+ Post new Ad
KENT MILLING MACHINE KTM 300 ACURITE DIGITAKL READ OUTS BRIDGEPORT KNOCK OFF, US $3,950.00 – Picture 0
KENT MILLING MACHINE KTM 300 ACURITE DIGITAKL READ OUTS BRIDGEPORT KNOCK OFF, US $3,950.00 – Picture 1
KENT MILLING MACHINE KTM 300 ACURITE DIGITAKL READ OUTS BRIDGEPORT KNOCK OFF, US $3,950.00 – Picture 2
KENT MILLING MACHINE KTM 300 ACURITE DIGITAKL READ OUTS BRIDGEPORT KNOCK OFF, US $3,950.00 – Picture 3
KENT MILLING MACHINE KTM 300 ACURITE DIGITAKL READ OUTS BRIDGEPORT KNOCK OFF, US $3,950.00 – Picture 4
KENT MILLING MACHINE KTM 300 ACURITE DIGITAKL READ OUTS BRIDGEPORT KNOCK OFF, US $3,950.00 – Picture 5
KENT MILLING MACHINE KTM 300 ACURITE DIGITAKL READ OUTS BRIDGEPORT KNOCK OFF, US $3,950.00 – Picture 6
KENT MILLING MACHINE KTM 300 ACURITE DIGITAKL READ OUTS BRIDGEPORT KNOCK OFF, US $3,950.00 – Picture 0
KENT MILLING MACHINE KTM 300 ACURITE DIGITAKL READ OUTS BRIDGEPORT KNOCK OFF, US $3,950.00 – Picture 1
KENT MILLING MACHINE KTM 300 ACURITE DIGITAKL READ OUTS BRIDGEPORT KNOCK OFF, US $3,950.00 – Picture 2
KENT MILLING MACHINE KTM 300 ACURITE DIGITAKL READ OUTS BRIDGEPORT KNOCK OFF, US $3,950.00 – Picture 3
KENT MILLING MACHINE KTM 300 ACURITE DIGITAKL READ OUTS BRIDGEPORT KNOCK OFF, US $3,950.00 – Picture 4
KENT MILLING MACHINE KTM 300 ACURITE DIGITAKL READ OUTS BRIDGEPORT KNOCK OFF, US $3,950.00 – Picture 5
KENT MILLING MACHINE KTM 300 ACURITE DIGITAKL READ OUTS BRIDGEPORT KNOCK OFF, US $3,950.00 – Picture 6

Kent Milling Machine Ktm 300 Acurite Digitakl Read Outs Bridgeport Knock Off

US $3,950.00

  • Hopkins, Minnesota, United States
  • Jun 9th
Open on mobile:
QR code
HERE IS A NICE RUNNING KENT VERTICAL MILL WITH ACCURITE DIGITAL READOUTS. THIS MILL CAN BE INSPECTED UNDER POWER IN MPLS MN. TO SET UP AN INSPECTION, PLEASE CALL JIM @ 952-931-7974. THANK YOU. NOTE: WE WILL LOAD ON YOUR FLAT BED, PICK UP, OR TRAILER FOR FREE. IF BUYER NEEDS THIS MILL BANDED TO A CUSTOM PALLET,, THERE WILL BE AN ADDITIONAL $200.00 ADDED TO PURCHASE PRICE. WE CAN ALSO HELP WITH FREIGHT QUOTES. GENERAL SPECIFICATIONS: MAKE: KENT MODEL: KTM-380 SERIAL NO: 851270-2 TABLE SIZE......................9" X 42" TABLE LONGITUDINAL TRAVEL..............29-7/8" TABLE CROSS TRAVEL...............14-15/16" VERTICAL KNEE TRAVEL.............16" SPINDLE SPEEDS.........................65 TO 2700 SPINDLE TRAVEL.........................5" SPINDLE POWER FEED REVOLUTIONS...............0.00015, 0.0028, 0.0049 MACHINE WEIGHT.............................................2900 LB EQUIPPED WITH: ACCURITE 2 AXIS DIGITAL READ OUTS PRICE LOADED ON YOUR TRUCK...............$3950.00 SOLD AS IS AS INSPECTED
Condition:
Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections. ...
Brand Kent
MPN KENT
Model KTM - 380

Directions

Similar products from Tools for Milling Machines

F&D Tool Co. 4" x 3/8" x 1" HSS 18 Tooth Milling Cutter A-7412

F&D Tool Co. 4" x 3/8" x 1" HSS 18 Tooth Milling Cutter A-7412

  • Venice, Florida, United States
  • Jun 9th
Gorton Master Mill *** NEW LOWER PRICE ***

Gorton Master Mill *** NEW LOWER PRICE ***

  • Pittsfield, Massachusetts, United States
  • Jun 9th
Yuasa R8 ENDMILL HOLDER 3/4 new old stock no box

Yuasa R8 ENDMILL HOLDER 3/4 new old stock no box

  • Fort Worth, Texas, United States
  • Jun 9th
NEW SECO 1-7/8" DIA FACEMILL 7/8" PILOT R220.69-0050-13 FACE MILL LOT C12129

NEW SECO 1-7/8" DIA FACEMILL 7/8" PILOT R220.69-0050-13 FACE MILL LOT C12129

  • Dayton, Ohio, United States
  • Jun 9th
Aussie ADP-123 Universal Air Powered Knee Mill Drawbar

Aussie ADP-123 Universal Air Powered Knee Mill Drawbar

  • Venice, Florida, United States
  • Jun 9th
Long Edge Hog Mill HW-020 .740" x 3/4" x 1.13" x 3.37" 2F 8-Insert

Long Edge Hog Mill HW-020 .740" x 3/4" x 1.13" x 3.37" 2F 8-Insert

  • Venice, Florida, United States
  • Jun 9th
Cincinnati No. 203-10 ML Horizontal Milling Machine with Motorized Overarm

Cincinnati No. 203-10 ML Horizontal Milling Machine with Motorized Overarm

  • Berlin, Connecticut, United States
  • Jun 9th
Mitsubishi AXD4000UR0203 Milling End Mill Cutter Face Shell Mill

Mitsubishi AXD4000UR0203 Milling End Mill Cutter Face Shell Mill

  • Loveland, Colorado, United States
  • Jun 9th
STARRETT EDGE FINDER 827B MACHINISTS MILLING

STARRETT EDGE FINDER 827B MACHINISTS MILLING

  • Lombard, Illinois, United States
  • Jun 9th
7mm .2756" ER-20 Round Collet

7mm .2756" ER-20 Round Collet

  • Petaluma, California, United States
  • Jun 9th
Bostomatic BD-12G Graphite CNC Mill VMC Year 2000

Bostomatic BD-12G Graphite CNC Mill VMC Year 2000

  • Lake Saint Louis, Missouri, United States
  • Jun 9th
BRIDGEPORT STEP PULLEY MILLING MACHINE 9" X 42" / RECENTLY REPAIRED

BRIDGEPORT STEP PULLEY MILLING MACHINE 9" X 42" / RECENTLY REPAIRED

  • Anaheim, California, United States
  • Jun 9th
Bridgeport Shaper E Head Bridgeport Milling Machine Great Shape!!!!

Bridgeport Shaper E Head Bridgeport Milling Machine Great Shape!!!!

  • Anaheim, California, United States
  • Jun 9th
Tungaloy Face Mill THF4405RIAU

Tungaloy Face Mill THF4405RIAU

  • Arcanum, Ohio, United States
  • Jun 9th
Flycutter 2 inch Diameter

Flycutter 2 inch Diameter

  • Haverford, Pennsylvania, United States
  • Jun 9th
2 MORSE / SUPER 6" x 1" CARBIDE-TIPPED MILLING CUTTERS w/ 1-1/4" BORES

2 MORSE / SUPER 6" x 1" CARBIDE-TIPPED MILLING CUTTERS w/ 1-1/4" BORES

  • Covina, California, United States
  • Jun 9th
NEW INVOLUTE GEAR CUTTER #4 48P 14.5PA 7/8"bore HS NATIONAL

NEW INVOLUTE GEAR CUTTER #4 48P 14.5PA 7/8"bore HS NATIONAL

  • Kelly, North Carolina, United States
  • Jun 9th
50 Destaco 2" Arbor Spacers Keywayed Horizontal Milling Machine Machinist Tool

50 Destaco 2" Arbor Spacers Keywayed Horizontal Milling Machine Machinist Tool

  • Yorktown, Virginia, United States
  • Jun 9th
2 5/8" OD x 4" x 1" bore Notched Slab Mill Cutter- Very good condition!

2 5/8" OD x 4" x 1" bore Notched Slab Mill Cutter- Very good condition!

  • Sherrill, New York, United States
  • Jun 9th
CARBOLOY 6" FACE MILL ZP15L 0608-R3 2" ARBOR FUTURMILL INDEXABLE MILLING CUTTER

CARBOLOY 6" FACE MILL ZP15L 0608-R3 2" ARBOR FUTURMILL INDEXABLE MILLING CUTTER

  • Sacramento, California, United States
  • Jun 9th

People who viewed this item also vieved

SUTTON 9/16" ROUND SERRATED #22 COLLET

SUTTON 9/16" ROUND SERRATED #22 COLLET

  • Fox Lake, Illinois, United States
  • Jan 30th
SUTTON 13/16" ROUND SERRATED #22 COLLET

SUTTON 13/16" ROUND SERRATED #22 COLLET

  • Fox Lake, Illinois, United States
  • Jan 30th
HARDINGE 15/16" ROUND SERRATED #22 COLLET

HARDINGE 15/16" ROUND SERRATED #22 COLLET

  • Fox Lake, Illinois, United States
  • Jan 30th
DELTA ROCKWELL 17" DRILL PRESS QUILL SPINDLE ASSY WITH #2 MORSE TAPER

DELTA ROCKWELL 17" DRILL PRESS QUILL SPINDLE ASSY WITH #2 MORSE TAPER

  • Cheswick, Pennsylvania, United States
  • Jan 30th
Dumore High Speed Sensitive Drill

Dumore High Speed Sensitive Drill

  • Berlin, Connecticut, United States
  • Jan 30th
Royel floating tapping head attachment 5/8" shank (0.625) like hardinge

Royel floating tapping head attachment 5/8" shank (0.625) like hardinge

  • Anoka, Minnesota, United States
  • Jan 30th
ANILAM DVL-200 142-21 COMMANDO MICROPROCESSOR CONTROL SYSTEM

ANILAM DVL-200 142-21 COMMANDO MICROPROCESSOR CONTROL SYSTEM

  • United States
  • Jan 30th
SET OF 2 ANILAM SUPER WIZARD 117-2 MICROPROCESSOR CONTROL SYSTEM UNIT

SET OF 2 ANILAM SUPER WIZARD 117-2 MICROPROCESSOR CONTROL SYSTEM UNIT

  • United States
  • Jan 30th
ANILAM DVL-200 COMMANDO MICROPROCESSOR CONTROL SYSTEM & PROGRAM SAVER CASSETTE

ANILAM DVL-200 COMMANDO MICROPROCESSOR CONTROL SYSTEM & PROGRAM SAVER CASSETTE

  • United States
  • Jan 30th
3 Ton 3" Strk Baileigh BP-3 HYDRAULIC PRESS, manually operated

3 Ton 3" Strk Baileigh BP-3 HYDRAULIC PRESS, manually operated

  • Harrison, New Jersey, United States
  • Jan 30th
10 Ton 4" Strk Baileigh BP-10E HYDRAULIC PRESS, 110v; 25" Thrt depth

10 Ton 4" Strk Baileigh BP-10E HYDRAULIC PRESS, 110v; 25" Thrt depth

  • Harrison, New Jersey, United States
  • Jan 30th
20 Ton 7" Strk Baileigh HSP-20A H-FRAME HYDRAULIC PRESS, pneumatic/manual operat

20 Ton 7" Strk Baileigh HSP-20A H-FRAME HYDRAULIC PRESS, pneumatic/manual operat

  • Harrison, New Jersey, United States
  • Jan 30th
Diamond Bore Finishing Tool HS38864 0.3449" x 3.00" 40/45 DBFT <1873>

Diamond Bore Finishing Tool HS38864 0.3449" x 3.00" 40/45 DBFT <1873>

  • Saint Louis, Missouri, United States
  • Jan 30th
MADISON FAESSLER MICRO ROLLER 5100 SERIES BURNISHING TOOL TYPE JNS 6-562 V

MADISON FAESSLER MICRO ROLLER 5100 SERIES BURNISHING TOOL TYPE JNS 6-562 V

  • Fort Myers, Florida, United States
  • Jan 30th
370A Air pencil grinding tool High speed 70000RPM and high precision 0.01mm(D)

370A Air pencil grinding tool High speed 70000RPM and high precision 0.01mm(D)

  • shenzhen, China
  • Jan 30th
Cylindrical Grinder Faceplate/Backplate

Cylindrical Grinder Faceplate/Backplate

  • Unionville, Pennsylvania, United States
  • Jan 30th
milwaukee die grinder , burr grinder tool pencil grinder NEW OUT OF BOX

milwaukee die grinder , burr grinder tool pencil grinder NEW OUT OF BOX

  • Paramus, New Jersey, United States
  • Jan 30th
PEAR MODEL 2/Zn1958 BENCH TOP UNIVERSAL GRINDER 3&#034; CONE WHEEL

PEAR MODEL 2/Zn1958 BENCH TOP UNIVERSAL GRINDER 3" CONE WHEEL

  • La Puente, California, United States
  • Jan 30th
14&#034;/19&#034;x 40&#034; Nardini Gap Bed Engine Lathe No. MS-1440E, Inch/mm, Taper (25846)

14"/19"x 40" Nardini Gap Bed Engine Lathe No. MS-1440E, Inch/mm, Taper (25846)

  • Cincinnati, Ohio, United States
  • Jan 30th
cylindrical grinder teil stock Center tool Morse taper No5 NMR-Y5

cylindrical grinder teil stock Center tool Morse taper No5 NMR-Y5

  • TOKYO, Japan
  • Jan 30th
Hardinge Cross Slide Tool Holders D-9

Hardinge Cross Slide Tool Holders D-9

  • Rochester, New York, United States
  • Jan 30th
Chicago D &amp; K Hydraulic Shear, Year 1974

Chicago D & K Hydraulic Shear, Year 1974

  • Watertown, Connecticut, United States
  • Jan 30th
Very Nice Rockwell Wood Shaper 115/230 Volt

Very Nice Rockwell Wood Shaper 115/230 Volt

  • United States
  • Jan 30th
Fosdick Cincinnati Twin spindle Drill Press Heavy Duty

Fosdick Cincinnati Twin spindle Drill Press Heavy Duty

  • Sioux Falls, South Dakota, United States
  • Jan 30th
16? X 11? AMADA #HK400 SEMI AUTOMATIC HORIZONTAL BAND SAW W/MITER CUTTING

16? X 11? AMADA #HK400 SEMI AUTOMATIC HORIZONTAL BAND SAW W/MITER CUTTING

  • Watertown, Connecticut, United States
  • Jan 30th
DoAll 1&#034; x 144&#034; 3 Phase Horizontal Band Saw C-67

DoAll 1" x 144" 3 Phase Horizontal Band Saw C-67

  • Glassboro, New Jersey, United States
  • Jan 30th
1997 Marvel MV460 APC Tilt Frame Fully Auto Vertical Band Saw 18&#034; Throat 20&#034;H

1997 Marvel MV460 APC Tilt Frame Fully Auto Vertical Band Saw 18" Throat 20"H

  • San Leandro, California, United States
  • Jan 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies