keo cutting tools catalog for sale, brand-new and used.

This is a USED Jacobs 14N Super-Ball Bearing drill chuck with a capacity from zero to 1/2". This is a original USA Made Jacobs. Jacobs has now started making these in China, and the only way to get the original USA Made models is by hunting them out and finding them used.

This is a USED 4-1/2"x4-1/2" heavy-duty turret tool post. This toolpost can be used on lathes with a swing of 13" to 20". There is no brand name the post.

This is a USED Starrett No.278 1"(25mm) capacity V-Block set. Each block is 1-1/4" square and 1-5/8" long. These are precision ground to extreme accuracy.

This is a USED Albrecht 1/8" to 5/8" 6 Jacobs taper Classic Keyless Drill chuck made in Germany! The chuck turns smoothly like new and the jaws show no sign of wear. Currently these chucks are selling new for $420.00.

This is a USED Albrecht 0-3/8" model number 100-J33 Classic Keyless drill chuck. Included is a 5/8" straight shank arbor. The scroll moves very smooth, almost like new!, & the jaws close down very tight.

This is a USED 3-1/2" Boring Head with a R8 integral shank. This head will hold 3/4" shank boring bars. There are no marking on the head so we cannot identify the brand name.

This is a USED Heavy-Duty 4" Cam Action Drill Press Vise. It shows signs of wear, but slides like new! The jaws are 4" wide, it has a 4-1/4" opening, & the jaw depth is 1-3/8".

This is a USED Hermann Schmidt precision grinding vise in the original wooden case! There is a small mark that you can see in the pictures. New this vise is $825.00.

These "ARE NOT" your normal lifting straps! They were made for the military in a army green and are labeled "Projectile Lifting Straps". The laminated instructions show them lifting loads of military shells!

This is a USED George Scherr Company 10-Piece Rectangular steel gage block set in the case that also includes a 1" round check block. The round block must have been misplaced over time and replaced with the Brown & Sharpe equivalent that is now in the set. The rectangular blocks included are 2", 1", .500", .300", .250", .200", .125", .100", and .0625".

This is a USED 1-5/8"x6"x6"x8" Precision Steel Angle Plate with a wood storage box. There are 121 3/8"-16 tapped holes on the face, and the holes on the sides are tapped 1/4"-20. This is a very, very unique angle plate with all these holes and the plate is hardened!

This is a pair of stepped groove V-blocks that includes the 2 blocks, 1 clamp, and 2 step blocks for the V. The dimensions measure 2-1/2" long, 2-3/4" wide, and 2" high. The are also 5/16-18 tapped holes on the ends and the bottom of each block.

This is a slightly USED 3/4" Shank Fly Cutter set. It includes 3 cutter that are 2-1/2", 2", 1-1/2", and the wooden stand. The 1-1/2" is the only cutter in the set that has been used, and the wear can be seen in the pictures.

This is a full box of 2000 Marson Aluminum Pop Rivets, Marsons part number AB8-4A. The diameter of the body is 1/8", the grip range is .062"-.250", the head diameter is .500", the head height is .080", and it is a button-head style rivet. Sales Tax will be charged for shipments within OHIO unless Buyer has established account with T&S Tool & Supply or has a tax exempt form on file with us.

This is a BRAND NEW set of 3 flat-end chuck jaws for a Suga 8" chuck. The serrations are 1.5mm x 60?. They are made of steel and the dimensions are as follows: G: .551" E: 10mm D: 1.181" J: 1.970" C: 1.500" B: 3.750" A: 4.000"

This is a set of 4 T-slot Table Face Plate Jaws, USA made by Skinner Chuck Company of Connecticut. Here are some of the specifications on the individual jaws;5" Jaw Length1-3/8" Jaw Width 2-3/8" Serrated Jaw Face Height 5-1/8" Total Height on each assembly to top of Jaw1-1/4" Bottom T-Slot Width7-7/8" appro. center hole distance13/16" hole diameter9-5/8" overall len

This is a USED Mitutoyo #186-901 25-piece radius gage set with the holder. The set ranges from 1/64" to 17/64" in 64th increments, and 9/32" to 1/2" by 32nd increments. The set also includes the 4" long holder to make it possible to check radii in confined or hard-to-reach locations.

This is a USED Starrett 167C 25-piece stainless steel radius gage set that includes the holder. The set ranges from 1/64" to 1/2" . This set is in good shape and would be a great but for anybody!

This is a 10" Independent 4-Jaw Lathe Chuck that has a type LOO back that is 3-3/4"-6 thread. We are selling it as a used chuck, but we took it in on trade several years ago for a 3-Jaw Chuck, so it is literally just shelve worn and we do not think it has ever been mounted on a lathe! It has a tag on it that is marked ELLIOT, Semi-Steel and each jaw is marked 1, 2, 3 and 4.