+ Post new Ad
Machinist Material Jack & Jack Parts, US $490 – Picture 0
Machinist Material Jack & Jack Parts, US $490 – Picture 0

Machinist Material Jack & Jack Parts

US $490

  • Paris, Ohio, United States
  • Jun 12th
Open on mobile:
QR code
You are Bidding on 1 Machinist Material Jack and 4 Jack parts Good Condition Nice Shape Good Condition Please Look closely at the photos. I describe the items I sell to the best of my knowledge. I try to research each Item so that I can Accurately describe it to you. In some cases there are items that have no makers marks or patent numbers, which make it very hard to research. Therefore, If i have misidentified an item your input would be greatly appreciated. See Pictures for other details Please read the descriptions carefully, If you have questions please ask as I do not take returns. Shipping Info: If you are the winning bidder, this  item will be shipped to the address verified by ebay. If you have moved please change your address before paying to avoid having your item shipped to the wrong address The cost of shipping is calculated by The United States Postal Service. I enter a weight and USPS calculates the cost by weight, package size and the distance it has to travel. I do combine ship on multiple items purchased I ship USPS Priority. Please note: Once an item leaves my facility I have no control over how long it takes to be delivered to you. Note to overseas bidders: I do not decide the cost of shipping over seas the United State Postal Service Does. In some cases, shipping items parcel post is not an option due to weight, Package size, or country of destination. So Please do not blame me for the high cost of over seas shipping. I Only Communicate in English

Directions

Similar products from Other Workholding Tools

MAGNETIC LIFTER,13# 3.5"DIA

MAGNETIC LIFTER,13# 3.5"DIA

  • Mountain View, Arkansas, United States
  • Jun 16th
Record BC924 High Tensile Bolt Cutter 24" Long MADE IN ENGLAND

Record BC924 High Tensile Bolt Cutter 24" Long MADE IN ENGLAND

  • Anchorage, Alaska, United States
  • Jun 14th
Cleco Runner Monogram Aerospace CBHT-01 Cylindrical Cleco Donut Install/ removal

Cleco Runner Monogram Aerospace CBHT-01 Cylindrical Cleco Donut Install/ removal

  • Weatherford, Texas, United States
  • Jun 14th
Hydraulic 2 jaw self centering chuck

Hydraulic 2 jaw self centering chuck

  • Mark, Illinois, United States
  • Jun 14th
4 Sets of 6 Pair of NEW Enco Parallels 1/8 x 6 inches long 1/2 to 1-5/8 tall!

4 Sets of 6 Pair of NEW Enco Parallels 1/8 x 6 inches long 1/2 to 1-5/8 tall!

  • Troy, Missouri, United States
  • Jun 14th
Machinist Screw Jack Set (MT-02)

Machinist Screw Jack Set (MT-02)

  • Waterbury, Connecticut, United States
  • Jun 13th
Machinist Tools: 6 South Bend Lathe Dogs & Drive NOS, Faceplate 1-1/2"-8 TPI

Machinist Tools: 6 South Bend Lathe Dogs & Drive NOS, Faceplate 1-1/2"-8 TPI

  • Tewksbury, Massachusetts, United States
  • Jun 13th
Airetool tube expanders

Airetool tube expanders

  • Tomball, Texas, United States
  • Jun 13th
Morse Taper 2 MT Lathe Milling Tool Holder

Morse Taper 2 MT Lathe Milling Tool Holder

  • Youngstown, Ohio, United States
  • Jun 13th
Lathe Milling Tool Holder

Lathe Milling Tool Holder

  • Youngstown, Ohio, United States
  • Jun 13th
9 South Bend Lathe 9" And 10" Gear Cover With Mounting Bracket ..

9 South Bend Lathe 9" And 10" Gear Cover With Mounting Bracket ..

  • Melbourne, Florida, United States
  • Jun 10th
ENERPAC SERVICE PARTS B3304K NEW 1298G Seal Kit Repair Kit

ENERPAC SERVICE PARTS B3304K NEW 1298G Seal Kit Repair Kit

  • Chicago, Illinois, United States
  • Jun 9th
^^SIGNATONE MODEL S-725-SRM MICROPOSITIONER

^^SIGNATONE MODEL S-725-SRM MICROPOSITIONER

  • Bosque Farms, New Mexico, United States
  • Jun 9th
MAG-MATE PNL0800 Lifting Magnet, 800 lb Cap, 7-7/8 In OAL, FREE SHIPPING, @PA@

MAG-MATE PNL0800 Lifting Magnet, 800 lb Cap, 7-7/8 In OAL, FREE SHIPPING, @PA@

  • Saint Louis, Missouri, United States
  • Jun 9th
NEW HAAS TL-1 LATHE STEADY REST

NEW HAAS TL-1 LATHE STEADY REST

  • West Berlin, New Jersey, United States
  • Jun 9th
MACHINIST TOOL LATHE Machinist Lot of 2 Starrett Screw Jack s for Set Up

MACHINIST TOOL LATHE Machinist Lot of 2 Starrett Screw Jack s for Set Up

  • Morris Plains, New Jersey, United States
  • Jun 9th
Original Southbend 16 Inch Steady Rest Lathe 16-125

Original Southbend 16 Inch Steady Rest Lathe 16-125

  • Van Meter, Iowa, United States
  • Jun 9th
Steel Adapter Plate Tool Grade 1018

Steel Adapter Plate Tool Grade 1018

  • Hudson, New York, United States
  • Jun 9th
MACHINSTS JACK WITH RISERS EXTENTIONS EXTRAS STARRETT

MACHINSTS JACK WITH RISERS EXTENTIONS EXTRAS STARRETT

  • Carol Stream, Illinois, United States
  • Jun 9th
Alpha A-Pod Magnetic Workholding System 10 Magnets w/ Controller Milling Magnet

Alpha A-Pod Magnetic Workholding System 10 Magnets w/ Controller Milling Magnet

  • Helenville, Wisconsin, United States
  • Jun 9th

People who viewed this item also vieved

MATCHING SET OF 2 No.271A STARRETT MACHINIST V-BLOCKS 1 1/4" X 1/14" X 1 1/4

MATCHING SET OF 2 No.271A STARRETT MACHINIST V-BLOCKS 1 1/4" X 1/14" X 1 1/4

  • Hopatcong, New Jersey, United States
  • Jan 30th
Schmidt multiple Metal Stamps Letters and Numbers 6 Holders

Schmidt multiple Metal Stamps Letters and Numbers 6 Holders

  • Granger, Indiana, United States
  • Jan 30th
MACHINIST LATHE MILL 2 Small Starrett V Blocks and Clamp for Sherline

MACHINIST LATHE MILL 2 Small Starrett V Blocks and Clamp for Sherline

  • Morris Plains, New Jersey, United States
  • Jan 30th
USED GORHAM #20 JARNO LATHE DEAD CENTER #81859 (2.50" Point Diameter)

USED GORHAM #20 JARNO LATHE DEAD CENTER #81859 (2.50" Point Diameter)

  • Fairfield, Iowa, United States
  • Jan 30th
NICE ROYAL LIVE CENTER 10105, 5MT MORSE TAPER LATHE HARDINGE LEBLONDE JET

NICE ROYAL LIVE CENTER 10105, 5MT MORSE TAPER LATHE HARDINGE LEBLONDE JET

  • Hopkins, Minnesota, United States
  • Jan 30th
DEAD CENTER MORSE TAPER #5 9.5" OAL (LOC1228A) TS12

DEAD CENTER MORSE TAPER #5 9.5" OAL (LOC1228A) TS12

  • Laingsburg, Michigan, United States
  • Jan 30th
6” STEEL HARD JAWS 1.5MM X 60° SERRATED FOR KITAGAWA B-206 TYPE LATHE CHUCKS

6” STEEL HARD JAWS 1.5MM X 60° SERRATED FOR KITAGAWA B-206 TYPE LATHE CHUCKS

  • Chino, California, United States
  • Jan 30th
NEW ROHM KZF POWER OPERATED COLLET CHUCK CNC LATHE

NEW ROHM KZF POWER OPERATED COLLET CHUCK CNC LATHE

  • Cleveland, Ohio, United States
  • Jan 30th
BUCK 5C PULLBACK COLLET CHUCK W/ HARDINGE 2" STEP CHUCK OC CLOSER A2-6

BUCK 5C PULLBACK COLLET CHUCK W/ HARDINGE 2" STEP CHUCK OC CLOSER A2-6

  • Cleveland, Ohio, United States
  • Jan 30th
Clamp, Machine and Die Hold Down Clamps

Clamp, Machine and Die Hold Down Clamps

  • Scottsboro, Alabama, United States
  • Jan 30th
Uxcell a11120300ux0073 Metal 163Kg 359-Pound Holder Capacity Push Pull Toggle Cl

Uxcell a11120300ux0073 Metal 163Kg 359-Pound Holder Capacity Push Pull Toggle Cl

  • United States
  • Jan 30th
Irwin 223106 Quick-Grip Clutch Lock Bar Clamp-6" CLUTCH LOCK BAR CLAMP

Irwin 223106 Quick-Grip Clutch Lock Bar Clamp-6" CLUTCH LOCK BAR CLAMP

  • Brooklyn, New York, United States
  • Jan 30th
USED PARLEC NMTB50 DA200 DOUBLE ANGLE COLLET CHUCK DA-200 x 11-1/4" Gage USA

USED PARLEC NMTB50 DA200 DOUBLE ANGLE COLLET CHUCK DA-200 x 11-1/4" Gage USA

  • Fairfield, Iowa, United States
  • Jan 30th
USED PARLEC NMTB50 DA200 DOUBLE ANGLE COLLET CHUCK DA-200 x 13-1/8" Gage USA

USED PARLEC NMTB50 DA200 DOUBLE ANGLE COLLET CHUCK DA-200 x 13-1/8" Gage USA

  • Fairfield, Iowa, United States
  • Jan 30th
USED KAISER NMTB-50 TG-150 SINGLE ANGLE COLLET CHUCK NMTB50 x TG150 x 4.25"Gage

USED KAISER NMTB-50 TG-150 SINGLE ANGLE COLLET CHUCK NMTB50 x TG150 x 4.25"Gage

  • Fairfield, Iowa, United States
  • Jan 30th
47/64" ACURA-GRIP #901250 Collet

47/64" ACURA-GRIP #901250 Collet

  • Lebanon, Tennessee, United States
  • Jan 30th
1-11/32" ACURA-GRIP #901375 Collet

1-11/32" ACURA-GRIP #901375 Collet

  • Lebanon, Tennessee, United States
  • Jan 30th
1-9/32" ACURA-GRIP #901375 Collet

1-9/32" ACURA-GRIP #901375 Collet

  • Lebanon, Tennessee, United States
  • Jan 30th
Ball Nut Mount/Bracket Flange Nut Mount For 1604&1605&1610 16mm Ball Screw

Ball Nut Mount/Bracket Flange Nut Mount For 1604&1605&1610 16mm Ball Screw

  • CN,CN, China
  • Jan 30th
CNC ball nut housings bracket fit RM1605 Ball screws Flange nut USG

CNC ball nut housings bracket fit RM1605 Ball screws Flange nut USG

  • CN,CN, China
  • Jan 30th
Cisco 3900 Router Faceplate for Replacement 3925/3925E/3945/3945E

Cisco 3900 Router Faceplate for Replacement 3925/3925E/3945/3945E

  • Hong kong, Hong Kong
  • Jan 30th
Ferguson Econo-Dex Index Table ED450-8-300 Great Condition!

Ferguson Econo-Dex Index Table ED450-8-300 Great Condition!

  • DeKalb, Illinois, United States
  • Jan 30th
15" 15 Bridgeport Rotary Table

15" 15 Bridgeport Rotary Table

  • DeKalb, Illinois, United States
  • Jan 30th
Wendespanner Peiseler Typ : EW 1000 CNC rotary table & Wheel Pulse

Wendespanner Peiseler Typ : EW 1000 CNC rotary table & Wheel Pulse

  • Shanghai,Shanghai, China
  • Jan 30th
columbian swivel vise #604

columbian swivel vise #604

  • East Aurora, New York, United States
  • Jan 30th
3" Precision Grinding Toolmakers Steel Vise 0.0002

3" Precision Grinding Toolmakers Steel Vise 0.0002

  • San Gabriel, California, United States
  • Jan 30th
3" Precision Toolmakers Vise Machinist Milling

3" Precision Toolmakers Vise Machinist Milling

  • San Gabriel, California, United States
  • Jan 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies