+ Post new Ad
Kaiser CAT50 Taper Milling Holder 31 mm 1.220" Inch ID 11.335.308 Bore Pull Stud, US $69.99 – Picture 0
Kaiser CAT50 Taper Milling Holder 31 mm 1.220" Inch ID 11.335.308 Bore Pull Stud, US $69.99 – Picture 1
Kaiser CAT50 Taper Milling Holder 31 mm 1.220" Inch ID 11.335.308 Bore Pull Stud, US $69.99 – Picture 2
Kaiser CAT50 Taper Milling Holder 31 mm 1.220" Inch ID 11.335.308 Bore Pull Stud, US $69.99 – Picture 0
Kaiser CAT50 Taper Milling Holder 31 mm 1.220" Inch ID 11.335.308 Bore Pull Stud, US $69.99 – Picture 1
Kaiser CAT50 Taper Milling Holder 31 mm 1.220" Inch ID 11.335.308 Bore Pull Stud, US $69.99 – Picture 2

Kaiser Cat50 Taper Milling Holder 31 Mm 1.220" Inch Id 11.335.308 Bore Pull Stud

US $69.99

  • Windsor, Connecticut, United States
  • Feb 28th
Open on mobile:
QR code
                                         Mahr Internal Thread Gage M18x1.5 Manufacturer:   Kaiser Description 31mm bore CAT-50 Taper tool holder - milling  No retention know included                            All purchases must be paid with wire transfer or PayPal.                                     Item will be shipped after payment is recieved and cleared. Buyer is responsible for all shipping costs. If item must be shipped via freight then the buyer is responsible for making all arrangements and must contact  us to arrange a pick up time.                                      You can contact us through ebays messaging system or at sales@aircomtechnologysales.com. You will recieve a response within 24 hours. If you would like to contact us immediately you may call 860-688-3320.                                                    Note that all sales are final. Items are sold as-is and unless stated as in used but in working condition and you recieve  the item not working no refunds will be given.                                                                                                                          
Condition:
Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections. ...
Manufacturer Kaiser
Model 11.335.308
Brand 11.335.308

Directions

Similar products from CT Tapers & Holders

SMITH TOOL CAT40 1/2" DIA ENDMILL HOLDER MORE LISTED CAT 40 END MILL LOT C11804

SMITH TOOL CAT40 1/2" DIA ENDMILL HOLDER MORE LISTED CAT 40 END MILL LOT C11804

  • Dayton, Ohio, United States
  • Mar 1st
PARLEC CAT40 1/4" DIA ENDMILL HOLDER MORE LISTED CAT 40 END MILL LOT C11803

PARLEC CAT40 1/4" DIA ENDMILL HOLDER MORE LISTED CAT 40 END MILL LOT C11803

  • Dayton, Ohio, United States
  • Mar 1st
Fadal Pull Stud Retention Knob

Fadal Pull Stud Retention Knob

  • Mount Hope, Ontario, Canada
  • Mar 1st
Kennametal cat30 tool holder #QC30EM050175 For 1/2" Dia. Tooling

Kennametal cat30 tool holder #QC30EM050175 For 1/2" Dia. Tooling

  • Honeoye Falls, New York, United States
  • Mar 1st
PARLEC pc2-2215

PARLEC pc2-2215

  • Waterbury, Connecticut, United States
  • Mar 1st
MST CORP. CAT 40 PRECISION COLLET HOLDER

MST CORP. CAT 40 PRECISION COLLET HOLDER

  • Salem, Ohio, United States
  • Mar 1st
CARBOLOY CAT 45-.750 END MILL HOLDER

CARBOLOY CAT 45-.750 END MILL HOLDER

  • Salem, Ohio, United States
  • Mar 1st
COMMAND CAT 40 5/8" END MILL HOLDER C4E3 0625

COMMAND CAT 40 5/8" END MILL HOLDER C4E3 0625

  • Minneapolis, Minnesota, United States
  • Mar 1st
Huot 40 Taper Tool Storage, 3 Used

Huot 40 Taper Tool Storage, 3 Used

  • Pittsburgh, Pennsylvania, United States
  • Mar 1st
5 VARIOUS CAT 40 TOOL HOLDERS WITH TWO RETENTION KNOBS.

