lock nut washer for sale, brand-new and used.

FOR SALE, ONE GRAYHILL SERIES 71 ROTARY SELECTOR SWITCH WITH EIGHT (8) POLES AND SIX (6) POSITIONS. THE NUMBER OF POSITIONS CAN BE SET FROM 2 TO 6 BY INSERTING DOWEL PINS IN THE SUITABLE FRONT PLATE HOLES. TWO DOWEL PINS AND AN ADHESIVE METAL TAG TO KEEP THE PINS IN PLACE ARE INCLUDED.

Janco 5 Amp 115 VAC 2 position 36 Tab Rotary Switch Part# 79-1933 8716 Made In The USA, Burbank CA. They were for a project I never finished Out of the 36 connection tabs 2 sets of 6 are brass for positive connection and each positive has 2 negative tabs Comes with hardware, terminal screws, nut and lock washer for panel mounting These are very pricy even wholesale, These are at about 20% of what you would normally pay I combine shipping

Switch, Rotary, Ceramic, Open Frame, 4 Pole, 17 Positions, Shorting, Adjustable Stop, Solder Lugs, 2-13/16" DIA., 11.0 AMPS @ 28VDC Centralab (CRL) #JV9013 / Electroswitch #E4C0417N-A-12 The E4 Series was designed to offer maximum power ratings in an electronic open frame switch. Standard construction consists of a 20° index, 2-17 positions, and solder lug terminals. SPECIFICATIONS ELECTRICAL Current and Voltage Rating: Make and Break Resistive Load

2791XB1I.07 New AB Electronics (Acquired by Tyzack Turner Group PLC) Long Offset "D" Keyed Stem Rotary Switches, 2 Position 2 Pole Panel Mount w/Nuts & Washers, Max Amps 2A and Max Volts 250V, with Solder Lug Terminals, Part Number 0ARF10000-1-038, or 0AR F10000-1-038, or OAR F10000-1-038, or OARF10000-1-038. Each bid quantity is for a Lot of Two (2) Switches and Mounting Hardware. You may bid / buy any number of lots, up to the total quantity available above.

Up for sale is a pack of Four (4) pieces Toggle Switch. Specifications:

New Old Stock Lot of (1) Switchcraft Lever Switch 3 Poles Series 13000 MPN R13003L Frame: Steel over cadmium plating.

Up for bid is a lot of 12 Dialight 249-8072-3733-504 panel indicator lights. These are new 28 volt yellow lights, and consume 20 ma of power. Mechanical InformationMounting Hole Size: 0.375” (9.53 mm) Max Panel Thickness: 0.312” (7.92 mm)Mounting Torque: 8-10 in-lbs torqueElectrical SpecificationsOperating Voltage: 3.6, 5, 10, 14 and 28V DCOperating Temp: -20?C to +71?CStorage Temp: -40?

3 EA MARCO PANEL LIGHT,INDICATORS MODEL VM300-6WT NSN 6210-00-722-9766, US ARMY P/N10054244 USED CONDITION. SOLD AS SHOWN 14 DAY WARRANTY FOR COMPLETE REFUND. ALT P/NS: 16-30082-6 ELECTRO SWITCH CORP.

2 x Size N Coaxial DC Power Jack, Panel Mount, Compare to RadioShack Part # 274-1576. Requires 7/16" mounting hole. 5.5mm O.D.

LOT OF 1 (ONE): CTS/IRC POTENTIOMETER AS FOLLOWS: 500 OHM 2 WATT WIRE WOUND LOCKING SCREWDRIVER ADJUST LINEAR TAPER APPROX. DIM: 1 1/4" OD X 5/8" behind panel, 3/8" bushing This pot is marked CTS WPRL 500 and looks like a 1960's date code. The top plastic is embossed with IRC.

THIS ITEM IS FOR (1) ONE: PEC (PRECISION ELECTRONICS CORP) MINIATURE POTENTIOMETERS AS FOLLOWS: 5K (5000) OHMS AUDIO TAPER DIM: 3/4" OD X 3/8" DEEP SHAFT: 1/8" X 1/2"L W/FLAT Made in Canada New, old stock, tested good, with mounting nut & lock washer. Buyer pays S&H, $2.75 in USA, $7.75 worldwide. Payment, with-in 3 days, by Paypal.

BOURNS P/N 82C1A-E12C26 POTENTIOMETER 2.5 MEG OHM 1 WATT 10% AUDIO TAPER CERMET RESISTANCE ELEMENT 5/8" SQUARE, SINGLE TURN, SCREW-DRIVER ADJUST TERMINALS ARE J-HOOKS 1/4" BUSHING, WITH MOUNTING NUT AND LOCK WASHER. Each item is for 1 pot. New, old stock.

LOT OF 1 (ONE): BOURNS 3852A-282-103A PANEL MOUNT POTENTIOMETER 10K OHM CERMET 2 WATTS LINEAR TAPER SINGLE TURN 3/4" DIAMETER, 1/4" SLOTTED SHAFT X 1/2"L, 3/8" BUSHING SOLDER LUG TERMINALS REMOVED FROM NEW EQUIP. with mounting nut and lock washer. These pots have been tested and guaranteed good.

Lot of 4 Clarostat 381-N-50K ohm Potentiometers with mounting nut and lock washer. These parts are New Old Stock, in original packaging.