65 pc M2.5 Screw & Nuts Set 65 pc miniature metric screws and nuts set Screws: Philips flat head, steel with nickel coating M2.5 x4 mm, x6mm, x8mm, x10mm, x12mm, 5pc each Nuts: M2.5x0.45 steel with nickel coating 20pc Washers:
30 pc M1.4 Screws & Nuts Set Hard to find miniature metric screws and nuts set, 15 pc each Screws: Philips pan head, hardened steel with nickel coating M1.4x3 mm, x4mm, x5mm 5pc each Nuts: M1.4x0.3 steel with n
105 pc Screws and Nut sets 35 Screws: M2x0.4mm Socket Hex Head Alloy Screws with black coating. 5 pc each: M2x4, x6, x8, x10, x12, x14, and x16mm 35 Nuts: M2x0.4 steel wit
This is a custom made tool, that is made for firefighters. The tools are made to be a preferred alternative to packing your turnout pockets with a ton of excess tools. My intent was to design a tool that would provide multiple purposes without sacrificing size or ability.
This listing is for a NOS - WATTS 3/4 M1, 740-050, Safety Relief Valve, 3/4" x 1", 50psi, Iron, package has wear & tear, but valve is new - never used or installed, if you have any question please email me, thanks, Tim Free shipping to lower 48 states only!
This is for a Brand New in the Box Broad Ocean Replacement Blower Motor. .5" x 3"Shaft115V 60Hz 4.5 Amps 1/4 HP - 3 Speed 1075 RPM Cap: 10uF/370Vac CL: BThermally Protected ROT and has the wire diagram on the motor and there are 6 Wires and 3 Screws.AC PASSED N5026 E1109180701706 NORDYNE AA and C-2 to 5 Ton Evaporator Coils in Model Series M1 Furnaces. I ship the same day the auction ends and if shipping is cheaper than invoiced, I will refund the amount back!Thank you for looking!
2003 Quadrel VERSALINE Q10 Pressure Sensitive Bottle Labeler Model # VERSALINE Serial # 0103-007 Q10 Labeling head Rated 120 BPM; 1,000" p/min label feed; based upon label and product specification 9 label presets Wrap around label option available 5" High Max label size 4.5" x 10' Long SS Inline conveyor with speed control
NEW OTHER: THE PACKAGE HAD PARTS THAT WERE LOOSE IN IT SO I OPENED THE BOX, BAGGED UP THE LOOSE PARTS, TAPED THEM DOWN, AND SEALED THE BOX The AC96 Aluminum Stabilizer spans 47 in and provides a standoff of 10 in. For use on aluminum ladders of all duty ratings. Attaches in minutes.
VINTAGE TPW 2-M1 GERRARD TENSIONING TOOL NOS THIS MANUALLY OPERATED TENSIONER HAS A WINDLASS DRUM FOR POSITIVE HIGH TENSION TAKE-UP. PUSHING THE TENSION HANDLE FORWARD CUTS THE LOOSE END OF THE STRAP AFTER THE SEAL HAS BEEN SEALED. STRAP SIZE 3/8"-3/4" PLASTIC.
Watts P60-M1-4 Pressure Regulator 4 way 1/4" FNPT 0-125 1-PR60 Up for bidding is a new in the box, 4-way 1/;4" Fluid Pressure Regulator. Please look over the photos and ask questions before bidding. Thank you.
YOU ARE LOOKING AT A NEW WATTS CAST IRON 1 1/4 AIR SEPARATOR AND TWO BRASS WATTS SCV CHECK VALVES TO GO WITH IT. THE SMALL VALVE IS THE ADAPTOR FOR THE FLOW VENT AND THE LARGE BOTTOM IS THE ADAPTER FOR THE EXPANSION TANK. PLEASE SHOP AND COMPARE PRICING SHIPPING AND FEEDBACK SCORE FOR THE SAME PART.
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.
