m10 nuts for sale, brand-new and used.

3-Pole 3-Throw 3P3T ROTARY switch The price is for one switch. The rotary switches are break-before-make (non-shortening). The shaft diameter is 6mm, this is roughly the standard 1/4 inch shaft.

M8 M10 M12 M14 - M20 Steel Fine Pitch Hex Hexagonal Nuts Bolt Cap Hex Nuts Black Model: Z001SZ058Color Classification: M20 * 1.5/M18 * 1.5/M16 * 1.5/M14 * 1.5/M12 * 1.5/M10 * 1.25/M8 * 1Product strength: 8Material: Carbon SteelStandard Type: GBType: Hex Nuts

M2 M2.5 M2.6 M3 M3.5 M4 M5 M6 M8 M10 Steel Hexagon Hex Nut Zinc Plated Nuts

Bollhoff P2007 air rivet nut tool sets rivet nut M4 to M10, rivet stud M5 to M8. Pulling force is controlled by set pressure. Bollhoff Rivkle P2007 Pneumatic setting tool for blind rivet nuts and studs Bollhoff P2007 product no.

304 Stainless Steel Flange Hex Lock Nuts Hexagonal Nut M3 M4 M5 M6 M8 M10 M12

M8 M10 Fine Pitch Hex Hexagonal Nuts Lighting Screw Cap Thin Nuts Zinc Plated

M10 M12 Steel Fine Pitch Hex Hexagonal Nuts Bolt Cap Hex Nuts Zinc Plated Model: Z001SZ059Color Classification: M10 * 1 / M12 * 1.25Product strength: 4.8Material: SteelStandard Type: GBType: Hex Nuts

The FLEX-5P tool is designed for installing Sherex threaded insert/rivet nuts. The tool utilizes a pull to pressure installation method. The advantage with this method is that the same insert can be installed into different material thicknesses (within the part grip range) without any adjustments to the tool once the proper pulling pressure has been set.

40pcs M3/M4/M5/M6/M8/M10 Brass Cap Hex Nuts Copper Hexagonal Nuts Assortment Set Model: M3/M4/M5/M6/M8/M10 Material: Brass Screws: M3

4pcs M10 Flange Lock Titanium Alloy Nut Ti Nut 1.5mm 1.25mm Pitch Thread Nuts

3-Pole 10-Throw 3P10T Rotary switches The price is for one switch. The rotary switches are break-before-make (non-shortening). The shaft diameter is 6mm, this is roughly the standard 1/4 inch shaft.

For Sale New The sale is for 3 **M10-1.5** anti-backlash nuts. Anti-backlash Delrin nut, designed for compact CNC machines and applications requiring linear movements. Designed specifically for the CNC hobbyist in mind, this provides a low cost solution for linear motion, when coupled with an M10-1.5 screw thread and stepper motor.

Mixed lot of all 10mm Bolts with all shown washers and nuts. Everything shown in the pictures is included except the ruler. 3 bolts length 15mm 4 bolts length 14mm 4 bolts length 8mm 3 bolts length 6mm 7 bolts length 5mm 7 bolts length 3mm 28 Total!