screw gripper for sale, brand-new and used.

You are bidding on a used Scorbot ER-III with controller, cabling modified for a DB-9 serial port connector, software and manual in PDF format. The unit came out of an instructional lab and was never really used for more than a few classes. It spent most of it's time in storage.

The Scorbot ER-III is a JAR (Jointed Arm Revolute) robot which means it's movements are somewhat similar to that of the human arm. The ER III has three axes of rotation and five degrees of freedom. These degrees are illustrated through the movement of different parts which are: 1) Base- lower part of robot which rotates about the y-axis.

var itemNumber = window.ebayItemID ?

Quick Overview This robot gripper is a very strong one, mainly made of acrylic board, driven by a small screw motor, which can provide a high clamping force. This Makeblock Strong Robot gripper is mainly made of acrylic board, driven by a small screw motor, which can provide a high clamping force. This gripper have two configurations, 4-finger configuration and 2-finger configuration, you can easily change the configuration to fit for special application case.

About us Shipping Payment

Scorbot ERIII with Controller. Turns on. Tested the Scorbot using the Test button on controller, motors had full range of motion.

Makeblock Educational Ultimate Robot Kit - Blue Radio Shack Description:This is a comprehensive robot kit for beginners to explore the robotic world or experts to build complex robots. It contains everything you need to construct your robot dreams: metal geared motors, Arduino-compatible controller, programmable RGB LED strip, different kinds of sensors, robotic gripper and other mechanical parts.It is also great for learning Arduino and Scratch programming.

1968UH5H.32 New Gripper Stainless Steel (or possibly Nickel) Snap Fastener Sockets, or M4 / #8 Screw Trim Washers, Part Number 64-0721-1183. Each bid quantity is for One Hundred (100) Pieces. You may bid / buy any number, up to the total quantity available above.

You may have noticed my other Miehle V-50 Vertical press parts sales. I have a Heidelberg KSBA, and it works a LOT better than the vertical. I even have some tricks to let me get closer to the gripper with a numbering machine, perf, and score, so I am disassembling the V-50 and selling it part by part.

var itemNumber = window.ebayItemID ?

var itemNumber = window.ebayItemID ? window.ebayItemID : -1; function passpara(){return '&id=1906446&itembgcolor=0xFFFFFF&bordercolor=0x000006&storewindowbgcolor=0xf1f1f1&toptextcolor=0xFFFFFF&bottomtextcolor=0xFFFFFF&stripcolor=0x006ab1&auctionclosemessagecolor=0x006ab1&emptyboxmessagecolor=0x006ab1&buttovercolor=0x006ab1&buttoutcolor=0x006ab1&searchtitlecolor=0xFFFFFF&searchbuttbgcolor=0xFFFFFF&searchbutttextcolor=0x000000&searchbuttbordercolor=0x000000&itemhighlightcol