joint steel for sale, brand-new and used.

69-Pc. Set - for use with 9/16" or 5/8" T-slotted machine tables Includes: 6 step block pairs 4 coupling nuts 6 flange nuts 4 - 9/16" T-slot nuts 4 - 5/8" T-slot nuts 24 studs (4 each: 3, 4, 5, 6, 7, and 8" lengths) 6 step clamps two 1-3/4" wide U-clamp sets (consisting of two 5" studs, 2 flange nuts, 2 ball joint U-clamps, and two 9/16" T-slot nuts) storage rack. All components made of hardened steel alloy.

2090H6C.50 New Unknown Parker Hannifin / Skinner Valve, Tank Lid Tube Fitting Assemblies, Part Number VA22021, or 200643000, or 4305F-R, or 16-200865-00R A, or 16-200865-000. Each bid quantity is for a Lot of Five (5) Pieces. You may bid / buy any number of lots, up to the total quantity available above.

Includes: - 12x 10mmx10mm N52 Magnets - 12x 10mm steel bearing balls - 1x 3D printed PLA effector - 3x 3D printed PLA carriages Note: It is a kit and you need to assembly yourself. Use AB glue to fix the steel ball on the effector and carriage. You also need 6x 10mm carbon fiber tube.

(Blue) Makerbot Replicator 1 & 2 Extruder Upgrade, Thingomatic w/MK7 Extruder - Delrin Plunger Replacement: I had real problems using the delrin plunger system so I purchased a spring loaded extruder upgrade but still had a few problems with not having enough pressure from the spring to keep the plastic against the drive gear (slippage). I redesigned a similar upgrade and use a heavier and stiffer spring then what I originally was using.

(Red) Makerbot Replicator 1 & 2 Extruder Upgrade, Thingomatic w/MK7 Extruder - Delrin Plunger Replacement: I had real problems using the delrin plunger system so I purchased a spring loaded extruder upgrade but still had a few problems with not having enough pressure from the spring to keep the plastic against the drive gear (slippage). I redesigned a similar upgrade and use a heavier and stiffer spring then what I originally was using.

(Red) Makerbot Replicator 1 & 2 Extruder Upgrade, Thingomatic w/MK7 Extruder - Delrin Plunger Replacement: I had real problems using the delrin plunger system so I purchased a spring loaded extruder upgrade but still had a few problems with not having enough pressure from the spring to keep the plastic against the drive gear (slippage). I redesigned a similar upgrade and use a heavier and stiffer spring then what I originally was using.

(2) (Left and Right) (Red) Makerbot Replicator 1 & 2 Dual Extruder Upgrade, Thingomatic w/MK7 Extruder - Delrin Plunger Replacement:I had real problems using the delrin plunger system so I purchased a spring loaded extruder upgrade but still had a few problems with not having enough pressure from the spring to keep the plastic against the drive gear (slippage). I redesigned a similar upgrade and use a heavier and stiffer spring then what I originally was using.

Minitec 21.1029 T-Slot Bar 90 (Lot of 14) 90mm long steel T shaped bar, zinc plated 2 set screws M8x14 End to end but joint of profiles Profile extension Bar is a pressure fit in t-slot assuring accurate profile alignment We always combine shipments and refund the excess shipping by PayPal. Powered by SixBit's eCom

From local sewing factory liquidation. Found this in a box in the mechanics area labeled "notchers". Looks like 2 similar notch making attachments for industrial sewing machine.

Neptune – SS NEPTUNE – SS Solder/Torch Orange Tip Iron or furnace For aluminum and aluminum to all other metals. FEATURES • Good strength 7,500 psi • Thin flowing • Good color match • May be preplaced • Low Temperature • Works with zinc die casting • Seals cracks • Easy to use CHARACTERISTICS NEPTUNE-SS is a very low temperature solder product, developed for easy joining of aluminum tubing, castings, sheets, etc.

E6013 is a mild-steel, all position, general purpose cellulose-base rod. It operates on AC or DC welding current and works well on low voltage AC machines. E6013 is an excellent choice where there is poor fit-up in the joint.

E6013 is a mild-steel, all position, general purpose cellulose-base rod. It operates on AC or DC welding current and works well on low voltage AC machines. E6013 is an excellent choice where there is poor fit-up in the joint.

Geffen - Best deals on eBay NEW Vermont American 31265 1/4-Inch by 6TPI by 80-Inch Wood Cutting Band Saw Blade

ebay