keo cutting tools for sale, brand-new and used.

This is a USED Suburban Magnetic Sine Plate. The model number marked on the plate itself is MSP-664. The table measures 6"x6", and it is 4" high.

This is a USED Brown & Sharpe Combination Square Set. It includes a 18"-4R graduations blade(#599-9400-1804-1) & the Hardened Square Head(#599-9402-1009). The square head shows some signs of wear(shown in the pictures), but still is level.

This is a USED Brown & Sharpe 4-piece combination square set. It includes the 12" 4R blade (#599-9400-1204) , the Center-Head (#599-9400-2009), the Protractor Head (#599-9425-3009-1), and the Square-Head (#599-9402-1109). Everything is in full working condition.

This is a USED Lufkin 6" steel rule with 4R graduations (8ths, 16ths, 32nds, and 64ths) and the center head. The blade and head are original Lufkin products that were made in the USA! Sales Tax will be charged for shipments within OHIO unles

This is a USED Import Demagnetizer. The dimensions are 6.750" long X 4.500" wide X 3.250" high. These demagnetize dies, punches, cutters, or any tool that have become magnetized and will fit on it's surface.

This is a USED Jacobs 14N Super-Ball Bearing drill chuck with a capacity from zero to 1/2". This is a original USA Made Jacobs. Jacobs has now started making these in China, and the only way to get the original USA Made models is by hunting them out and finding them used.

This is a USED 4-1/2"x4-1/2" heavy-duty turret tool post. This toolpost can be used on lathes with a swing of 13" to 20". There is no brand name the post.

This is a USED Starrett No.278 1"(25mm) capacity V-Block set. Each block is 1-1/4" square and 1-5/8" long. These are precision ground to extreme accuracy.

This is a USED Albrecht 1/8" to 5/8" 6 Jacobs taper Classic Keyless Drill chuck made in Germany! The chuck turns smoothly like new and the jaws show no sign of wear. Currently these chucks are selling new for $420.00.

This is a USED Albrecht 0-3/8" model number 100-J33 Classic Keyless drill chuck. Included is a 5/8" straight shank arbor. The scroll moves very smooth, almost like new!, & the jaws close down very tight.

This is a USED 3-1/2" Boring Head with a R8 integral shank. This head will hold 3/4" shank boring bars. There are no marking on the head so we cannot identify the brand name.

This is a USED Heavy-Duty 4" Cam Action Drill Press Vise. It shows signs of wear, but slides like new! The jaws are 4" wide, it has a 4-1/4" opening, & the jaw depth is 1-3/8".

This is a USED Hermann Schmidt precision grinding vise in the original wooden case! There is a small mark that you can see in the pictures. New this vise is $825.00.

These "ARE NOT" your normal lifting straps! They were made for the military in a army green and are labeled "Projectile Lifting Straps". The laminated instructions show them lifting loads of military shells!

This is a USED George Scherr Company 10-Piece Rectangular steel gage block set in the case that also includes a 1" round check block. The round block must have been misplaced over time and replaced with the Brown & Sharpe equivalent that is now in the set. The rectangular blocks included are 2", 1", .500", .300", .250", .200", .125", .100", and .0625".

This is a USED 1-5/8"x6"x6"x8" Precision Steel Angle Plate with a wood storage box. There are 121 3/8"-16 tapped holes on the face, and the holes on the sides are tapped 1/4"-20. This is a very, very unique angle plate with all these holes and the plate is hardened!

This is a pair of stepped groove V-blocks that includes the 2 blocks, 1 clamp, and 2 step blocks for the V. The dimensions measure 2-1/2" long, 2-3/4" wide, and 2" high. The are also 5/16-18 tapped holes on the ends and the bottom of each block.

This is a slightly USED 3/4" Shank Fly Cutter set. It includes 3 cutter that are 2-1/2", 2", 1-1/2", and the wooden stand. The 1-1/2" is the only cutter in the set that has been used, and the wear can be seen in the pictures.

This is a full box of 2000 Marson Aluminum Pop Rivets, Marsons part number AB8-4A. The diameter of the body is 1/8", the grip range is .062"-.250", the head diameter is .500", the head height is .080", and it is a button-head style rivet. Sales Tax will be charged for shipments within OHIO unless Buyer has established account with T&S Tool & Supply or has a tax exempt form on file with us.

This is a BRAND NEW set of 3 flat-end chuck jaws for a Suga 8" chuck. The serrations are 1.5mm x 60?. They are made of steel and the dimensions are as follows: G: .551" E: 10mm D: 1.181" J: 1.970" C: 1.500" B: 3.750" A: 4.000"