5 VARIOUS CAT 40 TOOL HOLDERS WITH TWO RETENTION KNOBS.

  • Anaheim, California, United States
  • Feb 28th
Kaiser CAT50 Taper Milling Holder Boring Head Holder 11.356.652 Modular KAB5 CNC

Kaiser CAT50 Taper Milling Holder Boring Head Holder 11.356.652 Modular KAB5 CNC

  • Windsor, Connecticut, United States
  • Feb 28th
Briney CAT50 Taper V50E-25MM-400 ID Boring Tool 25 MM .984" Endmill Retention NC

Briney CAT50 Taper V50E-25MM-400 ID Boring Tool 25 MM .984" Endmill Retention NC

  • Windsor, Connecticut, United States
  • Feb 28th
Kennametal Powergrip CAT-50 Taper Milling Chuck CV50SD12338 1-1/4" 1.250" ID

Kennametal Powergrip CAT-50 Taper Milling Chuck CV50SD12338 1-1/4" 1.250" ID

  • Windsor, Connecticut, United States
  • Feb 28th
INGERSOLL CAT 50 1.25" END MILL HOLDER 761P032 2197037 D 4" PROJ (LOC282) TS13

INGERSOLL CAT 50 1.25" END MILL HOLDER 761P032 2197037 D 4" PROJ (LOC282) TS13

  • Laingsburg, Michigan, United States
  • Feb 28th
Briney CAT50 Taper V50BR-32-400 Milling Holder ER32 Collet Chuck Retention Knob

Briney CAT50 Taper V50BR-32-400 Milling Holder ER32 Collet Chuck Retention Knob

  • Windsor, Connecticut, United States
  • Feb 28th
Kennametal CAT50 Taper Milling Holder Collet chuck TG Style Erickson Holder 100

Kennametal CAT50 Taper Milling Holder Collet chuck TG Style Erickson Holder 100

  • Windsor, Connecticut, United States
  • Feb 28th
HAAS TOOL HOLDER CAT 40 .750

HAAS TOOL HOLDER CAT 40 .750

  • San Bernardino, California, United States
  • Feb 28th
New Collet Mandrel Holder IS040-ER40

New Collet Mandrel Holder IS040-ER40

  • Kingston, Massachusetts, United States
  • Feb 28th
Sandvik A394.45.0-50 63 130-0 CAT-50 Milling Holder Varilock Coromant Taper CNC

Sandvik A394.45.0-50 63 130-0 CAT-50 Milling Holder Varilock Coromant Taper CNC

  • Windsor, Connecticut, United States
  • Feb 28th
Briney CAT50 Taper V50BR-32-400 Milling Holder ER32 Collet Chuck REGO-FIX Swiss

Briney CAT50 Taper V50BR-32-400 Milling Holder ER32 Collet Chuck REGO-FIX Swiss

  • Windsor, Connecticut, United States
  • Feb 28th

People who viewed this item also vieved

Janesville Arbor Press ILP 500

Janesville Arbor Press ILP 500

  • East New Market, Maryland, United States
  • Jan 30th
Greenerd Arbor Press No. 1 Cast Iron

Greenerd Arbor Press No. 1 Cast Iron

  • Bellefonte, Pennsylvania, United States
  • Jan 30th
Quick change tool and cutter holder for Craftsman Atlas Lathe

Quick change tool and cutter holder for Craftsman Atlas Lathe

  • Alpharetta, Georgia, United States
  • Jan 30th
Enco Case Hardened Steel Cut-off Blade Holders (250-1774)

Enco Case Hardened Steel Cut-off Blade Holders (250-1774)

  • Hillside, New Jersey, United States
  • Jan 30th
Tool Holder BT40 1/4” Endmill Used, Good

Tool Holder BT40 1/4” Endmill Used, Good

  • Sykesville, Maryland, United States
  • Jan 30th
Tool Holder BT40 1/2” Endmill Used, Good

Tool Holder BT40 1/2” Endmill Used, Good

  • Sykesville, Maryland, United States
  • Jan 30th
NEW TB WOODS JX3 7/8 SURE-GRIP SFB D1 SPLIT 3-7/8 IN QD BUSHING B446735

NEW TB WOODS JX3 7/8 SURE-GRIP SFB D1 SPLIT 3-7/8 IN QD BUSHING B446735

  • Buffalo, New York, United States
  • Jan 30th
BROWNING Q1-1-5/8 SPLIT TAPER LOCK BUSHING 1-5/8" BORE STEEL, NEW

BROWNING Q1-1-5/8 SPLIT TAPER LOCK BUSHING 1-5/8" BORE STEEL, NEW

  • Shreveport, Louisiana, United States
  • Jan 30th
DEVLIEG Microbore Carbide Tipped Insert Cartridge 3A4F

DEVLIEG Microbore Carbide Tipped Insert Cartridge 3A4F

  • Johnson City, New York, United States
  • Jan 30th
DEVLIEG Microbore Carbide Tipped Insert Cartridge 3A2F

DEVLIEG Microbore Carbide Tipped Insert Cartridge 3A2F

  • Johnson City, New York, United States
  • Jan 30th
6 PCS. NEW KEO USA # 16 COMBINATION CENTER DRILL & COUNTERSINK

6 PCS. NEW KEO USA # 16 COMBINATION CENTER DRILL & COUNTERSINK

  • McAllen, Texas, United States
  • Jan 30th
Rego-Fix CYL32x070/ER25MF Holder

Rego-Fix CYL32x070/ER25MF Holder

  • Cicero, Illinois, United States
  • Jan 30th
Jacobs Model 16N 5/8" x 3JT Super Ball Bearing Keyed Drill Chuck

Jacobs Model 16N 5/8" x 3JT Super Ball Bearing Keyed Drill Chuck

  • Scottsburg, Indiana, United States
  • Feb 16th
Chuck Key 4 in 1 Small ATE

Chuck Key 4 in 1 Small ATE

  • Grand Prairie, Texas, United States
  • Feb 16th
CA 1-3/8'' Heavy Duty Boring Bar Holder Quick Change Tool Holder, #0250-0441

CA 1-3/8'' Heavy Duty Boring Bar Holder Quick Change Tool Holder, #0250-0441

  • Richmond Hill, Ontario, Canada
  • Feb 28th
ALORIS CA #2 BORING, TURNING & FACING HOLDER GROOVE 1/2" to 1" CAP USA

ALORIS CA #2 BORING, TURNING & FACING HOLDER GROOVE 1/2" to 1" CAP USA

  • Modesto, California, United States
  • Feb 28th
Cincinnati Arbor/Spindle for 2-24-PL

Cincinnati Arbor/Spindle for 2-24-PL

  • Monmouth, Oregon, United States
  • May 18th
Gilman Motorized Spindle 1875N-01-CA-B1 Unused Old Stock ER32 Collet

Gilman Motorized Spindle 1875N-01-CA-B1 Unused Old Stock ER32 Collet

  • Glasgow, Kentucky, United States
  • May 19th
3M Star Mandrel 944, Threaded Attachment, 1/4" Diameter x 3" Length, 1/4"-20 New

3M Star Mandrel 944, Threaded Attachment, 1/4" Diameter x 3" Length, 1/4"-20 New

  • United States
  • Jun 10th
1/4 X 3-3/4 INCH LATHE MANDREL (3902-2016)

1/4 X 3-3/4 INCH LATHE MANDREL (3902-2016)

  • Chino, California, United States
  • Jun 10th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies