joint steel for sale, brand-new and used.

Includes: - 12x 10mmx10mm N52 Magnets - 12x 10mm steel bearing balls - 1x 3D printed PLA effector - 3x 3D printed PLA carriages Note: It is a kit and you need to assembly yourself. Use AB glue to fix the steel ball on the effector and carriage. You also need 6x 10mm carbon fiber tube.

(Blue) Makerbot Replicator 1 & 2 Extruder Upgrade, Thingomatic w/MK7 Extruder - Delrin Plunger Replacement: I had real problems using the delrin plunger system so I purchased a spring loaded extruder upgrade but still had a few problems with not having enough pressure from the spring to keep the plastic against the drive gear (slippage). I redesigned a similar upgrade and use a heavier and stiffer spring then what I originally was using.

(Red) Makerbot Replicator 1 & 2 Extruder Upgrade, Thingomatic w/MK7 Extruder - Delrin Plunger Replacement: I had real problems using the delrin plunger system so I purchased a spring loaded extruder upgrade but still had a few problems with not having enough pressure from the spring to keep the plastic against the drive gear (slippage). I redesigned a similar upgrade and use a heavier and stiffer spring then what I originally was using.

(Red) Makerbot Replicator 1 & 2 Extruder Upgrade, Thingomatic w/MK7 Extruder - Delrin Plunger Replacement: I had real problems using the delrin plunger system so I purchased a spring loaded extruder upgrade but still had a few problems with not having enough pressure from the spring to keep the plastic against the drive gear (slippage). I redesigned a similar upgrade and use a heavier and stiffer spring then what I originally was using.

(2) (Left and Right) (Red) Makerbot Replicator 1 & 2 Dual Extruder Upgrade, Thingomatic w/MK7 Extruder - Delrin Plunger Replacement:I had real problems using the delrin plunger system so I purchased a spring loaded extruder upgrade but still had a few problems with not having enough pressure from the spring to keep the plastic against the drive gear (slippage). I redesigned a similar upgrade and use a heavier and stiffer spring then what I originally was using.

McElroy's TracStar No.618 You are looking at a brand new McElroy TracStar No.618. This is not an older model machine (The machine is part of the newest line of McElroy's fusion equipment). The machine package includes the machine, heater, facer, heater stand, and lifting device.

Continuous paddle mixer, approx. 100 cu. ft.

Stainless steel ventury suction 4-inch nozzle (2-inch and 3-inch nozzles available) MADE IN AUSTRALIA Lasts much longer compared to mild steel . (Avoid buying mild nozzles, they last one season , due to abrasion you will finish with a hole next

Stainless steel venturi suction 3-inch nozzle (2-, 4- inch available in stock) MADE IN AUSTRALIA Lasts much longer compared to mild steel . (Avoid buying mild nozzles, they last one season , due to abrasion you will

*Please Read Before Bidding* Your are looking at HARRIS STAY-SILV 5 PHOS-COPPER SILVER BRAZING ALLOY (10 pieces) 19.5" x 1/8" x .050" Brand new. Payment due within 7 day from auction end date. Items will ship in 3-4 business days.

Minitec 21.1029 T-Slot Bar 90 (Lot of 14) 90mm long steel T shaped bar, zinc plated 2 set screws M8x14 End to end but joint of profiles Profile extension Bar is a pressure fit in t-slot assuring accurate profile alignment We always combine shipments and refund the excess shipping by PayPal. Powered by SixBit's eCom

Eliminate soldering problems with the Teknek Surface Mount Clean Machine, the SMCM2. Removing contamination from the surface of a board prior to solder paste printing or adhesive placement improves production process as well as increasing your yield and profits. Contamination on bare boards causes problems in three areas:

From local sewing factory liquidation. Found this in a box in the mechanics area labeled "notchers". Looks like 2 similar notch making attachments for industrial sewing machine.

NORTH QTLB-36D Push Pull Welding Gun 200-350A 0.6-1.2 Wire DC24V Motor Drive 5M 16.4 ft.

Brand new-never opened package of 10lbs of M289 Contaminated Cast Iron (Alloy) welding rod. Older packaging just shows wear, still sealed. Please know your application before bidding.

Neptune – SS NEPTUNE – SS Solder/Torch Orange Tip Iron or furnace For aluminum and aluminum to all other metals. FEATURES • Good strength 7,500 psi • Thin flowing • Good color match • May be preplaced • Low Temperature • Works with zinc die casting • Seals cracks • Easy to use CHARACTERISTICS NEPTUNE-SS is a very low temperature solder product, developed for easy joining of aluminum tubing, castings, sheets, etc.