Keithley Inovision Fluke Dosimeter Xray mAs KV Meter Triad Divider TNT Victoreen, US $3,500.00 – Picture 0

Keithley Inovision Fluke Dosimeter Xray mAs KV Meter Triad Divider TNT Victoreen, US $3,500.00 – Picture 1

Keithley Inovision Fluke Dosimeter Xray mAs KV Meter Triad Divider TNT Victoreen, US $3,500.00 – Picture 2

Keithley Inovision Fluke Dosimeter Xray mAs KV Meter Triad Divider TNT Victoreen, US $3,500.00 – Picture 3

Keithley Inovision Fluke Dosimeter Xray mAs KV Meter Triad Divider TNT Victoreen, US $3,500.00 – Picture 4

Keithley Inovision Fluke Dosimeter Xray mAs KV Meter Triad Divider TNT Victoreen, US $3,500.00 – Picture 5

Keithley Inovision Fluke Dosimeter Xray mAs KV Meter Triad Divider TNT Victoreen, US $3,500.00 – Picture 6

Keithley Inovision Fluke Dosimeter Xray mAs KV Meter Triad Divider TNT Victoreen, US $3,500.00 – Picture 7

Keithley Inovision Fluke Dosimeter Xray mAs KV Meter Triad Divider TNT Victoreen, US $3,500.00 – Picture 8

Keithley Inovision Fluke Dosimeter Xray mAs KV Meter Triad Divider TNT Victoreen, US $3,500.00 – Picture 9

Keithley Inovision Fluke Dosimeter Xray mAs KV Meter Triad Divider TNT Victoreen, US $3,500.00 – Picture 10

Keithley Inovision Fluke Dosimeter Xray mAs KV Meter Triad Divider TNT Victoreen, US $3,500.00 – Picture 11

Keithley Inovision Fluke Dosimeter Xray Mas Kv Meter Triad Divider Tnt Victoreen

US $3,500.00

Fowler, Ohio, United States
Jun 9th

Open on mobile:
QR code

3 photos show me testing the kit at 70 KVp and 40 mAs selected on the blue-ish xray console. as you can see it read 70.7 KV = perfect. note-- i put white tape on the meters just to keep them in order and in a calibrated set as i have more than one xray kit. color coding w tape is way easier than remembering all the serial numbers. this is a very nice keithley/ inovision/ fluke biomedical NON-INVASIVE XRAY test kit with many accessories. the instruments in this kit will measure an xray/mammo systems KV Time Radiation and mA/mAs--everything you would ever need to Q/A test or trouble shoot an xray unit . NOTE--no additional equipment is needed to do these measurements. also, i put NEW batteries in all of the 3 boxes a short while ago. this kit works just fine and i re-tested it just for the heck of it-- and it perfectly matched a newly calibrated unit right on, and even though its right on the money, i have to list it as "used and as-is" according to ebay even though it looks and works like brand NEW. and keep in mind that JUST a new fluke ma/mas meter alone cost 1350.00, new this kit is about 13,000. i have seen this kit for sale online for 9500 high end and still in cal to ones that are 2500 and low end which were not this nice and out of cal by a few years more. note i dont want to bash other sellers, but i test stuff first to make sure it WORKS and just ask yourself this-- do you want to buy from someone who doesnt even bother-- or know HOW to-- put 15 dollars worth of new batteries in an expensive 4000 dollar item, or a seller who does the extra effort and gives you new batteries. for these prices you deserve that small extra detail IMO. -- i work service in xray / medical imaging-- i dont just sell stuff in it. this kit was factory caled a few years ago and i can tell you most all the xray test equipment doesnt need caled every year. i have a 15 yr old fluke meter that reads exactly like a new one and it has never been caled, but we all know why the gvt wants us to cal stuff now dont we -- $$$. ok, enough complaining. so.., this kit also has a very nice set of HVL--half value layer- aluminum filter plates. a new the HVL set runs over 600 last time i checked. the HVL size thicknesses are 0.05mm 0.1mm 0.2mm. 0.5mm 1mm 2mm plates and they ALL look like they were well -taken care of. the photo of the plates shows you what is included in this kit that is written on the yellow post it taped to the plate pack. also included in this kit is a collimator alignment tool and it goes with the 8x10 gold /copper colored metal plate and these 2 ps have a part # of 07-661-7662 and cost a ton of $$ new just by itself from fluke. also with this kit is a set of printed out paper user manuals--1 full and 2 partial--partial means only the good stuff is included there, of course. **** important note--this kit WORKS and has been TESTED GOOD. dont buy someone else's unknown/ partially working kit/meters that will cost you over a 1000.00 to get repaired. believe me, i have went thru that myself when i have bought meters that i thought were good but were actually broke internally. just because a meter turns on and powers up, does not mean it works. infact--my last repair bill from fluke was 1300.00 and THAT was what they called a simple board repair--wow included in this WORKING kit-- 35035 mAs meter, KV mammo/xray-diagnosic 35080B divider, Rad/KVp 35050A dosimeter dose meter, cable spool reel and cables , mammo/Xray ion chambers--3 different KV/mammo divider sensor packs, test leads, full set of aluminum HVL plates, extra batter holder, test stand aparatus kit, other accessories and case, basically what you see in the photos is what you get. ** a buyer asked me what the last cal date was.-- see it in the photo.... also, i posted photos which shows me testing the kit on a XRAY unit with a KVp wide range pack in the divider. note--the CT pack is an option and is not included in this kit, i have tested this kit on a CT and a xray Rad room and it worked perfect.. ** note-- fluke biomedical inovison keithley victoreen unfors cardinal health and techtronics are now one big company--some people do not know this. shipping to main-land USA states only.......... "Elsewhere"... mail me first b4 buying professionally shipped and packed. delivery signature confirmation included to anyone who makes me a reasonable BEST OFFER ; please look below the offer price for a counter-offer comment-- which i may leave to you. it may include another price discount option to your benefit or use my cybertron8 mail you see in the last photo to message me and get the deal done alot faster. thanks