+ Post new Ad
Lathe CNC Bar Puller Kit 11 Grippers (1/4" to 1 1/2 in 1/8" increments) plus 5/8, US $515.00 – Picture 0
Lathe CNC Bar Puller Kit 11 Grippers (1/4" to 1 1/2 in 1/8" increments) plus 5/8, US $515.00 – Picture 0

Lathe Cnc Bar Puller Kit 11 Grippers (1/4" To 1 1/2 In 1/8" Increments) Plus 5/8

US $515.00

  • Columbus, Ohio, United States
  • Jan 30th
Open on mobile:
QR code
Lathe CNC Bar Puller Kit The lightweight and self-activating bar puller has no moving parts, mounts in 60 seconds with gripper change in about 30 seconds, and does not interfere with other tools or cause turret imbalance. When a bar puller is used, the lathe turret no longer acts as a stock stop, reducing turret degradation and eliminating expensive, space-consuming, high maintenance bar feeds. How It Works 1. Mount shank in turret; screw on adapter (if required) and gripper. 2. Insert bar through back of spindle and clamp with collet or chuck. 3. Face off minimum 1/4" projection using parting off command in CNC program. 4. Index turret to bar pull and traverse turret toward spindle for programmed distance, sliding gripper over stock. 5. Release clamping pressure on bar. 6. Retract turret programmed distance. 7. Reclamp Bar. 8. Retract turret sufficiently to clear gripper from bar. 9. Begin programmed machining cycle. 10. Repeat until all of bar is used. Kit Includes 11 Grippers (1/4" to 1 1/2 in 1/8" increments) plus 5/8" and 1" adapters Stock photo: Kit May Very In Size CUSTOMER PLEASE SPECIFY AT CHECK OUT SHANK SIZE 1/2, 5/8, 3/4, 7/8, 1, 1 1/4, 1 1/2 $10.00 Shipping Inside Continental 48 United States. Alaska & Hawaii & International buyers pay priority cost. We require a physical address on all items Sorry NO P.O. Box. 575 N. Hague Ave. Columbus, Ohio. 43204 Phone # 1-800-543-5998 After purchasing, pay instantly with your credit card through PayPal!
Condition:
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...
Manufacturer Dunham Tool
Country/Region of Manufacture United States

Directions

Similar products from Collet Chucks & Sets

Vintage Young Bros Machine Made 3/8 inch Steel Stamp Set 9 Numbers Muscatine Io

Vintage Young Bros Machine Made 3/8 inch Steel Stamp Set 9 Numbers Muscatine Io

  • Temecula, California, United States
  • Jan 30th
JACOBS RUBBER FLEX COLLET CHUCK D1-6 MOUNT W/FULL SET COLLETS***SUPERB***

JACOBS RUBBER FLEX COLLET CHUCK D1-6 MOUNT W/FULL SET COLLETS***SUPERB***

  • Highland, New York, United States
  • Jan 30th
Collet Chuck HSK 40E x ER 25 75 mm Techniks #31383-E ((UP6A))

Collet Chuck HSK 40E x ER 25 75 mm Techniks #31383-E ((UP6A))

  • Saint Louis, Missouri, United States
  • Jan 30th
JACOBS RUBBER FLEX COLLET CHUCK WITH L1 BACK AND 2 RUBBER FLEX COLLET SETS

JACOBS RUBBER FLEX COLLET CHUCK WITH L1 BACK AND 2 RUBBER FLEX COLLET SETS

  • Pinellas Park, Florida, United States
  • Jan 30th
UNIVERSAL ENGINEERING TSD ACURA-FLEX STRAIGHT SHANK COLLET HOLDER & COLLETS

UNIVERSAL ENGINEERING TSD ACURA-FLEX STRAIGHT SHANK COLLET HOLDER & COLLETS

  • Carbondale, Pennsylvania, United States
  • Jan 30th
LAIP power collet chuck 6174

LAIP power collet chuck 6174

  • Hot Springs National Park, Arkansas, United States
  • Jan 30th
Kennametal Indexable HTS Deep Hole Drilling Extension 32mm 5.34148R048280a

Kennametal Indexable HTS Deep Hole Drilling Extension 32mm 5.34148R048280a

  • Hot Springs National Park, Arkansas, United States
  • Jan 30th
ETM Spring Collet Chucks

ETM Spring Collet Chucks

  • Odessa, Florida, United States
  • Jan 30th
PARLEC SPRING COLLET CHUCK

PARLEC SPRING COLLET CHUCK

  • Odessa, Florida, United States
  • Jan 30th
ERICKSON COLLET CHUCK

ERICKSON COLLET CHUCK

  • Odessa, Florida, United States
  • Jan 30th
Bison Collet Chuck ER-32 + Wrench Fits R8 Bridgeport

