Jet Gap Bed Lathe Gh1340-a Enco Sharp Victor Summit Grizzly Acer 13x40 14x40

US $2400

  • Spring Branch, Texas, United States
  • Nov 6th
I'm selling my Jet GH-1340A lathe. It is in good shape, with lower use. I purchased it from Cornell University in Ithaca, NY. It was used in the engineering lab to build prototype goods for student final projects. The ways are in very good shape with no scoring. The gap bed has never been removed and fits very tight. The gear head sounds good. All gears can be easily shifted in and out of ehen the chuck is rotated (proper way). The cross feed only has .003" of backlash and can be tightened to adjust it to .000" if desired. Motor also has dual windings that add a high and low speed at the flip of a switch. It has a functioning coolant pump, but needs the flexible coolant line flexible end. I have also built a stand that raises the lathe about 4-5" to make it easier to operate. It also allows the lathe to be picked up with a forklift or pallet jack. I don't have a steady rest for this lathe. It is 230v 3 phase power. If you need a lesson on phase converters, let me know and I can tell you what you need to operate this with 230v single phase power. For an additional $65, I can buy and wire in an American Rotary brand digital static phase converter so the unit will take single phase (this will take 2-3 weeks to get the part in and installed). It is under power, so you can see and hear it run of you live close   Jet still makes a lathe that is almost identical and sells for $8,700. This is a fraction of the price. I can load on a trailer or strap to a pallet for free. This will ship from 78019 from a business location with a forklift. I will ship within 7 business days of payment. Specifications for Jet's website: Swing over bed: 13" Swing over cross slide: 7-25/32" Swing in gap: 18-3/4" Distance between centers: 43" Bed width: 7-3/8" Spindle nose: D1-4 Camlock Spindle center: #3 MT Hole through spindle: 1-3/8" Spindle speeds: (8) 70-2000 rpm Longitudinal feeds: (40) 0.0018-0.0374 ipr Cross feeds: (40) 0.0006-0.030 ipr Threads: (38) 3-1/2-80 tpi Metric threads: (23) .45-10mm pitch Tailstock center: #3MT Quill travel: Voltage: 3-3/4" 220 Volt, 3 Phase Main spindle motor: 2 HP  Approx dimensions: 73" W x 32" D x 48" H Approx weight: 2,000 lbs


Similar products from Turning Lathes

People who viewed this item also vieved

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies