keo cutter for sale, brand-new and used.

Click Here. Double your traffic. Get Vendio Gallery - Now FREE!

Click Here. Double your traffic. Get Vendio Gallery - Now FREE!

This is a KEO #13 Keyseat Cutter. The size is 1" X 3/16" with a shank of 1/2". When measured the cutter diameter is actually a bit bigger by about 20 thousands.

This appears to be an ABER Woodruff Keyseat Cutter. Engraved on the shank is : "Aber Cutter #7 HSS." I cannot find an ABER cutter that fits that description, but it looks more like anWoodruff Cutter than anything else. The nominal cutter diameter is 3/4".

This is a slightly USED 3/4" Shank Fly Cutter set. It includes 3 cutter that are 2-1/2", 2", 1-1/2", and the wooden stand. The 1-1/2" is the only cutter in the set that has been used, and the wear can be seen in the pictures.

LISTING IS FOR A USED 3-FLUTE COUNTERSINK

To model 405 high-speed key seat cutter. Ten teeth, head diameter 5/8ths. Milling cutter

Tool lot. 

KEYWAY WOODRUFF KEYSEAT CUTTERS MACHINIST LOT OF 15 CUTTER HERE IS WHAT YOU GET CLEVLENAD #609 MODIFIED 1/2" SHANK CLEVLENAD #806 1/2" SHANK YUGOSLAVIA #1210 1/2" SHANK CLEVELAND #152 1/2" SHANK CLEVELAND #810 1/2" SHANK UNION #1212 1/2" SHANK UNION #609 MODIFIED 1/2" SHANK KEO #605 1/2" S

SpecsCombination Drill & Countersinks; Trade Size: #5/0; Body Diameter (Inch): 1/8; Drill Point Diameter (Decimal Inch): 0.0100; Drill Point Length (Decimal Inch): 0.0680; Overall Length (Inch): 1-1/4; Included Angle: 60

This is a new KEO countersink. It is a 1" x 82 degree cutter with 6 flutes with a 1/2" shank. So much better than the imports, will cut on all flutes.

WOODRUFF KSC KEYSEAT CUTTER SHANK HSS RH STR KEO 1008 GOOD LUCK SHIPPING & HANDLING USA

Lot # 20.....(1) Keo HS 607, (1) Niagara Cutter B555 3/4 '' x 1/4 ''. Good used Tools. Please see all photos for condition and content.

KEO 5/8" x 3/32" Keyseat Cutter...1/2" shank...Nice condition

KEO 808 High Speed Key Seat Cutter Standard Description

For sale we have one unused Carbide Tipped Stagger Tooth Cutter 1-1/4" x 7/32 #357100R.30

I picked these up in an estate sale and have no machinist experience and no need for these. Please look at photos carefully. Some appear new, some appear used, some appear to be modified, two appear to be in original boxes.

You are bidding on ( 1 ) new KEO, 62105, #1210, 3/8" x 1 1/4", HSS, Tin, Woodruff / Keyseat Cutter P/N 62105 Cutting Width - 3/8" Cutting Dia. - 1 1/4" Shank Dia. - 1/2" OAL - 2 3/8" No.

1. 45 degree x 1" x .5 shank2. 1/8x1/2 corner rounding mill3.

Brand new. The red on the cutter is from the box, no rust! Stored indoors since they were purchased, never used.