Bison Collet Chuck ER-32 + Wrench Fits R8 Bridgeport

  • Carrollton, Ohio, United States
  • Jan 30th
ER-32 Collet Chuck +11 Collets Set R8 Fits Bridgeports

ER-32 Collet Chuck +11 Collets Set R8 Fits Bridgeports

  • Carrollton, Ohio, United States
  • Jan 30th
Hertel HCV40ER32256 Collet Chuck Series ER-32 CAT40

Hertel HCV40ER32256 Collet Chuck Series ER-32 CAT40

  • Vista, California, United States
  • Jan 30th
RARE Schaublin 102 E25 Collet Chuck #161-420 + 1 Collet dia 10mm

RARE Schaublin 102 E25 Collet Chuck #161-420 + 1 Collet dia 10mm

  • Ukraine, Ukraine
  • Jan 30th
BRINEY BR32-14 UP COLLET 15-14 New (Lot of 3)

BRINEY BR32-14 UP COLLET 15-14 New (Lot of 3)

  • Wilmington, Ohio, United States
  • Jan 30th
Young Bros Stamp Work 3/16 inch Steel Set 27 Letter Characters MADE IN USA 05271

Young Bros Stamp Work 3/16 inch Steel Set 27 Letter Characters MADE IN USA 05271

  • Huntington, New York, United States
  • Jan 30th
HARDINGE LATHE 5C COLLET DRAW TUBE DV-59 DSM-59 ***XLNT***

HARDINGE LATHE 5C COLLET DRAW TUBE DV-59 DSM-59 ***XLNT***

  • Highland, New York, United States
  • Jan 30th
TECNARA ER25 COLLET CHUCK w/ CAT40 SHANK

TECNARA ER25 COLLET CHUCK w/ CAT40 SHANK

  • Covina, California, United States
  • Jan 30th
PARLEC C40S-18DC2

PARLEC C40S-18DC2

  • Chicago, Illinois, United States
  • Jan 30th
SHARS NMTB40 1/2" Keyless drill chuck Integral Shank 16mm NMTB 40 NEW

SHARS NMTB40 1/2" Keyless drill chuck Integral Shank 16mm NMTB 40 NEW

  • Saint Charles, Illinois, United States
  • Jan 30th

People who viewed this item also vieved

ANGLE PLATE STEP MACHINIST TOOLMAKER HARDENED GRIND FIXTURE 3x2.5x3

ANGLE PLATE STEP MACHINIST TOOLMAKER HARDENED GRIND FIXTURE 3x2.5x3

  • Hadley, Pennsylvania, United States
  • May 28th
ANGLE PLATE STEP MACHINIST TOOLMAKER HARDENED GRIND FIXTURE 3x4 1/8x3

ANGLE PLATE STEP MACHINIST TOOLMAKER HARDENED GRIND FIXTURE 3x4 1/8x3

  • Hadley, Pennsylvania, United States
  • May 28th
MAGNETIC TRANSFER V-BLOCK machinist tools alluminum and steel

MAGNETIC TRANSFER V-BLOCK machinist tools alluminum and steel

  • Hadley, Pennsylvania, United States
  • May 28th
High Quality RSB Red South Bend Collett 1/16 #3 R-S-B in case

High Quality RSB Red South Bend Collett 1/16 #3 R-S-B in case

  • Montoursville, Pennsylvania, United States
  • May 29th
High Quality RSB Red South Bend Collett 1/2 #3 R-S-B NMT in case

High Quality RSB Red South Bend Collett 1/2 #3 R-S-B NMT in case

  • Montoursville, Pennsylvania, United States
  • May 29th
HARDINGE SET OF 5C COLLETS FRACTIONAL SIZES GOOD CONDITION

HARDINGE SET OF 5C COLLETS FRACTIONAL SIZES GOOD CONDITION

  • Saint-Laurent, Quebec, Canada
  • May 29th
USED BULLNOSE 5MT DEAD CENTER BULL NOSE 5 MT 5689-3342 POINT DIA. 4.021"

USED BULLNOSE 5MT DEAD CENTER BULL NOSE 5 MT 5689-3342 POINT DIA. 4.021"

  • Fairfield, Iowa, United States
  • May 31st
USED LATHE DEAD CENTER MT2 SHANK x 1.875" POINT DIAMETER

USED LATHE DEAD CENTER MT2 SHANK x 1.875" POINT DIAMETER

  • Fairfield, Iowa, United States
  • May 31st
HEAVILY USED #4MT MORSE TAPER LATHE DEAD CENTER (Point Diameter 1.246")

HEAVILY USED #4MT MORSE TAPER LATHE DEAD CENTER (Point Diameter 1.246")

  • Fairfield, Iowa, United States
  • May 31st
DE-STA-CO Model 235208 flat tip spindle 15 lot

DE-STA-CO Model 235208 flat tip spindle 15 lot

  • Fort Myers, Florida, United States
  • May 31st
Lot of 6 Pro-Flex CSST 3/4", 1", 1-1/4" Bonding Clamp PFBC-CDEC FREE SHIPPING

Lot of 6 Pro-Flex CSST 3/4", 1", 1-1/4" Bonding Clamp PFBC-CDEC FREE SHIPPING

  • Beaufort, North Carolina, United States
  • May 31st
DE-STA-CO 484 Toggle Clamp, Squeeze Action, Wide Jaw (2 Clamps)

DE-STA-CO 484 Toggle Clamp, Squeeze Action, Wide Jaw (2 Clamps)

  • Greenwood, Indiana, United States
  • May 31st
TTC SFT1250T1 American Standard Tongue and Groove Soft Jaws - Pack of 3

TTC SFT1250T1 American Standard Tongue and Groove Soft Jaws - Pack of 3

  • Duncan, South Carolina, United States
  • May 31st
Gator FLE-250D6 D1-6 MACHINED CAST-IRON ADAPTER FOR 10' CHUCKS

Gator FLE-250D6 D1-6 MACHINED CAST-IRON ADAPTER FOR 10' CHUCKS

  • Duncan, South Carolina, United States
  • May 31st
Gator FLE-160D4 D1-4 MACHINED CAST-IRON ADAPTER FOR 6' CHUCKS

Gator FLE-160D4 D1-4 MACHINED CAST-IRON ADAPTER FOR 6' CHUCKS

  • Duncan, South Carolina, United States
  • May 31st
1 3/8" & 1 1/2" HSS 6 FLUTE NIAGARA BRAND TIN COATED END MILLS(2 PCS) 3/4" SHANK

1 3/8" & 1 1/2" HSS 6 FLUTE NIAGARA BRAND TIN COATED END MILLS(2 PCS) 3/4" SHANK

  • Ventura, California, United States
  • Jun 1st
Stanley toolmakers vise

Stanley toolmakers vise

  • Wethersfield, Connecticut, United States
  • Jun 1st
Enco Model #42023 Drill Press Vise

Enco Model #42023 Drill Press Vise

  • Wethersfield, Connecticut, United States
  • Jun 1st
ITW WORKHOLDING Model E1871AD08 & ITWW M3437A - Qty 3

ITW WORKHOLDING Model E1871AD08 & ITWW M3437A - Qty 3

  • Mentor, Ohio, United States
  • Jun 9th
MIXED LOT MACHINIST STARRETT INSPECTION V BLOCK PARALLEL TOOL DIE METAL WORKING

MIXED LOT MACHINIST STARRETT INSPECTION V BLOCK PARALLEL TOOL DIE METAL WORKING

  • Grayling, Michigan, United States
  • Jun 9th
2 MACHINIST ANGLE INSPECTION BLOCKS STEP RISER PRECISION TOOL DIE METAL WORKING

2 MACHINIST ANGLE INSPECTION BLOCKS STEP RISER PRECISION TOOL DIE METAL WORKING

  • Grayling, Michigan, United States
  • Jun 9th
6 MACHINIST PARALLELS INSPECTION BLOCKS I BEAM PRECISION TOOL DIE METAL WORKING

6 MACHINIST PARALLELS INSPECTION BLOCKS I BEAM PRECISION TOOL DIE METAL WORKING

  • Grayling, Michigan, United States
  • Jun 9th
Dumont Keyway Broach Bushing 1 9/16” Dia. x 3/8” Wide Slot x 2 1/2 ” Long

Dumont Keyway Broach Bushing 1 9/16” Dia. x 3/8” Wide Slot x 2 1/2 ” Long

  • Lake Saint Louis, Missouri, United States
  • Jun 9th
Dumont Keyway Broach Bushing 1 1/2 ” Dia. x 3/8” Wide Slot x 2 1/2 ” Long

Dumont Keyway Broach Bushing 1 1/2 ” Dia. x 3/8” Wide Slot x 2 1/2 ” Long

  • Lake Saint Louis, Missouri, United States
  • Jun 9th
HAAS BRUSHLESS CONTROL BOX ROTARY TABLE INDEXER SCO-AC175/SERVO CONTROL LMS mona

HAAS BRUSHLESS CONTROL BOX ROTARY TABLE INDEXER SCO-AC175/SERVO CONTROL LMS mona

  • Sun Valley, California, United States
  • Jun 9th
HAAS BRUSHLESS CONTROL BOX ROTARY TABLE INDEXER SCOL LMS

HAAS BRUSHLESS CONTROL BOX ROTARY TABLE INDEXER SCOL LMS

  • Sun Valley, California, United States
  • Jun 9th
7" x 7" Cross Slide Rotary Table

7" x 7" Cross Slide Rotary Table

  • DeKalb, Illinois, United States
  • Jun 9th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies