DiversiTech WG840730 Condenser Fan Motor 1/2 HP 208-230 VAC 1075 RPM reversibleMotor has never been used.It has been sitting in storage for a while, therefore the box is a bit frayed. This box was opened to take pictures of the item and to check contents.
This listing is for two KO Lee T-bolts for the tool & cutter grinders. These are 3/8" - 16 thread and are 1 1/2" long. I believe that they are the table stop bolts.
These are quality steel lag bolts that have been in the garage for many years.. They are a 15/16 square head bolt and I believe they are 5/8 inch bolt there are (17) 5 inch, (9) 6 inch, (5) 7 inch and (12) 8 inch long bolts they are new but some have a little surface rust to them. These bolts where made when they used quality steel.
I have a set of 6 NEW Panduit Copper Split Bolts that each measure 2" long and is 1.24" wide- Gauge #8 STR and please read all of the numbers that are listed on the bolts in the title line and also look at the pictures closely to make sure these are exactly what you need. Payment is expected within 3 days of the close of the auction and I will send the bolts within 3 business days of payment being made.
Vintage 1" BRASS Round Head Slotted Bolts, Qty 60, No. 8 - 32, in box Dimensions of Box = 1 3/4” x 2 1/4" x 4 1/2” Weight – 6 oz ***Note, if you're looking for a particular size of either Vintage BRASS or ZINC Screws/washers/nuts & other hardware, please message me and I'll see if I have it in stock, bu
HEX HEAD BOLTS 1/2-13 X approx. 1" LONG, PLATED, LOT OF 10 PIECES These bolts and nuts are mixed grades and classes. If you purchase more than one lot, I will ship up to four lots in one small flat rate box for $5.95 shipping.
This is 25 piece lot that's 25 bolts per lot .of Grade 8 Bolts They are a 5/16 -18 threads per inch and 1-1/4 inch long Photo shows these have been sitting in this tray on a warehouse shely for years-so a bit dusty -not pristine. Better for personal use than for re-sale. Have added lots set up for free shipping as long as they ship with the first paid lot.These came from a military hardware supply co.
This auction is for a Lot of 20 pieces-10 MM 1.50 thread pitch X 25 MM long. These are Flange hex head bolts with a yellow zinc finish. Din 8.8 6921 grade.
This particular kind of a handle was used by my dad for specialized kinds of catv line-equipment he was building back in 1960s, 1970s, all the way up until the early 1980s. That's how I know that this handle goes back to at least the early 1980s. Threaded bolts.
Here is an "INFO TUBE" fixture for holding paperwork or advertising outside for realtors, builders, landlords or For Sale By Owners. This tube measures 12 1/2" long X 3" diameter and has 2 end caps. When sealed it is completely weather proof so the paperwork stays dry.
Miscellaneous cobbler bolt lot for vintage sewing machine. These bolts were with a collection of parts for a Landis sewing/stitching machine. I do not know what kind of machine these bolts go to.
This is a Good used universal furnace blower motor mount manufactured by Triangle. 3 legs. This will fit many furnace makes and models that use 5 5/8'" blower motors.
THIS IS FOR 4 12" LONG BY 3/4" CONCRETE ANCHOR BOLTS,THEY ARE RUSTY,THEY HAVE NOT BEEN USED,PLEASE SEE PICTURES,ANY QUESTIONS PLEASE ASK,I DO COMBINE SHIPPING
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.