5 pole, 4 wire, gold-plated contacts Electrical design AC/DC Operating voltage 300 AC/DC Ambient Temperature (C) -20....105 Protection IP 68 Design straight Material Body PVC Material Nut stainless steel 316Ti/1.4571 Connection PVC cable/10mm; 4 x AWG 22 (4 x 0.34mm2) Sheath color grey This is in the package and has never been opened.
If your pads are loose and ready to fall on the next job, replacing is cheep and easy. Start with WD40 from the auto parts store. Let it soak for an hour and wa-la it will come off.
SPIRAL FLUTED METRIC LEFT HANDED TAP NATC M12 X 1.5 HSSE THREADING TOOLSPIRAL FLUTED TAP These taps, as the name implies, are made with spiral flutes instead of straight flutes. This spiral fluting feature aids in drawing chips out of a hole, or serves to bridge a gap inside the hole such as a keyway or cross-hole.Slow spiral (25-30° helix angle).Left Handed.High-speed steel ‘exotic’ (HSSE). MADE IN USA!
Brand New - Sealed - Never Open - Free Shipping(NO SHIPED RI, HI, GU, PR, AK, VI,PO) Milwaukee 2571-21 M12 12-Volt Lithium-Ion Drain Snake Kit New! The M12 Drain Snake is the ultimate service plumbing solution for tough jobs through 2-1/2 in. drain lines; and weighing only 10 lbs., it’s the lightest professional
Smith Little Torch Set with 5 pcs Nozzles With Numbers: #1,#2,#3,#4,#5 +Double Hoses with 2m.length + Regulators for disposable bottles: 1pcs Oxygen regulator for bottles with Connection M12 x 1 RH Thread. 1 pcs Gas regulator for bottles with thread 14.1-16 Oz (25mm. OUTSIDE throat thread) disposable fuel cylinders:propane, mapp, and propylene fuels.
PRODUCT DESCRIPTION Lumberg Automation M12 / M8 Splitter Double Ended (ASB2-RKMV3-90/1.5) M12, 4-pole male straight to TWO M8, 3-pole male straight Cable length: 1.5 meters New part number: ASB 2-RKMV/LED A 3-224/1.5M Alt part number: ASB 2-RKMV/LED A 3-90/1.5M Technical Condition Used. This item has been inspected and appears to be in good condition Approximate Shipping Weight/Dims 1 lbs. 4 x 4 x 2 Inches Questions?
Master 8” Power Chuck by Auto-Grip Power Chucks for 'new' machines or replacements, dimensionally and operationally equal to current market standards 1.5mm x 60 deg Jaw Serrations Standard
ISO 30 ER32 Collet Chuck Tool Holder Balanced to 20,000 RPM This is a brand new unused collet that I purchased here on eBay that ended up being the wrong size. Product features: Dynamically balanced to 20,000RPM at G2.5 by Haimer balancing machine at all location for consistent balance Unique design feature in the extension nose to minimize the off-balance nature of CAT 40 taper specification. On the side of flange a flat is cut to compe
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.
