lathe chuck jaws for sale, brand-new and used.

Auto-Strong brand Lathe Scroll Chuck -- KD model chuck made of Meehanite alloy -- 10 in. size with three jaws/camlock back -- stamped: D1-6-10 with an 'M' -- very heavy (~60 lbs/29 kg) quality chuck made in Taiwan by Di Chun Iron Work -- main body is 3 3/8 in. thick with a 3 in.

Here is your chance to own a well made 8" four jaw lathe chuck with independently adjustable jaws. This is a direct mount chuck, you supply your own back plate.

Selling a 7.5" lathe chuck made by Cushman Chuck company. The backing plate is 2-3/8" x 6tpi. What you see is what you get.

This is a VERY High Quality, High Precision Lathe Chuck. This chuck is as good as any of the top chucks out there! These chucks are balanced, and very high precision, perfect for any sort of production use, gunsmithing, or any higher end work.

You are bidding on one Craftsman Four Jaw Chuck for an Atlas Craftsman 6 inch metal turning lathe with a 1 inch X 10 T.P.I. Spindle. The chuck is 4 inches in diameter and 2 7/8 inches high, and has reversible jaws .

Offered for sale is a very nice 4 jaw independent lathe chuck made by EMCO.Jaws are reversible allowing O.D, I.D. and larger part clamping. Plain back, no back plate.Originally purchased with EMCO Maximat V10-P lathe.

BTC Zero-Set Lathe Chuck Diameter - 12” Chuck Type - Self Centering Number of Jaws - 6 Mount - Plain Back Through Hole Diameter - 3.2680” Jaw Pieces - Two-Piece Model: #1126R MSRP: $1600.00 High precision adjustable chuck. Purchase mounting plate through BTC to fit the nose of your lathe. Item is unused and never be

Thank You For Looking At Our Products Product Information:RAM ProductsManufactured in Inglewood, CAMade in USA!Cams for Setting Soft JawsSet Up For Boring Soft Ja

Sadler 5” Lathe Bezel Chuck 5C Mount Advantages of this chuck compared to a Swiss Scroll Chuck: 1. At negligible cost you make your replacement jaws from aluminum hex stock. 2.

Brand new unit Quick set up in fixtures and 5C spindles 4" diameter Scroll Chuck with 3-Jaws Self centering Scroll type 2 sets of solid steel jaws(internal and external) Supplied with wrench Outside diameter (clamp range): 0.079"~3.000" Inside Diameter (Jam range): 1.181"~3.543" Hole through 5C Adaptor: 0.75" Hole through chuck: 0.866"

Lot of steel jaws, master jaws and corresponding tee nuts (10mm bolts required) for 8” 3-Jaw Pratt Burnerd power chuck. Master jaw slot width is .630”, height is 1.525”, width at base is 2.25”, width on neck is 1.5” with 60° serrations. The steel jaws come in various sizes but all fit perfectly to the master jaws.