keo cutting tools catalog for sale, brand-new and used.

This is a 8 piece metric over and under HSS chucking reamer set from 3mm to 6mm. The over and under sizes are for a 3mm, 4mm, 5mm and 6mm straight flute, straight shank chucking reamers and they are all made by a USA Manufacturer. They will all be .001" over or under sized.

If you never heard of InSize Inspection Tools......you will! They have a complete line of inspection tools made in their own manufacturing facility in China. Made to the highest of specifications, they not only carry a one year warranty against defects, but each tool comes with a certificate of accuracy and is supplied in a fitted plastic storage case.

We are selling this drill as used.......but it is NEW! It is a 1-3/8" Taper Length Drill made by Precision Twist Drill and sells new for over $150.00! A taper length drill is a straight shank drill that is basically the same overall length of a taper shank drill.

This is a new 21/32 straight shank 4-flute core drill. It is USA Made by National Twist Drill and is 9" OAL and has 5" LOC. We are selling these below IMPORT Prices!

This is a USED DoAll Model 2013-V Vertical Bandsaw and it is in EXCELLENT condition! It has a 26"x26" table, 13" work height, 20" throat depth, 2-speed from 55 to 5200 and weights appro. 1250 pounds.

This is Starrett's Import Global Series 1202 Dial Caliper. They provide quick, accurate measurements of O.D., I.D. and depth, with sharp and clear dial graduations.

This is a USED Mitutoyo 0-12" Height Master and it is in it's original box, with the original instruction manual. The overall height of the unit is 16.8" and the base diameter is 5.8", with a head diameter of 4.6". This is not a small unit, it weighs almost 50 pounds!

This is a USED Renishaw Tool Setting Arm for a CNC Lathe. It is a Model HPA and the vertical arm coming up from the base is approximately 12" high and then the arm holding the probe is about 16" long. These are available several different ways from Renishaw, with different arm lengths and probes, but the base price is around $3500 to $4000, so should be a great buy for someone!

This is a USED Mitutoyo 35-Piece Inch Rectangular Gage Block Set in like-new Condition, in the original box. The set typically comes with two .100 wear blocks, but one of those is missing. Other than that, the set is complete.

This is a NEW Mitutoyo 10mm Travel Dial Indicator that features a lug back, 0.01mm graduations and is jeweled. It is in its original box with a short form certification and features a metric type yellow face. The part number is 2047-11 and the current part number is 2047S-11 and it is a little unique whereas it is made in the USA.

This is a NEW Mitutoyo 2" Travel Dial Indicator that features a flat back and .001" graduations. It is in its original box with a short form certification and features a standard white face. The part number is 2424FB-10 and the current part number is 2424SB-19.

This is a NEW Mitutoyo 1/2" Travel Dial Indicator that features a lug back, .001" graduations and is jeweled. It is in its original box with a short form certification and features a light green anti-glare face. The part number is 2918F-10 and the current part number is 2918S-10.

This is a NEW Mitutoyo 0-2" Series 3 Dial Indicator. With its 2-3/4" face and .001" graduations, it makes reading it very clear and easy! It has a lug back, but also has a 3/8" top stem for an additional holding feature.

This is a gently USED Federal Transfer Stand, Model #2300. It has a fine adjustment at the base, three-point base pads for accuracy, & has a contour shape to facilitate movement. Its shows hardly any sign of wear.

This is a USED Fowler 5"x2" Sine bar in the original box. Fowler Sine Bar equipment used with gage blocks is highly recommended for securing a high degree of accuracy in measuring angles for grinder and milling machine set ups. Both sine and rolls hardened and ground for extreme accuracy.

This is a USED Suburban Magnetic Sine Plate. The model number marked on the plate itself is MSP-664. The table measures 6"x6", and it is 4" high.

This is a USED Brown & Sharpe Combination Square Set. It includes a 18"-4R graduations blade(#599-9400-1804-1) & the Hardened Square Head(#599-9402-1009). The square head shows some signs of wear(shown in the pictures), but still is level.

This is a USED Brown & Sharpe 4-piece combination square set. It includes the 12" 4R blade (#599-9400-1204) , the Center-Head (#599-9400-2009), the Protractor Head (#599-9425-3009-1), and the Square-Head (#599-9402-1109). Everything is in full working condition.

This is a USED Lufkin 6" steel rule with 4R graduations (8ths, 16ths, 32nds, and 64ths) and the center head. The blade and head are original Lufkin products that were made in the USA! Sales Tax will be charged for shipments within OHIO unles

This is a USED Import Demagnetizer. The dimensions are 6.750" long X 4.500" wide X 3.250" high. These demagnetize dies, punches, cutters, or any tool that have become magnetized and will fit on it's surface.