+ Post new Ad
Kurt D675 AngLock Machine Vise ----One Hard Jaw--- Vise Handle, US $230 – Picture 0
Kurt D675 AngLock Machine Vise ----One Hard Jaw--- Vise Handle, US $230 – Picture 0

Kurt D675 Anglock Machine Vise ----one Hard Jaw--- Vise Handle

US $230

  • Louisville, Kentucky, United States
  • Jun 11th
Open on mobile:
QR code
Kurt D675 AngLock Machine Vise with ONE HARD JAW, missing one hard jaw! Kurt 6” Wide  x 7.5" Opening  Model D675 The original Kurt AngLock "D" Series vises are designed for precision part clamping on basic machine tools such as knee-mills and machining centers. "D" Series vises are ideal for use in running production parts where datum's, flatness and parallelism is important. Manufacturer: Kurt Shipping Weight: 77 lbs Approx. Product Dimensions:  Width: 13.00   Length: 27.30  Height: 6.70 Large 7.5" jaw opening. Outside rail edges of the body are machined. Vise nut does not extend beyond the end of the vise body. Patented “O” ring pull down feature standard. Distinctive patented design of the “Kurt Look”. Patented AngLock design. Bed height matched to size 2.875" (73.025 mm) ±0.0005". Repeatability within 0.001". Sealed needle thrust bearing used at hex end of screw to reduce clamping friction. AngLock design assures the movable jaw does not lift. Hardened vise bed. Hardened jaw plates. Semi-hard steel screw. 80,000-PSI ductile iron body. Shipping wt. 83 lbs. Hardened Vise Jaws Can be seen in our Downtown Louisville, Ky. 40203 Warehouse! glen at amerigo machinery dot com or 5024198183

Directions

Similar products from Grips & Tongs

Vintage WILTON VISE

Vintage WILTON VISE

  • Fallbrook, California, United States
  • Jun 11th
Kurt KPS-6000 Parallel Keeper Vise

Kurt KPS-6000 Parallel Keeper Vise

  • USA, United States
  • Jun 11th
360 Degree 3" Milling Vise for Atlas Shaper Mill Other

360 Degree 3" Milling Vise for Atlas Shaper Mill Other

  • Youngstown, Ohio, United States
  • Jun 11th
6'' mill Vise Precision Milling Drilling Machine Bench Clamp Clamping Vice

6'' mill Vise Precision Milling Drilling Machine Bench Clamp Clamping Vice

  • Hadley, Pennsylvania, United States
  • Jun 11th
precision ground toolmakers precision milling grinding vice 6x 2.5 x 2 7/16

precision ground toolmakers precision milling grinding vice 6x 2.5 x 2 7/16

  • Hadley, Pennsylvania, United States
  • Jun 11th
set of V-block Precision Blocks Grinding Milling Toolmaker matching clamp set

set of V-block Precision Blocks Grinding Milling Toolmaker matching clamp set

  • Hadley, Pennsylvania, United States
  • Jun 11th
Machinist V-block Precision Block Grinding Milling Toolmaker 2.5x2 3/4x1 3/4

Machinist V-block Precision Block Grinding Milling Toolmaker 2.5x2 3/4x1 3/4

  • Hadley, Pennsylvania, United States
  • Jun 11th
4x4x2" PRECISION ANGLE SINE PLATE

4x4x2" PRECISION ANGLE SINE PLATE

  • Hadley, Pennsylvania, United States
  • Jun 11th
Machinist V-block Precision Block Precision Grinding Milling Toolmaker 2.5x2.5x3

Machinist V-block Precision Block Precision Grinding Milling Toolmaker 2.5x2.5x3

  • Hadley, Pennsylvania, United States
  • Jun 11th
Kurt D675 AngLock Machine Vise ----Hard Jaws--- Vise Handle

Kurt D675 AngLock Machine Vise ----Hard Jaws--- Vise Handle

  • Louisville, Kentucky, United States
  • Jun 11th
Vintage Wilton 2" Bullet Bench Top Vise Very Nice

Vintage Wilton 2" Bullet Bench Top Vise Very Nice

  • Pacoima, California, United States
  • Jun 11th
Vintage Early Wilton Bullet Vise 5" Bench Swivel Base Vise Chicago USA RARE???

Vintage Early Wilton Bullet Vise 5" Bench Swivel Base Vise Chicago USA RARE???

  • Ashton, Illinois, United States
  • Jun 11th
CUSTOM MADE MACHINIST VISE

CUSTOM MADE MACHINIST VISE

  • Suncook, New Hampshire, United States
  • Jun 11th
GENERAL NO. 815 HAND VISE

GENERAL NO. 815 HAND VISE

  • Saginaw, Michigan, United States
  • Jun 11th
1" X 4" LOC X 3 Flute HSS(3pcs.TOTAL) Roughing END MILL PERFECT FOR ALUMINUM

1" X 4" LOC X 3 Flute HSS(3pcs.TOTAL) Roughing END MILL PERFECT FOR ALUMINUM

  • Ventura, California, United States
  • Jun 11th
4" Solid Brass Sextant Nautical Maritime Astrolabe Marine Ships Instrument

4" Solid Brass Sextant Nautical Maritime Astrolabe Marine Ships Instrument

  • India, India
  • Jun 11th
4" Solid Brass Sextant Nautical Maritime Astrolabe Marine Ships Instrument A1

4" Solid Brass Sextant Nautical Maritime Astrolabe Marine Ships Instrument A1

  • India, India
  • Jun 11th
1 KURT 8" PT800A KURT II VISE

1 KURT 8" PT800A KURT II VISE

  • Monroe, North Carolina, United States
  • Jun 11th
Vintage Columbian D44-M3 Swivel Base 4" W/ Fixed Pipe Grip Anvil Bench Vise USA.

Vintage Columbian D44-M3 Swivel Base 4" W/ Fixed Pipe Grip Anvil Bench Vise USA.

  • Oakley, California, United States
  • Jun 11th
Heavy Duty Machinist's Drill Press Lathe; double slider; Weighs 27 pounds

Heavy Duty Machinist's Drill Press Lathe; double slider; Weighs 27 pounds

  • Des Moines, Iowa, United States
  • Jun 11th

People who viewed this item also vieved

Starrett 278 v-block

Starrett 278 v-block

  • Greeley, Colorado, United States
  • Jan 30th
Matched Cast Iron Vee Blocks (Inv.2614)

Matched Cast Iron Vee Blocks (Inv.2614)

  • Portland, Connecticut, United States
  • Jan 30th
Machinist 1 2 3 Block Set of 2 Nice condition o major scars

Machinist 1 2 3 Block Set of 2 Nice condition o major scars

  • Staunton, Virginia, United States
  • Jan 30th
RITEN LIVE CENTER 3MT #48603

RITEN LIVE CENTER 3MT #48603

  • Wadley, Alabama, United States
  • Jan 30th
NEW UNUSED MT1 WORK ARBOR TOOL HOLDER ATLAS CRAFTSMAN 6" 618 LATHE MORSE TAPER 1

NEW UNUSED MT1 WORK ARBOR TOOL HOLDER ATLAS CRAFTSMAN 6" 618 LATHE MORSE TAPER 1

  • Danville, New Hampshire, United States
  • Jan 30th
5c Hardinge Headstock Male Center (solid body)

5c Hardinge Headstock Male Center (solid body)

  • Rochester, New York, United States
  • Jan 30th
Cushmen Chuck Jaws (2) 1&4 Model#-8216C

Cushmen Chuck Jaws (2) 1&4 Model#-8216C

  • Brooksville, Florida, United States
  • Jan 30th
82" Over Size Bullard VTL Surface Face plate Chuck Vertical turret lathe table

82" Over Size Bullard VTL Surface Face plate Chuck Vertical turret lathe table

  • New Britain, Connecticut, United States
  • Jan 30th
Vintage Wolf Jahn Germany 6 Jaw Jeweler Watch Maker Lathe Chuck

