lathe chuck jaws for sale, brand-new and used.

Abbott 12" Lathe Chuck Pie Jaws 90 deg serration x 1/16 pitch SMW-EF-120-AP, Style K 2" Thick, .827 groove width, 1.187 hole spacing. NOTE: ALL MACHINERY IS SOLD AS IS WHERE IS WITH NO WARRANTY OR GUARANTEE. ALL MACHINE SAFEGUARDING AND OSHA REQUIREMENTS ARE THE RESPONSIBILITY OF THE BUYER.

Abbott 6" Aluminum Lathe Chuck Pie Jaws 60 deg serration x 1.5mm pitch 6G6P1STS, .433 groove, .984" hole spacing NOTE: ALL MACHINERY IS SOLD AS IS WHERE IS WITH NO WARRANTY OR GUARANTEE. ALL MACHINE SAFEGUARDING AND OSHA REQUIREMENTS ARE THE RESPONSIBILITY OF THE BUYER. WE DO NOT MODIFY OR ALTER ANY MERCHANDISE THAT WE BUY OR SELL.

Abbott 6" Aluminum Lathe Chuck Pie Jaws 60 deg serration x 1.5mm pitch SUG6PSTS, .433 groove, .984" hole spacing NOTE: ALL MACHINERY IS SOLD AS IS WHERE IS WITH NO WARRANTY OR GUARANTEE. ALL MACHINE SAFEGUARDING AND OSHA REQUIREMENTS ARE THE RESPONSIBILITY OF THE BUYER. WE DO NOT MODIFY OR ALTER ANY MERCHANDISE THAT WE BUY OR SELL.

Specs Manual Lathe Chucks; Chuck Type: Self-Centering; Nominal Chuck Size: 8; Number of Jaws: 3; Adjustable (Yes/No): No; Mount: D1-6; Through-Hole Diameter (mm): 50.00 Chuck Type Self-Centering Nominal Chuck Size 8 Number of Jaws 3

Ajax 10" Soft Jaw Boring Ring BETTER CONCENTRICITY (TIR) REDUCE MACHINE WEAR & TEAR HARDENED AND PRECISION GROUND How Chuck Jaw Boring Rings Works * For power and manual lathe chucks. * Save 75% on set up time and get truer to tolerance on bored out jaw. * East to Use: Just Insert bolts in hole of soft jaws * Tightin 3 Socket head cap screws onto 3 top jaws.

CUSHMAN LATHE CHUCK HARD SOLID JAWS (K 20) CONDITION: Used / See Photos / Normal Wear and Tear Good Working Condition: L 2.882 / C 1.850 / B .839 / F .282 / E .377 Owner Markings: NO Will Combine Shipping – Email me and I will provide you an updated invoice.

All I know about these small, old Lathe Chuck Jaws, is what is stamped on them: 56 I (as in the capital letter i) The dimensions are approximately: 1-7/8 length x 1-5/8 height x 9/16 wide

Travers Lathe / Machine ChuckMade in ENGLAND 4-Jaw Construction with independent movement6" HEAD DIAMETER Used- As shown.Threads on back appear to be worn / damaged from storage

***Hard Lathe Chuck Jaws*** Jaw Interface Type: 1.5mm x 60 Serrated Maximum Compatible Chuck Diameter: 11" Minimum Compatible Chuck Diameter: 10" Number of Steps: 1Groove Width: .63" Distance Between Mount Hole Centers: 1.181" Fastener Size: 12mmBrand Compatibility: Kitagawa;

H & R ***Hard Lathe Chuck Jaws*** Jaw Type: Top Jaws Jaw Interface Type: 1.5mm x 60 Serrated Maximum Compatible Chuck Diameter: 15" Minimum Compatible Chuck Diameter: 15" Number of Steps: 2 Groove Width: .8660" Distance Between Mount Hole Centers: 1.69" Fastener Size: 20mm Brand Compatibility: Kitagawa B-15 Overall Width/Diameter: 2-1/2" Overall Length: 5-1/2" Number of Jaws: 3 Overall Height: 3.469" Material: Case Hardened Steel THIS IS FOR SET OF 2 Lathe Chuck Jaws FREE SHIPPING!!!

Used - Good Condition - The grease inside is old. Needs to be disassembled, cleaned and relubricated. Otherwise it moves freely.

You are bidding on a NEW Kitagawa BB-210 Big Bore CNC Lathe Power Chuck. link http://kitagawa.com/wp-content/uploads/BB200.pdf 3.189" Bore Includes: Master Hard Jaws, (1) Set of 3 Soft Jaws and Chuck Wrench. Call 262-719-0232 or email with questions.

H&R Mfg. COLLET PAD CHUCK JAWS. FOR KITAGAWA AND OTHER 1.5 SERRATED CHUCKS ACCEPTS #3,4 AND 5 WARNER SWASEY COLLET PADS A FEW COSMETIC DINGS OTHER THAN THAT JAWS ARE FINE 1.18 BOLT CENTER 1 SET OF PADS INCLUDED

I ended up with this at a local auction years ago. The sprinkler system in my warehouse leaked and the chuck has some rust on it The drawtube is 33 3/4 inches long with a 2.5 inch I.D. All of the jaws and the master jaws are included.

3 Pc. Set of Soft Jaws for EMCO Compact 5 Lathe 3-Jaw Self Centering 80mm Chuck Very good condition Please use photos as part of description, contact us if you would like additional pictures. Please ask any questions before bidding.

Lathe Chuck; 6" adjustable; L1-0D mount Includes internal/reverse jaws

EMCO Compact 5 Manual Lathe 3-Jaw Self Centering 80mm Chuck w/Reversible Jaws & Chuck Key Very good condition May have some signs of cosmetic wear Please use photos as part of description, contact us if you would like additional pictures. Please ask any questions before bidding. As with all of our vintage/antique/used items we do our best to describe accurately.

KCM Kalamazoo 8" Machinable Steel Lathe Chuck Pie Jaws #SKWK008 NOTE: ALL MACHINERY IS SOLD AS IS WHERE IS WITH NO WARRANTY OR GUARANTEE. ALL MACHINE SAFEGUARDING AND OSHA REQUIREMENTS ARE THE RESPONSIBILITY OF THE BUYER. WE DO NOT MODIFY OR ALTER ANY MERCHANDISE THAT WE BUY OR SELL.

6" Buck 6- Jaw Lathe Chuck #3662