Toll Free: (800) 917-7205 Our Optima Scale OP-919 series weigh bars consists of two low profile weigh bars, with a remote digital indicator. Our units ease of portability, with carrying handles, and built in rechargeable battery, makes this a truly portable and flexible weigh system. Simply place the load bars under an exising squeeze chute or platform and you`re ready to weigh.
There are 7 Wattstopper items in this listing. They have never been used and are in their original boxes. (1 each) Wattstopper LMRC-221 Forward Phase Dimming Room Controller, 1 Load Wattstopper LMRC-221 Forward Phase Dimming Room Controller, 1 Load Features: Number of Loads: 1 Voltage: 120/277 VAC 50/60Hz
DESCRIPTION The Datakom DKG-329 is a control and protection panel designed to monitor 3-phase mains voltages, send remote start command to generating sets and make changeover of both generator and mains contactors. The unit offers an internal synchroscope for uninterrupted transfer in both directions. The number of gensets to run before transfer is selectable, allowing multiple genset support.
Description:UDB130xS series direct digital synthesis signal generator use DDS technology and FPGA design with the characters of high stability and low distortion ect,A,B two channel output, two channel TTL output, 60MHz frequency meter,counter function, have sweep function, the start and end frequency and sweep time can be set at will. It’s the ideal equipment of electronic engineer
Shop used glass installation suction cups from CR Laurence, "woods power grip" pair, plus one 4" generic model for smaller support. Google "Woods Power Grip 6" Flat Vacuum Cup with Rigid Handle" for more info Features: Offset, fixed handle helps prevent load from swinging or changing orientation when lifted. Strong enough for most jobs, yet small enough to fit in a tool box or large pocket.
Brand new and sealed inside the original opened Intermec retail box. Although the box is opened, the printer is completely undisturbed and sealed inside the retail plastics. The full Intermec manufacturer warranty applies with our invoice!
Features: Charge module; Input voltage: 5V; Size: approx. 2.6 x 1.7cm/ 1.02" x 0.67"; Maximum charging current: 1000mA; Cell overdischarge protection voltage: 2.5V; LED indicator- red is charging Green is full charged; Cell overdischarge protection current: 3A; Charging cut-off voltage: 4.2V ±1%;
Lighting Contactor COIL 120VAC 60Hz, Range: 110-120V Coil 40 Amp 4 Pole 500 VAC Contactors - NC Contacts Energy saving low power drain save 120kwh/year Model 934004 is an electrically held lighting contactor. 40 Amp four-pole normally CLOSED (N.C.)
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.