Vintage Wolf Jahn Germany 6 Jaw Jeweler Watch Maker Lathe Chuck

  • Anderson, California, United States
  • Jan 30th
5000 psi 1-Phase Pump w/ Controls for SA Circuits - Enerpac Vektek Hytec

5000 psi 1-Phase Pump w/ Controls for SA Circuits - Enerpac Vektek Hytec

  • Lake Villa, Illinois, United States
  • Jan 30th
4" TE-CO Adjustable Toe Clamp Set

4" TE-CO Adjustable Toe Clamp Set

  • Miami Beach, Florida, United States
  • Jan 30th
Lot of 3 Micrometers: 2 Brown & Sharp & 1 Starrett

Lot of 3 Micrometers: 2 Brown & Sharp & 1 Starrett

  • Glastonbury, Connecticut, United States
  • Jan 30th
COMMAND C4C4-1000 CAT 40 COLLET HOLDER 14316-015

COMMAND C4C4-1000 CAT 40 COLLET HOLDER 14316-015

  • West Palm Beach, Florida, United States
  • Jan 30th
COMMAND C4C4-1000 CAT 40 COLLET HOLDER 14316-003

COMMAND C4C4-1000 CAT 40 COLLET HOLDER 14316-003

  • West Palm Beach, Florida, United States
  • Jan 30th
LAST ONE! USED BIG-DAISHOWA BT40 NBN-10 NEW BABY COLLET CHUCK BHDT-90018

LAST ONE! USED BIG-DAISHOWA BT40 NBN-10 NEW BABY COLLET CHUCK BHDT-90018

  • Fairfield, Iowa, United States
  • Jan 30th
Lathe 5C Collet Closer

Lathe 5C Collet Closer

  • Hallandale, Florida, United States
  • Jan 30th
COLLET #22 BALLAS 3/4 ROUND FOR AUTOMATICS & SCREW MACHINES #6582

COLLET #22 BALLAS 3/4 ROUND FOR AUTOMATICS & SCREW MACHINES #6582

  • Resaca, Georgia, United States
  • Jan 30th
ERICKSON 75TG0750 Collet

ERICKSON 75TG0750 Collet

  • Grand Ledge, Michigan, United States
  • Jan 30th
Vacuum Chuck Dunham 6"x12" W/ Vacuum Pump & Motor Works Great !!!

Vacuum Chuck Dunham 6"x12" W/ Vacuum Pump & Motor Works Great !!!

  • Providence, Rhode Island, United States
  • Jan 30th
V Blocks, (2) Brown & Sharpe No. 599-750-1 Matched Pair V Blocks, USA

V Blocks, (2) Brown & Sharpe No. 599-750-1 Matched Pair V Blocks, USA

  • Saunderstown, Rhode Island, United States
  • Jan 30th
Lot 2 Vintage Aluminum Machinist Toolmaker Jig Bore V Block Fixture Workholders

Lot 2 Vintage Aluminum Machinist Toolmaker Jig Bore V Block Fixture Workholders

  • Milford, Connecticut, United States
  • Jan 30th
Vlier, Spring Stop, SS92B, 2" x 2", new

Vlier, Spring Stop, SS92B, 2" x 2", new

  • Maryland Heights, Missouri, United States
  • Jan 30th
Hainbuch PP 100 Pneumatic PP type Changing Fixture

Hainbuch PP 100 Pneumatic PP type Changing Fixture

  • Middlebury, Indiana, United States
  • Jan 30th
1999 Escomatic NM 640 Coil Fed Swiss CNC Machine

1999 Escomatic NM 640 Coil Fed Swiss CNC Machine

  • KENGERI, KARNATAKA, India
  • Jan 30th
TANSHING ROTARY TABLE

TANSHING ROTARY TABLE

  • Seekonk, Massachusetts, United States
  • Jan 30th
NIKKEN CNC-321TF Rotary Table and Controller

NIKKEN CNC-321TF Rotary Table and Controller

  • Chatsworth, California, United States
  • Jan 30th
NIKKEN CNC-401T Rotary Table and Controller

NIKKEN CNC-401T Rotary Table and Controller

  • Chatsworth, California, United States
  • Jan 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies