+ Post new Ad
Kurt AngleLock® D688 6" x 8.8" Vise NEW USA #1, US $589.75 – Picture 0
Kurt AngleLock® D688 6" x 8.8" Vise NEW USA #1, US $589.75 – Picture 0

Kurt Anglelock® D688 6" X 8.8" Vise New Usa #1

US $589.75

  • Columbus, Ohio, United States
  • Jan 30th
Open on mobile:
QR code
KURT D688 Precision Machine Vise Jaw Width 6" Kurt ANgleLock® D688 6" x 8.8" Vise Features: New Large 8.8 inch jaw opening. Outside rail edges of the body are machined. Vise nut does not extend beyond the end of the vise body. D688 has the same footprint as the D675 vise. Distance from keyway to stationary same as D675. Groove Lock jaw (D60-315) and workstop (WSRL46) standard. Patented "O"ring pull down feature standard. Approximately a 20% increase in clamping pressure over D675 vise. Distinctive patented design of the "Kurt Look". Patented AngLock design. Bed height matched to size 2.875" (73.025 mm) ±.0005". Repeatability within .001". Sealed needle thrust bearing used at hex end of screw to reduce clamping friction. Machined edge of D688 vise allows precision alignment of vise when used on angle plate with sine bar for locating . $70.00 Shipping Inside Continental 48 United States. Alaska & Hawaii & International buyers pay priority cost. We require a physical address on all items Sorry NO P.O. Box. 575 N. Hague Ave Columbus, Ohio 43204 Phone # 1-800-543-5998 After purchasing, pay instantly with your credit card through PayPal!
Condition:
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...
Manufacturer Kurt

Directions

Similar products from Grips & Tongs

VTG MORGAN No. 25 SWIVEL BENCH VISE 4 1/2 INCH JAW Pipe Jaws

VTG MORGAN No. 25 SWIVEL BENCH VISE 4 1/2 INCH JAW Pipe Jaws

  • Flatwoods, Kentucky, United States
  • Jan 30th
Schunk Vise KSP Plus 64 Tandem Part# 0405100 Brand New

Schunk Vise KSP Plus 64 Tandem Part# 0405100 Brand New

  • Woodstock, Vermont, United States
  • Jan 30th
Bison MT#4 NC Quad-Bearing Live Lathe Center-.0002 TIR

Bison MT#4 NC Quad-Bearing Live Lathe Center-.0002 TIR

  • Hamden, Connecticut, United States
  • Jan 30th
6" MILLING MILL MACHINE VISE (NO JAWS) - 4-3/4" MAX. CAPACITY

6" MILLING MILL MACHINE VISE (NO JAWS) - 4-3/4" MAX. CAPACITY

  • Chino, California, United States
  • Jan 30th
wilton swivel 3 1/2 inch bullet vise

wilton swivel 3 1/2 inch bullet vise

  • Flanders, New Jersey, United States
  • Jan 30th
3" SWIVEL HEAVY DUTY BASE BENCH VISE (without jaws) IN GOOD WORKING CONDITION

3" SWIVEL HEAVY DUTY BASE BENCH VISE (without jaws) IN GOOD WORKING CONDITION

  • La Mesa, California, United States
  • Jan 30th
Shop Fox D2933 Angle Vise New

Shop Fox D2933 Angle Vise New

  • United States
  • Jan 30th
ACCURA VERTEX AMVW-303 3" TILTING ANGLE VISE-SWEET SHOP ASSISTANT

ACCURA VERTEX AMVW-303 3" TILTING ANGLE VISE-SWEET SHOP ASSISTANT

  • Beaver Falls, Pennsylvania, United States
  • Jan 30th
ENGINEER INC. Pin Vise TP-20 Fitting to Electric Driver Brand New from Japan

ENGINEER INC. Pin Vise TP-20 Fitting to Electric Driver Brand New from Japan

  • Osaka, Japan
  • Jan 30th
WILTON 63201 1765 6-1/2" Swivel Bench & Pipe Combination Vise PA

WILTON 63201 1765 6-1/2" Swivel Bench & Pipe Combination Vise PA

  • Saint Louis, Missouri, United States
  • Jan 30th
TTC Aluminum Soft Jaws - Model .: Z1194

TTC Aluminum Soft Jaws - Model .: Z1194

  • Flushing, New York, United States
  • Jan 30th
Kurt EZ-Lock jaws 6"

Kurt EZ-Lock jaws 6"

  • North Kingstown, Rhode Island, United States
  • Jan 30th
PALMGREN, 9611405, 4" Industrial Angle Vise, 0- 90° Angles, Square Jaws, /KT3/

PALMGREN, 9611405, 4" Industrial Angle Vise, 0- 90° Angles, Square Jaws, /KT3/

  • Saint Louis, Missouri, United States
  • Jan 30th
CARDINAL 4B SPEED VISE 4" QUICK GRIP DRILL PRESS VISE QUICK RELEASE

CARDINAL 4B SPEED VISE 4" QUICK GRIP DRILL PRESS VISE QUICK RELEASE

  • Jamestown, New York, United States
  • Jan 30th
Starrett Toolmakers Clamp Set Of 2 No. 161-A

Starrett Toolmakers Clamp Set Of 2 No. 161-A

  • Hoffman Estates, Illinois, United States
  • Jan 30th
2" SHOP MADE MACHINIST VISE

2" SHOP MADE MACHINIST VISE

  • Covina, California, United States
  • Jan 30th
2-1/4'' MACHINIST / DRILL PRESS VISE

2-1/4'' MACHINIST / DRILL PRESS VISE

  • Covina, California, United States
  • Jan 30th
Wilton Model 835 Bullet Machinist Vise Stationary Base 3.5" Jaws

Wilton Model 835 Bullet Machinist Vise Stationary Base 3.5" Jaws

  • Highland, Indiana, United States
  • Jan 30th
NICE!! KURT ANG-LOCK 6" MILLING MACHINE VISE - D675

NICE!! KURT ANG-LOCK 6" MILLING MACHINE VISE - D675

  • Norwalk, California, United States
  • Jan 30th
Chas Parker 974B Bench Vise (Inv.32008)

Chas Parker 974B Bench Vise (Inv.32008)

  • Portland, Connecticut, United States
  • Jan 30th

People who viewed this item also vieved

PARLEC NUMERTAP 7711 - 062 5/8 INCH TAP COLLET CNC MILL BRIDGEPORT MACHINE SHOP

PARLEC NUMERTAP 7711 - 062 5/8 INCH TAP COLLET CNC MILL BRIDGEPORT MACHINE SHOP

  • Xenia, Ohio, United States
  • May 26th
5C collets with rack

5C collets with rack

  • Hoffman Estates, Illinois, United States
  • May 26th
5C Square Collets, R8 collets & extras

5C Square Collets, R8 collets & extras

  • Oceanside, California, United States
  • May 26th
12 ton Hydraulic PRESS PLATES, .75"X 2.500X10.000 BED BARS

12 ton Hydraulic PRESS PLATES, .75"X 2.500X10.000 BED BARS

  • Kalamazoo, Michigan, United States
  • May 26th
Machine tool pallet 600mm x 400mm t-slotted

Machine tool pallet 600mm x 400mm t-slotted

  • Dayton, Ohio, United States
  • May 26th
Vimtage D.C. Morrison Tilting Table **Hard To Find!**

Vimtage D.C. Morrison Tilting Table **Hard To Find!**

  • Garden City, Idaho, United States
  • May 26th
Carr Lane CL-650-VTC Toggle Clamp

Carr Lane CL-650-VTC Toggle Clamp

  • Croydon, Pennsylvania, United States
  • May 27th
2 NEW 1000LB CARR LANE 650-HTC HORIZONTAL WORK HOLDER MACHINE TOGGLE HAND CLAMPS

2 NEW 1000LB CARR LANE 650-HTC HORIZONTAL WORK HOLDER MACHINE TOGGLE HAND CLAMPS

  • Long Beach, California, United States
  • May 27th
Grizzly 3400-3501 Clamping Kit for 1/2-Inch T-slots, 58-Piece New

Grizzly 3400-3501 Clamping Kit for 1/2-Inch T-slots, 58-Piece New

  • Los Angeles, California, United States
  • May 27th
NEW SET OF 3 RAM STYLE STEEL JAWS 3 1/2" X 1 1/2" X 3 1/2" FOR CHUCK 454-35 8351

