3 ~ NEW 4” Lightweight Flexible Coupling with “E” Gasket for Grooved IPS Pipe This posting is for THREE (3) Flexible coupling (NOTE 1 ITEM = 3 COUPLINGS) All our fittings conform to the same dimensions to Victaulic & Gruvlok fittngs, see specs below.. Grooved Couplings as well as most other grooved fittings are general stock for us.
Used pipe taps,NPT lot Of 6,HSS, all taps in working condition. 3/4-14 MARKED ; VERMONT 1/2-1/4 NPT MARKED ; JAPAN 3/8-18 NPT MARKED ; MORSE 1/4-18 NPT MARKED ; O. K.
Used pipe taps,NPT lot Of 6,HSS, all taps in working condition. 1-11-1/2 MARKED CARD USA 3/4-14 MARKED ; HANSON WHITNEY 1/2-1/4 NPT MARKED ; VERMONT 3/8-18 NPT MARKED ; CARD USA 1/4-18 NPT MARKED ; CARD USA 1/8 NPT - MARKED,OSG
Used pipe taps,NPT lot Of 6,HSS, all taps in working condition. 1-11-1/2 MARKED VT-1 3/4-14 NPS MARKED ; NPS HANSON USA 1/2-1/4 NPT MARKED ; YUGOSLAVIA (NEW) 3/8-18 ANPT MARKED ; BTRFLD 1/4-18 NPT MARKED ; PILOT USA 1/8 NPT - MARKED,MORSE
FOR SALE - RUSCH MACHINE AND DESIGN MANDREL EXHAUST BENDER - SEMI AUTOMATED COMES WITH EXHUAST DYES FOR 2.25", 2.5", AND 3.0" EXHAUST PIPE( NOT STAINLESS) OTHER SIZES AND STAINLESS DYES AVAILABLE THROUGH RUSCH.
UP FOR BIDS IS A J.H. WILLIAMS & CO CHAIN PIPE VISE. I WAS TOLD AND ALSO DID SOME RESEARCH THAT THIS DEVICE WAS ONE OF THE FIRST TO COME OUT MAYBE 1899-1903 THE VISE SAYS J.H.
McElroy 1 1/2" Insert Set Part # 207515 (for a McElroy No.14, No.2LC or No.2CU) This insert set is made to work with a McElroy No.14, 2LC, and 2CU machine. All McElroy inserts are surface hardened for longer life and are serrated for maximum grip on the pipe. These inserts are made for one size pipe only and are required for pipe sizes less than 2" IPS.
McElroy 3" Insert Set Part # 410103 (for a McElroy No.14) This insert set is made to work with a McElroy No.14 machine. All McElroy inserts are surface hardened for longer life and are serrated for maximum grip on the pipe. These inserts are made for one size pipe only and are required for pipe sizes less than 4" DIPS.
McElroy 2" Master Insert Set Part # 410007 (for a McElroy No.14) This insert set is made to work with a McElroy No.14 machine. All McElroy inserts are surface hardened for longer life and are serrated for maximum grip on the pipe. These inserts are made for one size pipe only and are required for pipe sizes less than 4" DIPS.
McElroy's No.2LC No.2LC The No.2LC Machine will butt fuse 1/2" CTS to 2" IPS (16mm to 60mm) pipe. It employs a semi-automatic locking cam system to maintain force during the cooling cycle. The No.2LC incorporates McElroy's patented Centerline guidance system, and is designed to butt fuse tees, ells, and other fittings.
McElroy 3/4" Insert Set Part # 207512 (for a McElroy No.14, No.2LC or No.2CU) This insert set is made to work with a McElroy No.14, 2LC, and 2CU machine. All McElroy inserts are surface hardened for longer life and are serrated for maximum grip on the pipe. These inserts are made for one size pipe only and are required for pipe sizes less than 2" IPS.
Pipe Support Stands You are looking at a used set of pipe stands for a T630 or T900 McElroy machine. Pipe stands are ready to be used in the field. Please let me know if you have any questions.
McElroy's No.28 You are looking at a brand new McElroy No.28 Poly Welder. This is not an older model machine (The machine is part of the newest line of McElroy's fusion equipment). This machine is capable of fusing pipe sizes from 2" IPS to 8" DIPS (63mm to 225mm).
McElroy's TracStar No.618 You are looking at a brand new McElroy TracStar No.618. This is not an older model machine (The machine is part of the newest line of McElroy's fusion equipment). The machine package includes the machine, heater, facer, heater stand, and lifting device.
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.