mains) influence (PI) Locating cable faults with the TDR or RFL Detecting load coils Measuring loop loss (voiceband) including receiving and sending tones; transmission impairment testing (noise, SNR, return loss) Voice service and caller ID (CLID) testing WBTIMS and WB2 TIMS testing including sending/ receiving tones; measuring wideband, impulse, and spectral noise; and transmission impairment testing (noise, SNR, return loss, crosstalk) Automatic testing using scripts, including POTS close out, good pair check, and wideband auto tests. ADSL is designed to carry a digital signal, over a copper pair, above the voice frequency band (20 KHz–1.1 MHz) to enable high speed internet service over a standard POTS line. This allows “always on” internet access while simultaneously providing voice service. Typical POTS line quality will normally support ADSL, but the DSL service must be tested when trouble strikes. To troubleshoot DSL service, a modem emulation test set, such as the HST-3000, is needed. The DSLAM and network configuration is verified by connecting at the main distribution frame (MDF) where known interference and attenuation are minimal, as shown in Figure 1. The physical (ADSL) layer data rates and noise margins are reviewed to confirm that they match the service contract. Validate correct DSLAM and BRAS provisioning by connecting to the customer line and authenticating with the network through the DSLAM. Please check our Huge Inventory with savings of up to 80% off of retail on Cat5/5e/6 LAN Cable Certifiers and Fiber Optic OTDR's, Fusion Splicers, CATV Meters, Fiber Optic Kits, Sources, Meters, Tools, Network Analyzers and much more. Here is a Link to our Ebay Test Equipment Store. All of our Test Equipment is backed with a Full Warranty and unbeatable customer support & service. Please don't hesitate to contact us for a Quote on Something you don't see in our inventory, sometimes we have items that may have not been listed or processed yet. Test Equipment Store Offers a wide range of Refurbished Telecom/ Datacom Tools and Test Measurement Equipment. Which includes Fiber Optic Test and Splicing tools, Fusion Splicers, OTDRs, Copper and Fiber Cable Certifiers, CATV Test Equipment, Cable and Antenna Analyzers, Network Analyzers and much more! We carry a large inventory of quality refurbished and used test equipment from all the major manufacturers. If you are looking for multiple quantities or if we don't have a listing for a particular item that you are looking for. Please contact us as it may be fresh inventory waiting to be listed or we'll be glad to find it for you at the best price possible and put up an eBay listing for you! Contact: Test Equipment Store eBay Sales Phone: 1-419-517-6681 Toll Free : 1-800-548-2381 We Ship World Wide! We will attempt to ship your item(s) within 24 hours after payment has been received. To get a real-time shipping quote to your destination, enter your country and zip / postal code information into the shipping calculator and click "Get Rate". Many countries impose their own customs, duties, tariffs, taxes, etc. on items being shipped from a foreign country. We do not cover those cost's and we recommend that you contact your countries customs agency for that information. We Offer Multiple Quantity Price & Shipping Discounts, Email Us If You Are Interested In Larger Quantities. UPS Ground United States USD 0.00 USPS Express Mail International (EMS) Worldwide USD 0.00 We accept credit card payment transactions via the online checkout system! The checkout process is designed so that it communicates with the merchant to confirm that payment has been made and cleared. Other methods of payment are outlined through the online checkout process. Winning bidders must contact us within 3 days after auction close if special payment arrangements are needed. Your payment is expected within 5 days after the auction close. Unpaid auctions will be forfeited after 5 days of the auction close and the Item(s) will be relisted for sale. Items will be shipped within 24 hours (1 Business Day) upon receipt of payment from the winning bidder. (Certain orders may take longer for processing due to comprehensive final service inspections) A Shipment Tracking number(s) will be provided to inform Buyers of their expected ETA (Estimated Time of Arrival). Tracking number(s) will be provided the same day as order shipment. Thank you ALL MAJOR CREDIT CARDS & PayPal ACCEPTED Powers Your Online Marketplace Make inventory management a breeze with Kyozou eBay Inventory Management Software

Condition:	Seller refurbished: An item that has been restored to working order by the eBay seller or a third party not approved by the manufacturer. This means the item has been inspected, cleaned, and repaired to full working order and is in excellent condition. This item may or may not be in original packaging. See the seller’s listing for full details. ...	Brand	JDSU
Model	HST-3000C