m 928 for sale, brand-new and used.

A friend of mine had a camera store he sold some time ago and a lot of items did not go with the store. I have access to approximately 5000 bulbs for different kind of projectors. I will try to list 20 different ones a day.

TransCore AT5406 Access Control Tag The AT5406 Access Control Tag is factory-programmed, as specified by the customer, and stores up to 10 six-bit alphanumeric characters of customer data (60 bits of ATA tag memory). The AT5406 Access Control Tag, in conjunction with TransCore Encompass readers, enables advanced security techniques that ensure a tag’s uthenticity while preventing data corruption and/or alteration. In addition, tag cloning, spoofing, copying, or duplicating is prevented.

Astron Wireless Technologies, Inc. 918-4 4-Element, 7dB Yagi Antenna, 902-928MHz with Hardware A durable, spread spectrum Yagi with maximum gain-to-boom length ration designed for FCC Part 15 and 902-928 MHz applications. These antennas provide excellent electrical performance matched with a rugged mechanical design to deliver a high value solution to your antenna requirements.

New Dental Intraoral Camera USB 2.0 Dynamic 4 Mega Pixels 6-LED + USB2.0 OC-5 A+

Sale Dental Intraoral Camera USB 2.0 Dynamic 4 Mega Pixels 6-LED + USB2.0 OC-5

This auction is for a Scotch 3M LTG 990 Linered Tape Applicator Model 19000. Tape Applicator is used but in excellent condition. Fits the following Tape Numbers and Sizes: 924, 976, 970XL........1/2" x 36 yds.

This Napa Gold filter # 2126 is new in the box. We are selling off our new old stock so here's your chance to buy some new filters at reasonable prices with free shipping. Buy it while they last.

var itemNumber = window.ebayItemID ?

This is a New Replacement Bracket for Mounting A Friction Drive Magneto On your Engine For the Earlier Waterloo & Waterloo Contract Hit & Miss Gas Engines Also Mounts On Galloway, United, Associated, Sparta Economy & A few Others That Use the two Angled 1/2" Threaded Holes in front of the flywheel, Igniter Side............. Fits: 4 Hp Sizes & Larger As it Has A bigger Platform For more room to Mount The Magneto In the correct Place......

This is a New Replacement Ball Muffler For the Later Waterloo & Waterloo Contract Hit & Miss Gas Engines, All The Small H & K Waterloo Boy 1 1/2 1 3/4 with the 3/4" exhaust Used these Mufflers, As it shows them in the Sales books.....

This is a New Replacement Ball Muffler For the Waterloo & Waterloo Contract Hit & Miss Gas Engines ...... Part # AG50 Fits: 2 1/2 3 4 & 5 Hp Sizes 1 1/4" Pipe Correct For: AMERICAN BOY, BANNER, BAUER, BIG CHIEF, DESJARDENS,

This is a New Replacement Ball Muffler For the Earlier Waterloo & Waterloo Contract Hit & Miss Gas Engines ...... Part # AG40 Fits: 1 1/2 1 3/4 & 2 Hp Sizes Correct For: AMERICAN BOY, BANNER, BAUER, BIG CHIEF, DESJARDENS, D. T.

This is an Original Rod Cap For the 1 1/2 Hp International Harvester, Or McCormick Deering "M" Gas Engines. As You Can See it is in good condition, With nice Original Patina, hard to find Pieces for those who Are trying To Put An Engine Together out Of parts Or If yours is damaged Or Missing Pieces !! I see no Damage Or Repairs !!!....Selling As IS..

This is an Original set Of Head Studs & Nuts For the 1 1/2 Hp International Harvester, Or McCormick Deering "M" Gas Engines. As You Can See they Are complete, With nice Original Patina, A stud Extractor was used to take them out, Not All Full Of Wrench Marks !! hard to find Pieces for those who Are trying To Put An Engine Together out Of parts Or If yours is damaged Or Missing Pieces !!

This is an Original set Of Head Studs & Nuts For the 3 Hp International Harvester, Or McCormick Deering "M" Gas Engines. As You Can See they Are complete, With nice Original Patina, A stud Extractor was used to take them out, Not All Full Of Wrench Marks !! hard to find Pieces for those who Are trying To Put An Engine Together out Of parts Or If yours is damaged Or Missing Pieces !!

This is a nice Greasy Original Crank Case Breather for International Harvester, Or McCormick Deering Type "M" Gas Engines. It will fit the 1 1/2, 3, and 6hp Engines. It is part number 9246T Looks to be Complete & in Working condition, Nice Hard to find Original Part, Other than possibly Cleaned It is Ready to Install & Use, Great Part For that Old Survivor Engine ....Selling As IS..

This is a nice Greasy Original Crank Case Breather for International Harvester, Or McCormick Deering Type "M" Gas Engines. It will fit the 1 1/2, 3, and 6hp Engines. But I believe this is Off A 6 Hp Engine Because of the extended Elbow Pipe ....

This is an Original Pulley, For the 1 1/2 Hp International Harvester, Or McCormick Deering "M" Gas Engines. This Measures 5 1/2" wide X 5" in Diameter With A 1 1/2" Center Mounting Hole. It is Notched to fit over the Gibb Key And Has Set Screw.

This is an Original Pulley, For the 3 Hp International Harvester, Or McCormick Deering "M" Gas Engines. This Measures 6 3/4" X 4 3/4" With A 1 3/4" Center Mounting Hole. It is Notched to fit over the Gibb Key And Has Set Screw.

This is an Original Kerosene Type Head, For the 3 Hp International Harvester, Or McCormick Deering "M" Gas Engines. As You Can See It is complete, With nice Original Patina, But Will Need Valves freed Up, And More than Likely A new Butterfly For the throttle Like Most Do... to be in working condition............A hard to find Piece for those who Are trying To Put An Engine Together out Of parts Or If yours is damaged Or Missing Pieces !!