NEW SET OF 3 RAM STYLE STEEL JAWS 3 1/2" X 1 1/2" X 3 1/2" FOR CHUCK 454-35 8351

  • Oxnard, California, United States
  • May 28th
New Surplus Ajax 6 1/2" ASM 181 Manual Lathe Chuck Jaw Tool Soft Jaws Machining

New Surplus Ajax 6 1/2" ASM 181 Manual Lathe Chuck Jaw Tool Soft Jaws Machining

  • Oxnard, California, United States
  • May 28th
NEW SET OF 3 RAM PRODUCTS COATED STEEL CHUCK JAWS 454-40 4 3/4" X 1 3/4" X 3 3/4

NEW SET OF 3 RAM PRODUCTS COATED STEEL CHUCK JAWS 454-40 4 3/4" X 1 3/4" X 3 3/4

  • Oxnard, California, United States
  • May 28th
UNIMAT SL1000 / DB200 LATHE SET OF (2) DEAD CENTERS

UNIMAT SL1000 / DB200 LATHE SET OF (2) DEAD CENTERS

  • Hatboro, Pennsylvania, United States
  • May 29th
ATLAS 618 CRAFTSMAN 6" LATHE READY MT1 LIVE CENTER (TANG SHAVED)

ATLAS 618 CRAFTSMAN 6" LATHE READY MT1 LIVE CENTER (TANG SHAVED)

  • Hatboro, Pennsylvania, United States
  • May 29th
ATLAS 10" CRAFTSMAN 12" LATHE 60 DEGREE MT2 DEAD CENTER IN ORIGINAL BOX

ATLAS 10" CRAFTSMAN 12" LATHE 60 DEGREE MT2 DEAD CENTER IN ORIGINAL BOX

  • Hatboro, Pennsylvania, United States
  • May 29th
CRANE 2-1/2 CAP *NEW OUT OF BOX*

CRANE 2-1/2 CAP *NEW OUT OF BOX*

  • Camarillo, California, United States
  • Jun 5th
19-1/2" x 47" Cast Iron Welding / Layout Table, Off Matsuura MC-1000V VMC, (2)

19-1/2" x 47" Cast Iron Welding / Layout Table, Off Matsuura MC-1000V VMC, (2)

  • Grand Rapids, Michigan, United States
  • Jun 5th
18" x 46" Cast Iron Welding / Layout Table, Off Matsuura MC-800VDC VMC, 1991 (3)

18" x 46" Cast Iron Welding / Layout Table, Off Matsuura MC-800VDC VMC, 1991 (3)

  • Grand Rapids, Michigan, United States
  • Jun 5th
Haas Servo Control

Haas Servo Control

  • New Bedford, Massachusetts, United States
  • Jun 9th
19 1/2" diameter German Rotary table

19 1/2" diameter German Rotary table

  • Saugus, Massachusetts, United States
  • Jun 9th
Haas Hrt 310

Haas Hrt 310

  • Nampa, Idaho, United States
  • Jun 9th
BROWN & SHARPE MODEL NO. 750B V-BLOCK 1-9/16" V CAPACITY W/ CLAMP

BROWN & SHARPE MODEL NO. 750B V-BLOCK 1-9/16" V CAPACITY W/ CLAMP

  • Ellington, New York, United States
  • Jun 9th
Machinists Tools: V-Block,1-2-3 Blocks, Machinist Jack and More Mill Lathe

Machinists Tools: V-Block,1-2-3 Blocks, Machinist Jack and More Mill Lathe

  • Dallas, Texas, United States
  • Jun 9th
STARRETT V BLOCK & CLAMP No. 278

STARRETT V BLOCK & CLAMP No. 278

  • Tallmadge, Ohio, United States
  • Jun 9th
"Penny Black Clear Stamps 5""X7""-Joy To All"

"Penny Black Clear Stamps 5""X7""-Joy To All"

  • Hickory Hills, Illinois, United States
  • Jun 12th
Spellbinders Shapeabilities Die D-Lites-Time Flies

Spellbinders Shapeabilities Die D-Lites-Time Flies

  • Hickory Hills, Illinois, United States
  • Jun 12th
Cubics Interchangeable Needles-Size 11/8mm

Cubics Interchangeable Needles-Size 11/8mm

  • Hickory Hills, Illinois, United States
  • Jun 12th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies