load ring for sale, brand-new and used.

UP FOR SALE FAN MOTOR , HERE ARE THE SPECS :

YOU ARE BIDDING ON MOTOR WITH THE FOLLOWING SPECS : Motor Application Fans Motor Sub Application Evaporative Cooling Fans Motor TypeSplit-Phase EnclosureOpen Dripproof HP1/3 Number of Speeds1 Nameplate RPM1725 NEMA/IEC Frame56Z Frame 56Z Voltage

YOU ARE BIDDING ON MOTOR WITH THE FOLLOWING SPECS : Motor Type PSC Enclosure Open Air-Over HP 1/3 Nameplate RPM 10

YOU ARE BIDDING ON,Direct Drive Blower, Permanent Split Capacitor Open Air Over Motor, HP

YOU ARE BIDDING ON Room Air Conditioner, Permanent Split Capacitor Open Air Over Motor, HP 1/2, RPM 1625, Number of Speeds 3, Voltage 208-230 V, NEMA Frame 48YZ, Body Diameter 5 5/8 Inch, Service Factor 1.00, Frequency 60 & 50 Hz, Mounting Ring/Stud, Bearings Sleeve, Thermal Protection Automatic, Shaft Dimensions 1/2 x 7 & 1/2 x 7 1/2 Inch, Full Load Amps 3.0, Rotation CCW-Viewed From Lead End, Capacitor Required 6X653 MODEL # 5KCP39MG5313ET MFR : GE LOCATION : W3PALLET33M790KHFG

YOU ARE BIDDING ON Direct Drive Blower, Permanent Split Capacitor Open Air Over Motor, HP 1/6, RPM 1075, Number of Speeds 1, Voltage 115 V, NEMA Frame 48YZ, Body Diameter 5 5/8 Inch, Service Factor 1.00, Frequency 60 Hz, Mounting Ring/Stud, Bearings Sleeve, Thermal Protection Automatic, Shaft Dimensions 1/2 x 4 Inch, Full Load Amps 2.3, Rotation CW , NEED CAPACITOR SOME SCRATCHES MODEL # 5KCP39DG3304ET MFR : GE LOCATION : W1IL6LEFT4M409PALLETUGF

Shipping to lower 48 States only Technical Specs

Powerful little 12v motor for many hobby applications. Motor comes with a V-Groove pulley for use with O-Ring belt or can be removed for straight shaft connection. Rubber grommet on output end was apparently a motor mount and can also be removed.

Up for sale is a NEW Dayton Blower Motor, 1/2hp, 1075 RPM ,115 V ,48YZ Frame, model 4M100, 4M100G. Item Direct Drive Blower Motor Motor Application HVAC/R Motor Sub Application Direct Dr Fan/Blower Motor Type PSC Enclosure

UP FOR SALE MOTOR , HERE ARE THE SPECS : Motor Application

YOU ARE BIDDING ON MOTOR WITH THE FOLLOWING SPECS : Motor Application Heating And Air Conditioning Motor Sub Application Direct Drive Blowers Motor Type PSC Enclosure Open Air-Over HP3/4 Nameplate RPM1075 Voltage115 Full Load Amps10.8 Hz

YOU ARE BIDDING ON Direct Drive Blower, Permanent Split Capacitor Open Air Over Motor, HP 1/6, RPM 1075, Number of Speeds 1, Voltage 115 V, NEMA Frame 48YZ, Body Diameter 5 5/8 Inch, Service Factor 1.00, Frequency 60 Hz, Mounting Ring/Stud, Bearings Sleeve, Thermal Protection Automatic, Shaft Dimensions 1/2 x 4 Inch, Full Load Amps 2.3, Rotation CW, Capacitor Required 6X653

UP FOR SALE MOTOR , HERE ARE THE SPECS : Item

I am offering a Dayton Direct Drive Blower Motor 1/4 HP 860 RPM 115V 56Z ODP. It is listed as new other because the motor came off a down blast fan that was damaged in freight. The motor is new but because it came from a damaged item it is considered now other.

70 volt SNC single noise chokeNew in the box. Noise Chokes - Common Mode Transformers "The Voice or Radio Frequency Interference Solution" Increasing power line harmonic and radio frequency interference (RFI) on ADSL circuits means more noise in your communication system. These induced noise frequencies can also lead to signaling p

Description Utility Surplus Sale! Lowest Prices for the BEST quality! This auction is for one complete metering kit, which includes 1 refurbished 240v ABB / Elster electric watt-hour meter & 1 Brand

Description Utility Surplus Sale! Lowest Prices for the BEST quality! This auction is for one complete metering kit, which includes 1 Sensus ICON 240v electronic solid-state watt

Climax Metal 1C-243-Z One-Piece Clamping Collar, Zinc Plating, Steel, 2-7/16" This Climax Metal one-piece clamping shaft collar is made of zinc-plated steel. It is a one-piece clamping shaft collar for applications requiring a more uniform holding power and higher axial load capacity than setscrew collars. It is easier to remove and reposition than setscrew collars and is effective on both hard and soft shafts.