lathe chuck jaws for sale, brand-new and used.

Please refer to the photos for condition. This chuck is in good working order. The #4 Jaw section is a little tight, (needs to be well greased.

Set of 3 Bison ? (matched the appearance with images from a Bison dealer. No positive Bison is the maker) Hard Steel Chuck Base Jaws.

Set of 3 American Standard Hard Steel Chuck Base Jaws. They are each marked "04 8200" and individually numbered on the bottoms "1", "2", "3". They are in very good Condition.

HURON Steel Pointed Soft Chuck Jaws Model: #T15A7.5P MSRP: $120

This is a used 12" 3 jaw chuck made by Bison. It has 2 pc, jaws. The top jaws that are on it are pretty used up but they'll work.

This is a used 12" 3 jaw chuck. I don't know who it's made by. It has 2 pc, jaws.

Berg Model KF3/160 6"/160mm Hydraulic Chuck, Very good to excellent condition. 6" / 160mm Nominal Diameter (measured about 157mm) Reversible Jaws Rated at 3600 RPM Force (maximum) = 20 kN The draw stud threads are M16-2.0, and about 35mm long No nicks or cuts into the body or jaws. Rust on circumference (see photo #6).

This is a new 10" chuck with the extra set of jaws. It is MSC part number 08550758. Has a few scratches from being stored in the open box.

body { /*padding: 20px 80px 20px 20px;*/ font-family: "Source Sans Pro", sans-serif; } h2 { margin-top: 0; } .images img { max-width: 400px; }

You Are Bidding / Buying! H & R Manufacturing H & R PART # HR-6K-RJ

10" 4-Jaw D1-6 Cam-Lock Lathe Chucks Features Direct Mounting chuck with Camlock Nose. Body made of high grade semi-steel. Jaws are individually adjustable, allowing firm gripping of odd shaped work.

Chucks are provided with: • 1 Set of hard master jaws • 1 Set of hard top reversible jaws • 1 Chuck wrench • 1 Set of mounting bolts • 2 Hex keys • Eye bolts for chuck sizes 15-3/4" and larger TECHNICAL DATA Chuck Diameter D in 8

This Sale is for ONE NOS (New Old Stock) GERMAN made ROTO RECORD LATHE CHUCK 110mm or approximately 4-1/4" 3 jaw With 2 Sets of JAWS Item #WR72A410. The Chuck is new in box and comes in original packaging as matched set with 2 sets of Jaws Inner and Outer, Chuck Key and 3 mounting bolts. The one shown in photographs has had the excess packing grease cleaned from surface for photographs, you may receive the one shown or one that ha

Toolmex has moved their production of manual chucks to Poland. Introducing Toolmex Line of Precision Lathe Chucks. 6" SET-TRU Forged Steel Chuck with Fine Adjustment 3-Jaw Chuck with Two-Piece Hard Reversible Jaws • 3 Pinion Design • 0.0006" T.I.R.

100 mm 3 Jaws Self Centering Chuck + lathe key Reversible jaws set included Recess is 70 mm Total Height excluding the jaws (Only Body) : 46 mm, The mounting drill thread is M6 x 3 to clamp

100 mm 3 Jaws Self Centering Chuck + lathe key Reversible jaws set included Recess is 70 mm Total Height excluding the jaws (Only Body) : 46 mm, The mounting drill thread is M6 x 3 to clamp Comes with a Back Plate which is M6 drill-threaded to mount the chuck on it. the recess is so that it matches to the recess of the chuck with no play. Then the plate is counter bored with M8 drills in a manner that it fits to both your 3 as well 4 slot rotary table.

The SC4 is perfect for the demanding woodturner, being capable of holding large work pieces yet possessing the precision and compactness to handle more delicate work. This model features an enclosed back with full indexing plate and has pinions driven by a long ball ended hex key to make access easy, even when large work pieces are mounted.

Cushman chuck jaws only, good condition. They will fit the chuck that is pictured. Numbered 1 - 3.  Please wait to be billed.