Laser Equipment

The average price for current category was $2,121.33 last month.

There are 4495 ads in this category.

100mm x 10mm lens or mirror optical table kinematic holder Melles Griot

100mm x 10mm lens or mirror optical table kinematic holder melles griot

  • North York, Ontario, Canada
  • Jan 30th
100mm x 10mm lens or mirror optical table mountable holder Melles Griot Standard 1/4-20 mounting hold for optical table mounting. Shipping is $18.00 to Canada and the U.S., MORE overseas
Precision brass pinhole and holder Melles Griot

Precision brass pinhole and holder melles griot

  • North York, Ontario, Canada
  • Jan 30th
Precision brass pin hold and articulated holder. Standard 1/4-20 mounting hole in post bottom Shipping is $18.00 to Canada and the U.S., more overseas please email.
Optical Mirror & Motor Mounted on Gold Block w/Sensor pulled from Agema Thermal

Optical mirror & motor mounted on gold block w/sensor pulled from agema thermal

  • Columbia, South Carolina, United States
  • Jan 30th
So I got this from an older Agema Thermal Camera Setup, and it's a mirror about the size of a dime I guess, mounted on a thin pole with a motor below it and a sensor or laser behind it. Someone is bound to know what it is so I'll leave it at that. The mirror has only a couple of light hairline sized scratches from what I can tell, and if the unit ends up not working the buyer can return it.
NRC Newport Research 815 Benchtop Digital Lab Photodetector/Optical Power Meter

Nrc newport research 815 benchtop digital lab photodetector/optical power meter

  • Ridgefield, Connecticut, United States
  • Jan 30th
var itemNumber = window.ebayItemID ?
Pi M415.DG 150mm linear stage

Pi m415.dg 150mm linear stage

  • San Jose, California, United States
  • Jan 30th
Translation stage, 150mm, DC-motor, gearhead, 0.1um minimum incremental motion
ZYGO MARK IV HDP INTERFEROMETER

Zygo mark iv hdp interferometer

  • Bosque Farms, New Mexico, United States
  • Jan 30th
ZYGO MARK IV HDP INTERFEROMETER
ZYGO P/N 6184-0170-01 TRACKBALL CONTROL / CONTROLLER

Zygo p/n 6184-0170-01 trackball control / controller

  • Bosque Farms, New Mexico, United States
  • Jan 30th
ZYGO P/N 6184-0170-01 TRACKBALL CONTROL / CONTROLLER
Lot of 4 TSI LASER TEST COMPONENTS - Beam Stop, Attenuator, Mirror

Lot of 4 tsi laser test components - beam stop, attenuator, mirror

  • Mesa, Arizona, United States
  • Jan 30th
Lot of 4 TSI Laser Components - Gently Used TSI 9106 TSI 9107Mirror on pedestal Anodized aluminum Mirror on Pedestal is 1" diameter 6-1/4" x 3.0" TSI 9181-4 Beam Stop TSI 9204A Attenuator
THORLABS POLARIMETER DATA INTERFACE

Thorlabs polarimeter data interface

  • Bosque Farms, New Mexico, United States
  • Jan 30th
THORLABS POLARIMETER DATA INTERFACE
HUGE Kodak OEM Dichroic Optical Filter "Red Additive" In Transmission, 7”x6”

Huge kodak oem dichroic optical filter "red additive" in transmission, 7”x6”

  • Spencerport, New York, United States
  • Jan 30th
New, unused, opened up to take photos. OEM part (Manufactured by Eastman Kodak, pn 272060, pn 331380). Red Additive (Dichroic, type optical filter).
HUGE Kodak OEM Dichroic Optical Filter "Blue Additive" In Transmission, 7”x6”

Huge kodak oem dichroic optical filter "blue additive" in transmission, 7”x6”

  • Spencerport, New York, United States
  • Jan 30th
New, unused, opened up to take photos. OEM part (Manufactured by Eastman Kodak, pn 272061, pn 331379). Blue Additive (Dichroic, type optical filter).
HUGE Kodak OEM Dichroic Optical Filter "Gre Additive" In Transmission, 7”x6”

Huge kodak oem dichroic optical filter "gre additive" in transmission, 7”x6”

  • Spencerport, New York, United States
  • Jan 30th
New, unused, opened up to take photos. OEM part (Manufactured by Eastman Kodak Co.) Green Additive (Dichroic type optical filter)
Newport/NRC Model 32-A Optical Support Rod Fine Positioner for 1.5" Rods

Newport/nrc model 32-a optical support rod fine positioner for 1.5" rods

  • Compton, California, United States
  • Jan 30th
Newport/NRC Model 32-A Optical Support Rod Fine Positioner for 1.5" Rods
Five (5) Front Surface Mirror Protected Aluminum 58 x 44 x 3mm for Laser Optics

Five (5) front surface mirror protected aluminum 58 x 44 x 3mm for laser optics

  • Spencerport, New York, United States
  • Jan 30th
This lot is for five (5) pieces, Front Surface Mirror Protected Aluminum with blue surface protection film. Size: 58mm x 44mm x 3mm (2.28 x 1.73 x 0.118”) Photos show the back side reflection without peeling back the blue film that would have contaminated the surface. These offer no double images or distortion that
New Melles Griot LENS Plano-Convex # 01LPX129,  60mm FL, 47.0mm Dia Laser Optics

New melles griot lens plano-convex # 01lpx129, 60mm fl, 47.0mm dia laser optics

  • Spencerport, New York, United States
  • Jan 30th
Melles Griot Plano Convex Lens part number # 01LPX129, 60mm FL, 47.0mm Diameter Photos shown as packaged inside the shipping bag still wrapped in lens tissue, appears new unopened. Note: I did not open it up any farther for photos because I do not have a cle

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies